* feat: switch managed browser provider from Browserbase to Browser Use
The Nous subscription tool gateway now routes browser automation through
Browser Use instead of Browserbase. This commit:
- Adds managed Nous gateway support to BrowserUseProvider (idempotency
keys, X-BB-API-Key auth header, external_call_id persistence)
- Removes managed gateway support from BrowserbaseProvider (now
direct-only via BROWSERBASE_API_KEY/BROWSERBASE_PROJECT_ID)
- Updates browser_tool.py fallback: prefers Browser Use over Browserbase
- Updates nous_subscription.py: gateway vendor 'browser-use', auto-config
sets cloud_provider='browser-use' for new subscribers
- Updates tools_config.py: Nous Subscription entry now uses Browser Use
- Updates setup.py, cli.py, status.py, prompt_builder.py display strings
- Updates all affected tests to match new behavior
Browserbase remains fully functional for users with direct API credentials.
The change only affects the managed/subscription path.
* chore: remove redundant Browser Use hint from system prompt
* fix: upgrade Browser Use provider to v3 API
- Base URL: api/v2 -> api/v3 (v2 is legacy)
- Unified all endpoints to use native Browser Use paths:
- POST /browsers (create session, returns cdpUrl)
- PATCH /browsers/{id} with {action: stop} (close session)
- Removed managed-mode branching that used Browserbase-style
/v1/sessions paths — v3 gateway now supports /browsers directly
- Removed unused managed_mode variable in close_session
* fix(browser-use): use X-Browser-Use-API-Key header for managed mode
The managed gateway expects X-Browser-Use-API-Key, not X-BB-API-Key
(which is a Browserbase-specific header). Using the wrong header caused
a 401 AUTH_ERROR on every managed-mode browser session create.
Simplified _headers() to always use X-Browser-Use-API-Key regardless
of direct vs managed mode.
* fix(nous_subscription): browserbase explicit provider is direct-only
Since managed Nous gateway now routes through Browser Use, the
browserbase explicit provider path should not check managed_browser_available
(which resolves against the browser-use gateway). Simplified to direct-only
with managed=False.
* fix(browser-use): port missing improvements from PR #5605
- CDP URL normalization: resolve HTTP discovery URLs to websocket after
cloud provider create_session() (prevents agent-browser failures)
- Managed session payload: send timeout=5 and proxyCountryCode=us for
gateway-backed sessions (prevents billing overruns)
- Update prompt builder, browser_close schema, and module docstring to
replace remaining Browserbase references with Browser Use
- Dynamic /browser status detection via _get_cloud_provider() instead
of hardcoded env var checks (future-proof for new providers)
- Rename post_setup key from 'browserbase' to 'agent_browser'
- Update setup hint to mention Browser Use alongside Browserbase
- Add tests: CDP normalization, browserbase direct-only guard,
managed browser-use gateway, direct browserbase fallback
---------
Co-authored-by: rob-maron <132852777+rob-maron@users.noreply.github.com>
launchctl kickstart returns exit code 113 ("Could not find service") when
the plist exists but the job hasn't been bootstrapped into the runtime domain.
The existing recovery path only caught exit code 3 ("unloaded"), causing an
unhandled CalledProcessError.
Exit code 113 means the same thing practically -- the service definition needs
bootstrapping before it can be kicked. Add it to the same recovery path that
already handles exit 3, matching the existing pattern in launchd_stop().
Follow-up: add a unit test covering the 113 recovery path.
Centralize the skill → slash command registration that Telegram already had
in commands.py so Discord uses the exact same priority system, filtering,
and cap enforcement:
1. Core/built-in commands (never trimmed)
2. Plugin commands (never trimmed)
3. Skill commands (fill remaining slots, alphabetical, only tier trimmed)
Changes:
hermes_cli/commands.py:
- Rename _TG_NAME_LIMIT → _CMD_NAME_LIMIT (32 chars shared by both platforms)
- Rename _clamp_telegram_names → _clamp_command_names (generic)
- Extract _collect_gateway_skill_entries() — shared plugin + skill
collection with platform filtering, name sanitization, description
truncation, and cap enforcement
- Refactor telegram_menu_commands() to use the shared helper
- Add discord_skill_commands() that returns (name, desc, cmd_key) triples
- Preserve _sanitize_telegram_name() for Telegram-specific name cleaning
gateway/platforms/discord.py:
- Call discord_skill_commands() from _register_slash_commands()
- Create app_commands.Command per skill entry with cmd_key callback
- Respect 100-command global Discord limit
- Log warning when skills are skipped due to cap
Backward-compat aliases preserved for _TG_NAME_LIMIT and
_clamp_telegram_names.
Tests: 9 new tests (7 Discord + 2 backward-compat), 98 total pass.
Inspired by PR #5498 (sprmn24). Closes#5480.
Telegram Bot API requires command names to contain only lowercase a-z,
digits 0-9, and underscores. Skill/plugin names containing characters
like +, /, @, or . caused set_my_commands to fail with
Bot_command_invalid.
Two-layer fix:
- scan_skill_commands(): strip non-alphanumeric/non-hyphen chars from
cmd_key at source, collapse consecutive hyphens, trim edges, skip
names that sanitize to empty string
- _sanitize_telegram_name(): centralized helper used by all 3 Telegram
name generation sites (core commands, plugin commands, skill commands)
with empty-name guard at each call site
Closes#5534
After restarting a service-managed gateway (systemd/launchd), the
stale-process sweep calls find_gateway_pids() which returns ALL gateway
PIDs via ps aux — including the one just spawned by the service manager.
The sweep kills it, leaving the user with a stopped gateway and a
confusing 'Restart manually' message.
Fix: add _get_service_pids() to query systemd MainPID and launchd PID
for active gateway services, then exclude those PIDs from the sweep.
Also add exclude_pids parameter to find_gateway_pids() and
kill_gateway_processes() so callers can skip known service-managed PIDs.
Adds 9 targeted tests covering:
- _get_service_pids() for systemd, launchd, empty, and zero-PID cases
- find_gateway_pids() exclude_pids filtering
- cmd_update integration: service PID not killed after restart
- cmd_update integration: manual PID killed while service PID preserved
Add validate_config_structure() that catches common config.yaml mistakes:
- custom_providers as dict instead of list (missing '-' in YAML)
- fallback_model accidentally nested inside another section
- custom_providers entries missing required fields (name, base_url)
- Missing model section when custom_providers is configured
- Root-level keys that look like misplaced custom_providers fields
Surface these diagnostics at three levels:
1. Startup: print_config_warnings() runs at CLI and gateway module load,
so users see issues before hitting cryptic errors
2. Error time: 'Unknown provider' errors in auth.py and model_switch.py
now include config diagnostics with fix suggestions
3. Doctor: 'hermes doctor' shows a Config Structure section with all
issues and fix hints
Also adds a warning log in runtime_provider.py when custom_providers
is a dict (previously returned None silently).
Motivated by a Discord user who had malformed custom_providers YAML
and got only 'Unknown Provider' with no guidance on what was wrong.
17 new tests covering all validation paths.
All 35 subprocess.run() calls in hermes_cli/gateway.py lacked timeout
parameters. If systemctl, launchctl, loginctl, wmic, or ps blocks,
hermes gateway start/stop/restart/status/install/uninstall hangs
indefinitely with no feedback.
Timeouts tiered by operation type:
- 10s: instant queries (is-active, status, list, ps, tail, journalctl)
- 30s: fast lifecycle (daemon-reload, enable, start, bootstrap, kickstart)
- 90s: graceful shutdown (stop, restart, bootout, kickstart -k) — exceeds
our TimeoutStopSec=60 to avoid premature timeout during shutdown
Special handling: _is_service_running() and launchd_status() catch
TimeoutExpired and treat it as not-running/not-loaded, consistent with
how non-zero return codes are already handled.
Inspired by PR #3732 (dlkakbs) and issue #4057 (SHL0MS).
Reimplemented on current main which has significantly changed launchctl
handling (bootout/bootstrap/kickstart vs legacy load/unload/start/stop).
Removing an env-seeded credential (e.g. from OPENROUTER_API_KEY) via
'hermes auth' previously had no lasting effect -- the entry was deleted
from auth.json but load_pool() re-created it on the next call because
the env var was still set.
Now auth_remove_command detects env-sourced entries (source starts with
'env:') and calls the new remove_env_value() to strip the var from both
.env and os.environ, preventing re-seeding.
Changes:
- hermes_cli/config.py: add remove_env_value() -- atomically removes a
line from .env and pops from os.environ
- hermes_cli/auth_commands.py: auth_remove_command clears env var when
removing an env-seeded pool entry
- 8 new tests covering remove_env_value and the full zombie-credential
lifecycle (remove -> reload -> stays gone)
Replace the two-step stop/start restart with a single
launchctl kickstart -k call. When the gateway triggers a
restart from inside its own process tree, the old stop
command kills the shell before the start half is reached.
kickstart -k lets launchd handle the kill+restart atomically.
launchctl load/unload/start/stop are deprecated on macOS since 10.10
and fail silently on modern versions. This replaces them with the
current equivalents:
- load -> bootstrap gui/<uid> <plist>
- unload -> bootout gui/<uid>/<label>
- start -> kickstart gui/<uid>/<label>
- stop -> kill SIGTERM gui/<uid>/<label>
Adds _launchd_domain() helper returning the gui/<uid> target domain.
Updates test assertions to match the new command signatures.
Fixes#4820
Cherry-picked from PR #5136 by thakoreh.
setup_gateway() uses shutil.which('uv') at line 2126 but shutil was
never imported at module level, causing NameError during Matrix E2EE
auto-install. Adds top-level import and regression test.
When --yolo, -w, -s, -r, -c, and --pass-session-id exist on both the parent
parser and the 'chat' subparser with explicit defaults (default=False or
default=None), argparse's subparser initialization overwrites the parent's
parsed value. So 'hermes --yolo chat' silently drops --yolo, making it appear
broken.
Fix: use default=argparse.SUPPRESS on all duplicated arguments in the chat
subparser. SUPPRESS means 'don't set this attribute if the user didn't
explicitly provide it', so the parent parser's value survives through.
Affected flags: --yolo, --worktree/-w, --skills/-s, --pass-session-id,
--resume/-r, --continue/-c.
Adds 15 regression tests covering flag-before-subcommand, flag-after-subcommand,
no-subcommand, and env var propagation scenarios.
gateway stop and restart previously called kill_gateway_processes() which
scans ps aux and kills ALL gateway processes across all profiles. Starting
a profile gateway would nuke the main one (and vice versa).
Now:
- hermes gateway stop → only kills the current profile's gateway (PID file)
- hermes -p work gateway stop → only kills the 'work' profile's gateway
- hermes gateway stop --all → kills every gateway process (old behavior)
- hermes gateway restart → profile-scoped for manual fallback path
- hermes update → discovers and restarts ALL profile gateways (systemctl
list-units hermes-gateway*) since the code update is shared
Added stop_profile_gateway() which uses the HERMES_HOME-scoped PID file
instead of global process scanning.
Three interconnected bugs caused `hermes skills config` per-platform
settings to be silently ignored:
1. telegram_menu_commands() never filtered disabled skills — all skills
consumed menu slots regardless of platform config, hitting Telegram's
100 command cap. Now loads disabled skills for 'telegram' and excludes
them from the menu.
2. Gateway skill dispatch executed disabled skills because
get_skill_commands() (process-global cache) only filters by the global
disabled list at scan time. Added per-platform check before execution,
returning an actionable 'skill is disabled' message.
3. get_disabled_skill_names() only checked HERMES_PLATFORM env var, but
the gateway sets HERMES_SESSION_PLATFORM instead. Added
HERMES_SESSION_PLATFORM as fallback, plus an explicit platform=
parameter for callers that know their platform (menu builder, gateway
dispatch). Also added platform to prompt_builder's skills cache key
so multi-platform gateways get correct per-platform skill prompts.
Reported by SteveSkedasticity (CLAW community).
Follow-up for salvaged PR #2352:
- Replace hardcoded Path(os.getenv('HERMES_HOME', ...)) with
get_hermes_home() from hermes_constants (2 places)
- Consolidate redundant git_cmd_base into the existing git_cmd
variable, constructed once before fork detection
- Update autostash tests for the unmerged index check added
in the previous commit
launchd_restart() already prints stop/start confirmation via its
internal helpers — the extra 'Gateway restarted via launchd' line
was redundant. Update test assertion to match.
Previously, `hermes gateway install --system` hard-refused to create a
service running as root, even when explicitly requested via
`--run-as-user root`. This forced LXC/container users (where root is
the only user) to either create throwaway users or comment out the check
in source.
Changes:
- Auto-detected root (no explicit --run-as-user) still raises, but with
a message explaining how to override
- Explicit `--run-as-user root` now allowed with a warning about
security implications
- Interactive setup wizard prompt accepts 'root' as a valid username
(warning comes from _system_service_identity downstream)
- Added tests for all three paths: auto-detected root rejection,
explicit root allowance, and normal non-root passthrough
* feat(memory): add pluggable memory provider interface with profile isolation
Introduces a pluggable MemoryProvider ABC so external memory backends can
integrate with Hermes without modifying core files. Each backend becomes a
plugin implementing a standard interface, orchestrated by MemoryManager.
Key architecture:
- agent/memory_provider.py — ABC with core + optional lifecycle hooks
- agent/memory_manager.py — single integration point in the agent loop
- agent/builtin_memory_provider.py — wraps existing MEMORY.md/USER.md
Profile isolation fixes applied to all 6 shipped plugins:
- Cognitive Memory: use get_hermes_home() instead of raw env var
- Hindsight Memory: check $HERMES_HOME/hindsight/config.json first,
fall back to legacy ~/.hindsight/ for backward compat
- Hermes Memory Store: replace hardcoded ~/.hermes paths with
get_hermes_home() for config loading and DB path defaults
- Mem0 Memory: use get_hermes_home() instead of raw env var
- RetainDB Memory: auto-derive profile-scoped project name from
hermes_home path (hermes-<profile>), explicit env var overrides
- OpenViking Memory: read-only, no local state, isolation via .env
MemoryManager.initialize_all() now injects hermes_home into kwargs so
every provider can resolve profile-scoped storage without importing
get_hermes_home() themselves.
Plugin system: adds register_memory_provider() to PluginContext and
get_plugin_memory_providers() accessor.
Based on PR #3825. 46 tests (37 unit + 5 E2E + 4 plugin registration).
* refactor(memory): drop cognitive plugin, rewrite OpenViking as full provider
Remove cognitive-memory plugin (#727) — core mechanics are broken:
decay runs 24x too fast (hourly not daily), prefetch uses row ID as
timestamp, search limited by importance not similarity.
Rewrite openviking-memory plugin from a read-only search wrapper into
a full bidirectional memory provider using the complete OpenViking
session lifecycle API:
- sync_turn: records user/assistant messages to OpenViking session
(threaded, non-blocking)
- on_session_end: commits session to trigger automatic memory extraction
into 6 categories (profile, preferences, entities, events, cases,
patterns)
- prefetch: background semantic search via find() endpoint
- on_memory_write: mirrors built-in memory writes to the session
- is_available: checks env var only, no network calls (ABC compliance)
Tools expanded from 3 to 5:
- viking_search: semantic search with mode/scope/limit
- viking_read: tiered content (abstract ~100tok / overview ~2k / full)
- viking_browse: filesystem-style navigation (list/tree/stat)
- viking_remember: explicit memory storage via session
- viking_add_resource: ingest URLs/docs into knowledge base
Uses direct HTTP via httpx (no openviking SDK dependency needed).
Response truncation on viking_read to prevent context flooding.
* fix(memory): harden Mem0 plugin — thread safety, non-blocking sync, circuit breaker
- Remove redundant mem0_context tool (identical to mem0_search with
rerank=true, top_k=5 — wastes a tool slot and confuses the model)
- Thread sync_turn so it's non-blocking — Mem0's server-side LLM
extraction can take 5-10s, was stalling the agent after every turn
- Add threading.Lock around _get_client() for thread-safe lazy init
(prefetch and sync threads could race on first client creation)
- Add circuit breaker: after 5 consecutive API failures, pause calls
for 120s instead of hammering a down server every turn. Auto-resets
after cooldown. Logs a warning when tripped.
- Track success/failure in prefetch, sync_turn, and all tool calls
- Wait for previous sync to finish before starting a new one (prevents
unbounded thread accumulation on rapid turns)
- Clean up shutdown to join both prefetch and sync threads
* fix(memory): enforce single external memory provider limit
MemoryManager now rejects a second non-builtin provider with a warning.
Built-in memory (MEMORY.md/USER.md) is always accepted. Only ONE
external plugin provider is allowed at a time. This prevents tool
schema bloat (some providers add 3-5 tools each) and conflicting
memory backends.
The warning message directs users to configure memory.provider in
config.yaml to select which provider to activate.
Updated all 47 tests to use builtin + one external pattern instead
of multiple externals. Added test_second_external_rejected to verify
the enforcement.
* feat(memory): add ByteRover memory provider plugin
Implements the ByteRover integration (from PR #3499 by hieuntg81) as a
MemoryProvider plugin instead of direct run_agent.py modifications.
ByteRover provides persistent memory via the brv CLI — a hierarchical
knowledge tree with tiered retrieval (fuzzy text then LLM-driven search).
Local-first with optional cloud sync.
Plugin capabilities:
- prefetch: background brv query for relevant context
- sync_turn: curate conversation turns (threaded, non-blocking)
- on_memory_write: mirror built-in memory writes to brv
- on_pre_compress: extract insights before context compression
Tools (3):
- brv_query: search the knowledge tree
- brv_curate: store facts/decisions/patterns
- brv_status: check CLI version and context tree state
Profile isolation: working directory at $HERMES_HOME/byterover/ (scoped
per profile). Binary resolution cached with thread-safe double-checked
locking. All write operations threaded to avoid blocking the agent
(curate can take 120s with LLM processing).
* fix(memory): thread remaining sync_turns, fix holographic, add config key
Plugin fixes:
- Hindsight: thread sync_turn (was blocking up to 30s via _run_in_thread)
- RetainDB: thread sync_turn (was blocking on HTTP POST)
- Both: shutdown now joins sync threads alongside prefetch threads
Holographic retrieval fixes:
- reason(): removed dead intersection_key computation (bundled but never
used in scoring). Now reuses pre-computed entity_residuals directly,
moved role_content encoding outside the inner loop.
- contradict(): added _MAX_CONTRADICT_FACTS=500 scaling guard. Above
500 facts, only checks the most recently updated ones to avoid O(n^2)
explosion (~125K comparisons at 500 is acceptable).
Config:
- Added memory.provider key to DEFAULT_CONFIG ("" = builtin only).
No version bump needed (deep_merge handles new keys automatically).
* feat(memory): extract Honcho as a MemoryProvider plugin
Creates plugins/honcho-memory/ as a thin adapter over the existing
honcho_integration/ package. All 4 Honcho tools (profile, search,
context, conclude) move from the normal tool registry to the
MemoryProvider interface.
The plugin delegates all work to HonchoSessionManager — no Honcho
logic is reimplemented. It uses the existing config chain:
$HERMES_HOME/honcho.json -> ~/.honcho/config.json -> env vars.
Lifecycle hooks:
- initialize: creates HonchoSessionManager via existing client factory
- prefetch: background dialectic query
- sync_turn: records messages + flushes to API (threaded)
- on_memory_write: mirrors user profile writes as conclusions
- on_session_end: flushes all pending messages
This is a prerequisite for the MemoryManager wiring in run_agent.py.
Once wired, Honcho goes through the same provider interface as all
other memory plugins, and the scattered Honcho code in run_agent.py
can be consolidated into the single MemoryManager integration point.
* feat(memory): wire MemoryManager into run_agent.py
Adds 8 integration points for the external memory provider plugin,
all purely additive (zero existing code modified):
1. Init (~L1130): Create MemoryManager, find matching plugin provider
from memory.provider config, initialize with session context
2. Tool injection (~L1160): Append provider tool schemas to self.tools
and self.valid_tool_names after memory_manager init
3. System prompt (~L2705): Add external provider's system_prompt_block
alongside existing MEMORY.md/USER.md blocks
4. Tool routing (~L5362): Route provider tool calls through
memory_manager.handle_tool_call() before the catchall handler
5. Memory write bridge (~L5353): Notify external provider via
on_memory_write() when the built-in memory tool writes
6. Pre-compress (~L5233): Call on_pre_compress() before context
compression discards messages
7. Prefetch (~L6421): Inject provider prefetch results into the
current-turn user message (same pattern as Honcho turn context)
8. Turn sync + session end (~L8161, ~L8172): sync_all() after each
completed turn, queue_prefetch_all() for next turn, on_session_end()
+ shutdown_all() at conversation end
All hooks are wrapped in try/except — a failing provider never breaks
the agent. The existing memory system, Honcho integration, and all
other code paths are completely untouched.
Full suite: 7222 passed, 4 pre-existing failures.
* refactor(memory): remove legacy Honcho integration from core
Extracts all Honcho-specific code from run_agent.py, model_tools.py,
toolsets.py, and gateway/run.py. Honcho is now exclusively available
as a memory provider plugin (plugins/honcho-memory/).
Removed from run_agent.py (-457 lines):
- Honcho init block (session manager creation, activation, config)
- 8 Honcho methods: _honcho_should_activate, _strip_honcho_tools,
_activate_honcho, _register_honcho_exit_hook, _queue_honcho_prefetch,
_honcho_prefetch, _honcho_save_user_observation, _honcho_sync
- _inject_honcho_turn_context module-level function
- Honcho system prompt block (tool descriptions, CLI commands)
- Honcho context injection in api_messages building
- Honcho params from __init__ (honcho_session_key, honcho_manager,
honcho_config)
- HONCHO_TOOL_NAMES constant
- All honcho-specific tool dispatch forwarding
Removed from other files:
- model_tools.py: honcho_tools import, honcho params from handle_function_call
- toolsets.py: honcho toolset definition, honcho tools from core tools list
- gateway/run.py: honcho params from AIAgent constructor calls
Removed tests (-339 lines):
- 9 Honcho-specific test methods from test_run_agent.py
- TestHonchoAtexitFlush class from test_exit_cleanup_interrupt.py
Restored two regex constants (_SURROGATE_RE, _BUDGET_WARNING_RE) that
were accidentally removed during the honcho function extraction.
The honcho_integration/ package is kept intact — the plugin delegates
to it. tools/honcho_tools.py registry entries are now dead code (import
commented out in model_tools.py) but the file is preserved for reference.
Full suite: 7207 passed, 4 pre-existing failures. Zero regressions.
* refactor(memory): restructure plugins, add CLI, clean gateway, migration notice
Plugin restructure:
- Move all memory plugins from plugins/<name>-memory/ to plugins/memory/<name>/
(byterover, hindsight, holographic, honcho, mem0, openviking, retaindb)
- New plugins/memory/__init__.py discovery module that scans the directory
directly, loading providers by name without the general plugin system
- run_agent.py uses load_memory_provider() instead of get_plugin_memory_providers()
CLI wiring:
- hermes memory setup — interactive curses picker + config wizard
- hermes memory status — show active provider, config, availability
- hermes memory off — disable external provider (built-in only)
- hermes honcho — now shows migration notice pointing to hermes memory setup
Gateway cleanup:
- Remove _get_or_create_gateway_honcho (already removed in prev commit)
- Remove _shutdown_gateway_honcho and _shutdown_all_gateway_honcho methods
- Remove all calls to shutdown methods (4 call sites)
- Remove _honcho_managers/_honcho_configs dict references
Dead code removal:
- Delete tools/honcho_tools.py (279 lines, import was already commented out)
- Delete tests/gateway/test_honcho_lifecycle.py (131 lines, tested removed methods)
- Remove if False placeholder from run_agent.py
Migration:
- Honcho migration notice on startup: detects existing honcho.json or
~/.honcho/config.json, prints guidance to run hermes memory setup.
Only fires when memory.provider is not set and not in quiet mode.
Full suite: 7203 passed, 4 pre-existing failures. Zero regressions.
* feat(memory): standardize plugin config + add per-plugin documentation
Config architecture:
- Add save_config(values, hermes_home) to MemoryProvider ABC
- Honcho: writes to $HERMES_HOME/honcho.json (SDK native)
- Mem0: writes to $HERMES_HOME/mem0.json
- Hindsight: writes to $HERMES_HOME/hindsight/config.json
- Holographic: writes to config.yaml under plugins.hermes-memory-store
- OpenViking/RetainDB/ByteRover: env-var only (default no-op)
Setup wizard (hermes memory setup):
- Now calls provider.save_config() for non-secret config
- Secrets still go to .env via env vars
- Only memory.provider activation key goes to config.yaml
Documentation:
- README.md for each of the 7 providers in plugins/memory/<name>/
- Requirements, setup (wizard + manual), config reference, tools table
- Consistent format across all providers
The contract for new memory plugins:
- get_config_schema() declares all fields (REQUIRED)
- save_config() writes native config (REQUIRED if not env-var-only)
- Secrets use env_var field in schema, written to .env by wizard
- README.md in the plugin directory
* docs: add memory providers user guide + developer guide
New pages:
- user-guide/features/memory-providers.md — comprehensive guide covering
all 7 shipped providers (Honcho, OpenViking, Mem0, Hindsight,
Holographic, RetainDB, ByteRover). Each with setup, config, tools,
cost, and unique features. Includes comparison table and profile
isolation notes.
- developer-guide/memory-provider-plugin.md — how to build a new memory
provider plugin. Covers ABC, required methods, config schema,
save_config, threading contract, profile isolation, testing.
Updated pages:
- user-guide/features/memory.md — replaced Honcho section with link to
new Memory Providers page
- user-guide/features/honcho.md — replaced with migration redirect to
the new Memory Providers page
- sidebars.ts — added both new pages to navigation
* fix(memory): auto-migrate Honcho users to memory provider plugin
When honcho.json or ~/.honcho/config.json exists but memory.provider
is not set, automatically set memory.provider: honcho in config.yaml
and activate the plugin. The plugin reads the same config files, so
all data and credentials are preserved. Zero user action needed.
Persists the migration to config.yaml so it only fires once. Prints
a one-line confirmation in non-quiet mode.
* fix(memory): only auto-migrate Honcho when enabled + credentialed
Check HonchoClientConfig.enabled AND (api_key OR base_url) before
auto-migrating — not just file existence. Prevents false activation
for users who disabled Honcho, stopped using it (config lingers),
or have ~/.honcho/ from a different tool.
* feat(memory): auto-install pip dependencies during hermes memory setup
Reads pip_dependencies from plugin.yaml, checks which are missing,
installs them via pip before config walkthrough. Also shows install
guidance for external_dependencies (e.g. brv CLI for ByteRover).
Updated all 7 plugin.yaml files with pip_dependencies:
- honcho: honcho-ai
- mem0: mem0ai
- openviking: httpx
- hindsight: hindsight-client
- holographic: (none)
- retaindb: requests
- byterover: (external_dependencies for brv CLI)
* fix: remove remaining Honcho crash risks from cli.py and gateway
cli.py: removed Honcho session re-mapping block (would crash importing
deleted tools/honcho_tools.py), Honcho flush on compress, Honcho
session display on startup, Honcho shutdown on exit, honcho_session_key
AIAgent param.
gateway/run.py: removed honcho_session_key params from helper methods,
sync_honcho param, _honcho.shutdown() block.
tests: fixed test_cron_session_with_honcho_key_skipped (was passing
removed honcho_key param to _flush_memories_for_session).
* fix: include plugins/ in pyproject.toml package list
Without this, plugins/memory/ wouldn't be included in non-editable
installs. Hermes always runs from the repo checkout so this is belt-
and-suspenders, but prevents breakage if the install method changes.
* fix(memory): correct pip-to-import name mapping for dep checks
The heuristic dep.replace('-', '_') fails for packages where the pip
name differs from the import name: honcho-ai→honcho, mem0ai→mem0,
hindsight-client→hindsight_client. Added explicit mapping table so
hermes memory setup doesn't try to reinstall already-installed packages.
* chore: remove dead code from old plugin memory registration path
- hermes_cli/plugins.py: removed register_memory_provider(),
_memory_providers list, get_plugin_memory_providers() — memory
providers now use plugins/memory/ discovery, not the general plugin system
- hermes_cli/main.py: stripped 74 lines of dead honcho argparse
subparsers (setup, status, sessions, map, peer, mode, tokens,
identity, migrate) — kept only the migration redirect
- agent/memory_provider.py: updated docstring to reflect new
registration path
- tests: replaced TestPluginMemoryProviderRegistration with
TestPluginMemoryDiscovery that tests the actual plugins/memory/
discovery system. Added 3 new tests (discover, load, nonexistent).
* chore: delete dead honcho_integration/cli.py and its tests
cli.py (794 lines) was the old 'hermes honcho' command handler — nobody
calls it since cmd_honcho was replaced with a migration redirect.
Deleted tests that imported from removed code:
- tests/honcho_integration/test_cli.py (tested _resolve_api_key)
- tests/honcho_integration/test_config_isolation.py (tested CLI config paths)
- tests/tools/test_honcho_tools.py (tested the deleted tools/honcho_tools.py)
Remaining honcho_integration/ files (actively used by the plugin):
- client.py (445 lines) — config loading, SDK client creation
- session.py (991 lines) — session management, queries, flush
* refactor: move honcho_integration/ into the honcho plugin
Moves client.py (445 lines) and session.py (991 lines) from the
top-level honcho_integration/ package into plugins/memory/honcho/.
No Honcho code remains in the main codebase.
- plugins/memory/honcho/client.py — config loading, SDK client creation
- plugins/memory/honcho/session.py — session management, queries, flush
- Updated all imports: run_agent.py (auto-migration), hermes_cli/doctor.py,
plugin __init__.py, session.py cross-import, all tests
- Removed honcho_integration/ package and pyproject.toml entry
- Renamed tests/honcho_integration/ → tests/honcho_plugin/
* docs: update architecture + gateway-internals for memory provider system
- architecture.md: replaced honcho_integration/ with plugins/memory/
- gateway-internals.md: replaced Honcho-specific session routing and
flush lifecycle docs with generic memory provider interface docs
* fix: update stale mock path for resolve_active_host after honcho plugin migration
* fix(memory): address review feedback — P0 lifecycle, ABC contract, honcho CLI restore
Review feedback from Honcho devs (erosika):
P0 — Provider lifecycle:
- Remove on_session_end() + shutdown_all() from run_conversation() tail
(was killing providers after every turn in multi-turn sessions)
- Add shutdown_memory_provider() method on AIAgent for callers
- Wire shutdown into CLI atexit, reset_conversation, gateway stop/expiry
Bug fixes:
- Remove sync_honcho=False kwarg from /btw callsites (TypeError crash)
- Fix doctor.py references to dead 'hermes honcho setup' command
- Cache prefetch_all() before tool loop (was re-calling every iteration)
ABC contract hardening (all backwards-compatible):
- Add session_id kwarg to prefetch/sync_turn/queue_prefetch
- Make on_pre_compress() return str (provider insights in compression)
- Add **kwargs to on_turn_start() for runtime context
- Add on_delegation() hook for parent-side subagent observation
- Document agent_context/agent_identity/agent_workspace kwargs on
initialize() (prevents cron corruption, enables profile scoping)
- Fix docstring: single external provider, not multiple
Honcho CLI restoration:
- Add plugins/memory/honcho/cli.py (from main's honcho_integration/cli.py
with imports adapted to plugin path)
- Restore full hermes honcho command with all subcommands (status, peer,
mode, tokens, identity, enable/disable, sync, peers, --target-profile)
- Restore auto-clone on profile creation + sync on hermes update
- hermes honcho setup now redirects to hermes memory setup
* fix(memory): wire on_delegation, skip_memory for cron/flush, fix ByteRover return type
- Wire on_delegation() in delegate_tool.py — parent's memory provider
is notified with task+result after each subagent completes
- Add skip_memory=True to cron scheduler (prevents cron system prompts
from corrupting user representations — closes#4052)
- Add skip_memory=True to gateway flush agent (throwaway agent shouldn't
activate memory provider)
- Fix ByteRover on_pre_compress() return type: None -> str
* fix(honcho): port profile isolation fixes from PR #4632
Ports 5 bug fixes found during profile testing (erosika's PR #4632):
1. 3-tier config resolution — resolve_config_path() now checks
$HERMES_HOME/honcho.json → ~/.hermes/honcho.json → ~/.honcho/config.json
(non-default profiles couldn't find shared host blocks)
2. Thread host=_host_key() through from_global_config() in cmd_setup,
cmd_status, cmd_identity (--target-profile was being ignored)
3. Use bare profile name as aiPeer (not host key with dots) — Honcho's
peer ID pattern is ^[a-zA-Z0-9_-]+$, dots are invalid
4. Wrap add_peers() in try/except — was fatal on new AI peers, killed
all message uploads for the session
5. Gate Honcho clone behind --clone/--clone-all on profile create
(bare create should be blank-slate)
Also: sanitize assistant_peer_id via _sanitize_id()
* fix(tests): add module cleanup fixture to test_cli_provider_resolution
test_cli_provider_resolution._import_cli() wipes tools.*, cli, and
run_agent from sys.modules to force fresh imports, but had no cleanup.
This poisoned all subsequent tests on the same xdist worker — mocks
targeting tools.file_tools, tools.send_message_tool, etc. patched the
NEW module object while already-imported functions still referenced
the OLD one. Caused ~25 cascade failures: send_message KeyError,
process_registry FileNotFoundError, file_read_guards timeouts,
read_loop_detection file-not-found, mcp_oauth None port, and
provider_parity/codex_execution stale tool lists.
Fix: autouse fixture saves all affected modules before each test and
restores them after, matching the pattern in
test_managed_browserbase_and_modal.py.
OpenCode Zen and Go are mixed-API-surface providers — different models
behind them use different API surfaces (GPT on Zen uses codex_responses,
Claude on Zen uses anthropic_messages, MiniMax on Go uses
anthropic_messages, GLM/Kimi on Go use chat_completions).
Changes:
- Add normalize_opencode_model_id() and opencode_model_api_mode() to
models.py for model ID normalization and API surface routing
- Add _provider_supports_explicit_api_mode() to runtime_provider.py
to prevent stale api_mode from leaking across provider switches
- Wire opencode routing into all three api_mode resolution paths:
pool entry, api_key provider, and explicit runtime
- Add api_mode field to ModelSwitchResult for propagation through the
switch pipeline
- Consolidate _PROVIDER_MODELS from main.py into models.py (single
source of truth, eliminates duplicate dict)
- Add opencode normalization to setup wizard and model picker flows
- Add opencode block to _normalize_model_for_provider in CLI
- Add opencode-zen/go fallback model lists to setup.py
Tests: 160 targeted tests pass (26 new tests covering normalization,
api_mode routing per provider/model, persistence, and setup wizard
normalization).
Based on PR #3017 by SaM13997.
Co-authored-by: SaM13997 <139419381+SaM13997@users.noreply.github.com>
hermes update only cleared .update_check for the active HERMES_HOME,
leaving other profiles showing stale 'N commits behind' in their banner.
Now _invalidate_update_cache() iterates over ~/.hermes/ (default) plus
every directory under ~/.hermes/profiles/ to clear all caches. The git
repo is shared across profiles so a single update brings them all current.
Reported by SteveSkedasticity on Discord.
The original PR excluded auth.json from _DEFAULT_EXPORT_EXCLUDE_ROOT and
filtered both auth.json and .env from named profile exports, but missed
adding .env to the default profile exclusion set. Default exports would
still leak .env containing API keys.
Added .env to _DEFAULT_EXPORT_EXCLUDE_ROOT, added test coverage, and
updated the existing test that incorrectly asserted .env presence.
- stderr handler now uses RedactingFormatter to match file handlers
- restart path uses verbose=0 (int) instead of verbose=False (bool)
- test mock updated with new run_gateway(verbose, quiet, replace) signature
When `sudo hermes gateway install --system --run-as-user <user>` generates
the systemd unit, get_hermes_home() resolves to /root/.hermes because
Path.home() returns root's home under sudo. The unit correctly sets
HOME= and User= via _system_service_identity(), but HERMES_HOME was
computed independently and pointed to root's config directory.
Add _hermes_home_for_target_user() which remaps the current HERMES_HOME
to the equivalent path under the target user's home. This handles:
- Default ~/.hermes → target user's ~/.hermes
- Profiles (e.g. ~/.hermes/profiles/coder) → preserves relative structure
- Custom paths (e.g. /opt/hermes) → kept as-is
Supersedes #3861 which only handled the default case and left profiles
broken (also flagged by Copilot review).
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
- Add _DEFAULT_EXPORT_EXCLUDE_ROOT constant with 25+ entries to exclude
from default profile exports: repo checkout (hermes-agent), worktrees,
databases (state.db), caches, runtime state, logs, binaries
- Add _default_export_ignore() with root-level and universal exclusions
(__pycache__, *.sock, *.tmp at any depth)
- Remove redundant shutil/tempfile imports from contributor's if-block
- Block import_profile() from accepting 'default' as target name with
clear guidance to use --name
- Add 7 tests covering: archive creation, inclusion of profile data,
exclusion of infrastructure, nested __pycache__ exclusion, import
rejection without --name, import rejection with --name default,
full export-import roundtrip with a different name
Addresses review feedback on PR #4370.
Fixes a zip-slip path traversal vulnerability in hermes profile import.
shutil.unpack_archive() on untrusted tar members allows entries like
../../escape.txt to write files outside ~/.hermes/profiles/.
- Add _normalize_profile_archive_parts() to reject absolute paths
(POSIX and Windows), traversal (..), empty paths, backslash tricks
- Add _safe_extract_profile_archive() for manual per-member extraction
that only allows regular files and directories (rejects symlinks)
- Replace shutil.unpack_archive() with the safe extraction path
- Add regression tests for traversal and absolute-path attacks
Co-authored-by: Gutslabs <gutslabsxyz@gmail.com>
`hermes config set KEY ""` and `hermes config set KEY 0` were rejected
because the guard used `not value` which is truthy for empty strings,
zero, and False. Changed to `value is None` so only truly missing
arguments are rejected.
Closes#4277
Co-Authored-By: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
* feat(auth): add same-provider credential pools and rotation UX
Add same-provider credential pooling so Hermes can rotate across
multiple credentials for a single provider, recover from exhausted
credentials without jumping providers immediately, and configure
that behavior directly in hermes setup.
- agent/credential_pool.py: persisted per-provider credential pools
- hermes auth add/list/remove/reset CLI commands
- 429/402/401 recovery with pool rotation in run_agent.py
- Setup wizard integration for pool strategy configuration
- Auto-seeding from env vars and existing OAuth state
Co-authored-by: kshitijk4poor <82637225+kshitijk4poor@users.noreply.github.com>
Salvaged from PR #2647
* fix(tests): prevent pool auto-seeding from host env in credential pool tests
Tests for non-pool Anthropic paths and auth remove were failing when
host env vars (ANTHROPIC_API_KEY) or file-backed OAuth credentials
were present. The pool auto-seeding picked these up, causing unexpected
pool entries in tests.
- Mock _select_pool_entry in auxiliary_client OAuth flag tests
- Clear Anthropic env vars and mock _seed_from_singletons in auth remove test
* feat(auth): add thread safety, least_used strategy, and request counting
- Add threading.Lock to CredentialPool for gateway thread safety
(concurrent requests from multiple gateway sessions could race on
pool state mutations without this)
- Add 'least_used' rotation strategy that selects the credential
with the lowest request_count, distributing load more evenly
- Add request_count field to PooledCredential for usage tracking
- Add mark_used() method to increment per-credential request counts
- Wrap select(), mark_exhausted_and_rotate(), and try_refresh_current()
with lock acquisition
- Add tests: least_used selection, mark_used counting, concurrent
thread safety (4 threads × 20 selects with no corruption)
* feat(auth): add interactive mode for bare 'hermes auth' command
When 'hermes auth' is called without a subcommand, it now launches an
interactive wizard that:
1. Shows full credential pool status across all providers
2. Offers a menu: add, remove, reset cooldowns, set strategy
3. For OAuth-capable providers (anthropic, nous, openai-codex), the
add flow explicitly asks 'API key or OAuth login?' — making it
clear that both auth types are supported for the same provider
4. Strategy picker shows all 4 options (fill_first, round_robin,
least_used, random) with the current selection marked
5. Remove flow shows entries with indices for easy selection
The subcommand paths (hermes auth add/list/remove/reset) still work
exactly as before for scripted/non-interactive use.
* fix(tests): update runtime_provider tests for config.yaml source of truth (#4165)
Tests were using OPENAI_BASE_URL env var which is no longer consulted
after #4165. Updated to use model config (provider, base_url, api_key)
which is the new single source of truth for custom endpoint URLs.
* feat(auth): support custom endpoint credential pools keyed by provider name
Custom OpenAI-compatible endpoints all share provider='custom', making
the provider-keyed pool useless. Now pools for custom endpoints are
keyed by 'custom:<normalized_name>' where the name comes from the
custom_providers config list (auto-generated from URL hostname).
- Pool key format: 'custom:together.ai', 'custom:local-(localhost:8080)'
- load_pool('custom:name') seeds from custom_providers api_key AND
model.api_key when base_url matches
- hermes auth add/list now shows custom endpoints alongside registry
providers
- _resolve_openrouter_runtime and _resolve_named_custom_runtime check
pool before falling back to single config key
- 6 new tests covering custom pool keying, seeding, and listing
* docs: add Excalidraw diagram of full credential pool flow
Comprehensive architecture diagram showing:
- Credential sources (env vars, auth.json OAuth, config.yaml, CLI)
- Pool storage and auto-seeding
- Runtime resolution paths (registry, custom, OpenRouter)
- Error recovery (429 retry-then-rotate, 402 immediate, 401 refresh)
- CLI management commands and strategy configuration
Open at: https://excalidraw.com/#json=2Ycqhqpi6f12E_3ITyiwh,c7u9jSt5BwrmiVzHGbm87g
* fix(tests): update setup wizard pool tests for unified select_provider_and_model flow
The setup wizard now delegates to select_provider_and_model() instead
of using its own prompt_choice-based provider picker. Tests needed:
- Mock select_provider_and_model as no-op (provider pre-written to config)
- Call _stub_tts BEFORE custom prompt_choice mock (it overwrites it)
- Pre-write model.provider to config so the pool step is reached
* docs: add comprehensive credential pool documentation
- New page: website/docs/user-guide/features/credential-pools.md
Full guide covering quick start, CLI commands, rotation strategies,
error recovery, custom endpoint pools, auto-discovery, thread safety,
architecture, and storage format.
- Updated fallback-providers.md to reference credential pools as the
first layer of resilience (same-provider rotation before cross-provider)
- Added hermes auth to CLI commands reference with usage examples
- Added credential_pool_strategies to configuration guide
* chore: remove excalidraw diagram from repo (external link only)
* refactor: simplify credential pool code — extract helpers, collapse extras, dedup patterns
- _load_config_safe(): replace 4 identical try/except/import blocks
- _iter_custom_providers(): shared generator for custom provider iteration
- PooledCredential.extra dict: collapse 11 round-trip-only fields
(token_type, scope, client_id, portal_base_url, obtained_at,
expires_in, agent_key_id, agent_key_expires_in, agent_key_reused,
agent_key_obtained_at, tls) into a single extra dict with
__getattr__ for backward-compatible access
- _available_entries(): shared exhaustion-check between select and peek
- Dedup anthropic OAuth seeding (hermes_pkce + claude_code identical)
- SimpleNamespace replaces class _Args boilerplate in auth_commands
- _try_resolve_from_custom_pool(): shared pool-check in runtime_provider
Net -17 lines. All 383 targeted tests pass.
---------
Co-authored-by: kshitijk4poor <82637225+kshitijk4poor@users.noreply.github.com>
Telegram Bot API requires command names to be 1-32 characters. Plugin
and skill names that exceed this limit now get truncated. If truncation
creates a collision (with core commands, other plugins, or other skills),
the name is shortened to 31 chars and a digit 0-9 is appended.
Adds _clamp_telegram_names() helper used for both plugin and skill
entries in telegram_menu_commands(). Core CommandDef commands are tracked
as reserved names so truncated plugin/skill names never shadow them.
Addresses the fix from PR #4191 (sroecker) with collision-safe truncation.
Tests: 9 new tests covering truncation, digit suffixes, exhaustion, dedup.
setup_model_provider() had 800+ lines of duplicated provider handling
that reimplemented the same credential prompting, OAuth flows, and model
selection that hermes model already provides via the _model_flow_*
functions. Every new provider had to be added in both places, and the
two implementations diverged in config persistence (setup.py did raw
YAML writes, _set_model_provider, and _update_config_for_provider
depending on the provider — main.py used its own load/save cycle).
This caused the #4172 bug: _model_flow_custom saved config to disk but
the wizard's final save_config(config) overwrote it with stale values.
Fix: extract the core of cmd_model() into select_provider_and_model()
and have setup_model_provider() call it. After the call, re-sync the
wizard's config dict from disk. Deletes ~800 lines of duplicated
provider handling from setup.py.
Also fixes cmd_model() double-AuthError crash on fresh installs with
no API keys configured.
_model_flow_custom() saved model.provider and model.base_url to disk
via its own load_config/save_config cycle, but never updated the
setup wizard's in-memory config dict. The wizard's final
save_config(config) then overwrote the custom settings with the
stale default string model value.
Fix: after saving to disk, also mutate the caller's config dict so
the wizard's final save preserves model.provider='custom' and the
base_url. Both the model_name and no-model_name branches are
covered.
Added regression tests that simulate the full wizard flow including
the final save_config(config) call — the step that was previously
untested.
OPENAI_BASE_URL was written to .env AND config.yaml, creating a dual-source
confusion. Users (especially Docker) would see the URL in .env and assume
that's where all config lives, then wonder why LLM_MODEL in .env didn't work.
Changes:
- Remove all 27 save_env_value("OPENAI_BASE_URL", ...) calls across main.py,
setup.py, and tools_config.py
- Remove OPENAI_BASE_URL env var reading from runtime_provider.py, cli.py,
models.py, and gateway/run.py
- Remove LLM_MODEL/HERMES_MODEL env var reading from gateway/run.py and
auxiliary_client.py — config.yaml model.default is authoritative
- Vision base URL now saved to config.yaml auxiliary.vision.base_url
(both setup wizard and tools_config paths)
- Tests updated to set config values instead of env vars
Convention enforced: .env is for SECRETS only (API keys). All other
configuration (model names, base URLs, provider selection) lives
exclusively in config.yaml.
Salvaged from PR #4024 by @Sertug17. Fixes#4017.
- Replace systemd-run --user --scope with setsid for portable session detach
- Add system-level service detection to cmd_update gateway restart
- Falls back to start_new_session=True on systems without setsid (macOS, minimal containers)
After migrating from OpenClaw, leftover workspace directories contain
state files (todo.json, sessions, logs) that confuse the agent — it
discovers them and reads/writes to stale locations instead of the
Hermes state directory, causing issues like cron jobs reading a
different todo list than interactive sessions.
Changes:
- hermes claw migrate now offers to archive the source directory after
successful migration (rename to .pre-migration, not delete)
- New `hermes claw cleanup` subcommand for users who already migrated
and need to archive leftover OpenClaw directories
- Migration notes updated with explicit cleanup guidance
- 42 tests covering all new functionality
Reported by SteveSkedasticity — multiple todo.json files across
~/.hermes/, ~/.openclaw/workspace/, and ~/.openclaw/workspace-assistant/
caused cron jobs to read from wrong locations.
Add timeout parameters to 4 subprocess.run() calls that could hang
indefinitely if the child process blocks (e.g., unresponsive docker
daemon, systemctl waiting for D-Bus):
- doctor.py: docker info (timeout=10), ssh check (timeout=15)
- status.py: systemctl is-active (timeout=5), launchctl list (timeout=5)
Each call site now catches subprocess.TimeoutExpired and treats it as
a failure, consistent with how non-zero return codes are already handled.
Add AST-based regression test that verifies every subprocess.run() call
in CLI modules specifies a timeout keyword argument.
Co-authored-by: dieutx <dangtc94@gmail.com>
The ./hermes convenience script still used the legacy Fire-based
cli.main wrapper, which doesn't support subcommands (gateway, cron,
doctor, etc.). The installed 'hermes' command already uses
hermes_cli.main:main (argparse) — this aligns the launcher.
Salvaged from PR #2009 by gito369.
test_hooks.py (7 failures): Built-in boot-md hook was always loaded
by _register_builtin_hooks(), adding +1 to every expected hook count.
Mock out built-in registration in TestDiscoverAndLoad so tests isolate
user-hook discovery logic.
test_tool_token_estimation.py (2 failures): tiktoken is not in
core/[all] dependencies. The estimation function gracefully returns {}
when tiktoken is missing, but tests expected non-empty results. Added
skipif markers for tests that need tiktoken.
test_plugins_cmd.py (1 failure): bare 'hermes plugins' now dispatches
to cmd_toggle() (interactive curses UI) instead of cmd_list(). Updated
test to match the new behavior.
* feat: show estimated tool token context in hermes tools checklist
Adds a live token estimate indicator to the bottom of the interactive
tool configuration checklist (hermes tools / hermes setup). As users
toggle toolsets on/off, the total estimated context cost updates in
real time.
Implementation:
- tools/registry.py: Add get_schema() for check_fn-free schema access
- hermes_cli/curses_ui.py: Add optional status_fn callback to
curses_checklist — renders at bottom-right of terminal, stays fixed
while items scroll
- hermes_cli/tools_config.py: Add _estimate_tool_tokens() using
tiktoken (cl100k_base, already installed) to count tokens in the
JSON-serialised OpenAI-format tool schemas. Results are cached
per-process. The status function deduplicates overlapping tools
(e.g. browser includes web_search) for accurate totals.
- 12 new tests covering estimation, caching, graceful degradation
when tiktoken is unavailable, status_fn wiring, deduplication,
and the numbered fallback display
* fix: use effective toolsets (includes plugins) for token estimation index mapping
The status_fn closure built ts_keys from CONFIGURABLE_TOOLSETS but the
checklist uses _get_effective_configurable_toolsets() which appends plugin
toolsets. With plugins present, the indices would mismatch, causing
IndexError when selecting a plugin toolset.
When the plist is deleted (manual cleanup, failed upgrade),
hermes gateway start now regenerates it automatically instead of
failing. Also simplifies the returncode==3 error path since the
plist is guaranteed to exist at that point.
Co-authored-by: Bartok9 <Bartok9@users.noreply.github.com>
