* docs: clarify WhatsApp allowlist behavior and document WHATSAPP_ALLOW_ALL_USERS
- Add WHATSAPP_ALLOW_ALL_USERS and WHATSAPP_DEBUG to env vars reference
- Warn that * is not a wildcard and silently blocks all messages
- Show WHATSAPP_ALLOWED_USERS as optional, not required
- Update troubleshooting with the * trap and debug mode tip
- Fix Security section to mention the allow-all alternative
Prompted by a user report in Discord where WHATSAPP_ALLOWED_USERS=*
caused all incoming messages to be silently dropped at the bridge level.
* feat: support * wildcard in platform allowlists
Follow the precedent set by SIGNAL_GROUP_ALLOWED_USERS which already
supports * as an allow-all wildcard.
Bridge (allowlist.js): matchesAllowedUser() now checks for * in the
allowedUsers set before iterating sender aliases.
Gateway (run.py): _is_authorized() checks for * in allowed_ids after
parsing the allowlist. This is generic — works for all platforms, not
just WhatsApp.
Updated docs to document * as a supported value instead of warning
against it. Added WHATSAPP_ALLOW_ALL_USERS and WHATSAPP_DEBUG to
the env vars reference.
Tests: JS allowlist test + 2 Python gateway tests (WhatsApp + Telegram
to verify cross-platform behavior).
* feat(auth): add same-provider credential pools and rotation UX
Add same-provider credential pooling so Hermes can rotate across
multiple credentials for a single provider, recover from exhausted
credentials without jumping providers immediately, and configure
that behavior directly in hermes setup.
- agent/credential_pool.py: persisted per-provider credential pools
- hermes auth add/list/remove/reset CLI commands
- 429/402/401 recovery with pool rotation in run_agent.py
- Setup wizard integration for pool strategy configuration
- Auto-seeding from env vars and existing OAuth state
Co-authored-by: kshitijk4poor <82637225+kshitijk4poor@users.noreply.github.com>
Salvaged from PR #2647
* fix(tests): prevent pool auto-seeding from host env in credential pool tests
Tests for non-pool Anthropic paths and auth remove were failing when
host env vars (ANTHROPIC_API_KEY) or file-backed OAuth credentials
were present. The pool auto-seeding picked these up, causing unexpected
pool entries in tests.
- Mock _select_pool_entry in auxiliary_client OAuth flag tests
- Clear Anthropic env vars and mock _seed_from_singletons in auth remove test
* feat(auth): add thread safety, least_used strategy, and request counting
- Add threading.Lock to CredentialPool for gateway thread safety
(concurrent requests from multiple gateway sessions could race on
pool state mutations without this)
- Add 'least_used' rotation strategy that selects the credential
with the lowest request_count, distributing load more evenly
- Add request_count field to PooledCredential for usage tracking
- Add mark_used() method to increment per-credential request counts
- Wrap select(), mark_exhausted_and_rotate(), and try_refresh_current()
with lock acquisition
- Add tests: least_used selection, mark_used counting, concurrent
thread safety (4 threads × 20 selects with no corruption)
* feat(auth): add interactive mode for bare 'hermes auth' command
When 'hermes auth' is called without a subcommand, it now launches an
interactive wizard that:
1. Shows full credential pool status across all providers
2. Offers a menu: add, remove, reset cooldowns, set strategy
3. For OAuth-capable providers (anthropic, nous, openai-codex), the
add flow explicitly asks 'API key or OAuth login?' — making it
clear that both auth types are supported for the same provider
4. Strategy picker shows all 4 options (fill_first, round_robin,
least_used, random) with the current selection marked
5. Remove flow shows entries with indices for easy selection
The subcommand paths (hermes auth add/list/remove/reset) still work
exactly as before for scripted/non-interactive use.
* fix(tests): update runtime_provider tests for config.yaml source of truth (#4165)
Tests were using OPENAI_BASE_URL env var which is no longer consulted
after #4165. Updated to use model config (provider, base_url, api_key)
which is the new single source of truth for custom endpoint URLs.
* feat(auth): support custom endpoint credential pools keyed by provider name
Custom OpenAI-compatible endpoints all share provider='custom', making
the provider-keyed pool useless. Now pools for custom endpoints are
keyed by 'custom:<normalized_name>' where the name comes from the
custom_providers config list (auto-generated from URL hostname).
- Pool key format: 'custom:together.ai', 'custom:local-(localhost:8080)'
- load_pool('custom:name') seeds from custom_providers api_key AND
model.api_key when base_url matches
- hermes auth add/list now shows custom endpoints alongside registry
providers
- _resolve_openrouter_runtime and _resolve_named_custom_runtime check
pool before falling back to single config key
- 6 new tests covering custom pool keying, seeding, and listing
* docs: add Excalidraw diagram of full credential pool flow
Comprehensive architecture diagram showing:
- Credential sources (env vars, auth.json OAuth, config.yaml, CLI)
- Pool storage and auto-seeding
- Runtime resolution paths (registry, custom, OpenRouter)
- Error recovery (429 retry-then-rotate, 402 immediate, 401 refresh)
- CLI management commands and strategy configuration
Open at: https://excalidraw.com/#json=2Ycqhqpi6f12E_3ITyiwh,c7u9jSt5BwrmiVzHGbm87g
* fix(tests): update setup wizard pool tests for unified select_provider_and_model flow
The setup wizard now delegates to select_provider_and_model() instead
of using its own prompt_choice-based provider picker. Tests needed:
- Mock select_provider_and_model as no-op (provider pre-written to config)
- Call _stub_tts BEFORE custom prompt_choice mock (it overwrites it)
- Pre-write model.provider to config so the pool step is reached
* docs: add comprehensive credential pool documentation
- New page: website/docs/user-guide/features/credential-pools.md
Full guide covering quick start, CLI commands, rotation strategies,
error recovery, custom endpoint pools, auto-discovery, thread safety,
architecture, and storage format.
- Updated fallback-providers.md to reference credential pools as the
first layer of resilience (same-provider rotation before cross-provider)
- Added hermes auth to CLI commands reference with usage examples
- Added credential_pool_strategies to configuration guide
* chore: remove excalidraw diagram from repo (external link only)
* refactor: simplify credential pool code — extract helpers, collapse extras, dedup patterns
- _load_config_safe(): replace 4 identical try/except/import blocks
- _iter_custom_providers(): shared generator for custom provider iteration
- PooledCredential.extra dict: collapse 11 round-trip-only fields
(token_type, scope, client_id, portal_base_url, obtained_at,
expires_in, agent_key_id, agent_key_expires_in, agent_key_reused,
agent_key_obtained_at, tls) into a single extra dict with
__getattr__ for backward-compatible access
- _available_entries(): shared exhaustion-check between select and peek
- Dedup anthropic OAuth seeding (hermes_pkce + claude_code identical)
- SimpleNamespace replaces class _Args boilerplate in auth_commands
- _try_resolve_from_custom_pool(): shared pool-check in runtime_provider
Net -17 lines. All 383 targeted tests pass.
---------
Co-authored-by: kshitijk4poor <82637225+kshitijk4poor@users.noreply.github.com>
OPENAI_BASE_URL was written to .env AND config.yaml, creating a dual-source
confusion. Users (especially Docker) would see the URL in .env and assume
that's where all config lives, then wonder why LLM_MODEL in .env didn't work.
Changes:
- Remove all 27 save_env_value("OPENAI_BASE_URL", ...) calls across main.py,
setup.py, and tools_config.py
- Remove OPENAI_BASE_URL env var reading from runtime_provider.py, cli.py,
models.py, and gateway/run.py
- Remove LLM_MODEL/HERMES_MODEL env var reading from gateway/run.py and
auxiliary_client.py — config.yaml model.default is authoritative
- Vision base URL now saved to config.yaml auxiliary.vision.base_url
(both setup wizard and tools_config paths)
- Tests updated to set config values instead of env vars
Convention enforced: .env is for SECRETS only (API keys). All other
configuration (model names, base URLs, provider selection) lives
exclusively in config.yaml.
Adds /btw <question> — ask a quick follow-up using the current
session context without interrupting the main conversation.
- Snapshots conversation history, answers with a no-tools agent
- Response is not persisted to session history or DB
- Runs in a background thread (CLI) / async task (gateway)
- Per-session guard prevents concurrent /btw in gateway
Implementation:
- model_tools.py: enabled_toolsets=[] now correctly means "no tools"
(was falsy, fell through to default "all tools")
- run_agent.py: persist_session=False gates _persist_session()
- cli.py: _handle_btw_command (background thread, Rich panel output)
- gateway/run.py: _handle_btw_command + _run_btw_task (async task)
- hermes_cli/commands.py: CommandDef for "btw"
Inspired by PR #3504 by areu01or00, reimplemented cleanly on current
main with the enabled_toolsets=[] fix and without the __btw_no_tools__
hack.
Salvaged from PR #4024 by @Sertug17. Fixes#4017.
- Replace systemd-run --user --scope with setsid for portable session detach
- Add system-level service detection to cmd_update gateway restart
- Falls back to start_new_session=True on systems without setsid (macOS, minimal containers)
Auto-compression still runs silently in the background with server-side
logging, but no longer sends messages to the user's chat about it.
Removed:
- 'Session is large... Auto-compressing' pre-compression notification
- 'Compressed: N → M messages' post-compression notification
- 'Session is still very large after compression' warning
- 'Auto-compression failed' warning
- Rate-limit tracking (only existed for these warnings)
When context compression fires during run_conversation() in the gateway,
the compressed messages were silently lost on the next turn. Two bugs:
1. Agent-side: _flush_messages_to_session_db() calculated
flush_from = max(len(conversation_history), _last_flushed_db_idx).
After compression, _last_flushed_db_idx was correctly reset to 0,
but conversation_history still had its original pre-compression
length (e.g. 200). Since compressed messages are shorter (~30),
messages[200:] was empty — nothing written to the new session's
SQLite.
Fix: Set conversation_history = None after each _compress_context()
call so start_idx = 0 and all compressed messages are flushed.
2. Gateway-side: history_offset was always len(agent_history) — the
original pre-compression length. After compression shortened the
message list, agent_messages[200:] was empty, causing the gateway
to fall back to writing only a user/assistant pair, losing the
compressed summary and tail context.
Fix: Detect session splits (agent.session_id != original) and set
history_offset = 0 so all compressed messages are written to JSONL.
Gateway hygiene pre-compression only checked model.context_length from
the top-level config, missing per-model context_length defined in
custom_providers entries. This caused premature compression for custom
provider users (e.g. 128K default instead of 200K configured).
The AIAgent's own compressor already reads custom_providers correctly
(run_agent.py lines 1171-1189). This adds the same fallback to the
gateway hygiene path, running after runtime provider resolution so
the base_url is available for matching.
* fix: rate-limit pairing rejection messages to prevent spam
When generate_code() returns None (rate limited or max pending), the
"Too many pairing requests" message was sent on every subsequent DM
with no cooldown. A user sending 30 messages would get 30 rejection
replies — reported as potential hack on WhatsApp.
Now check _is_rate_limited() before any pairing response, and record
rate limit after sending a rejection. Subsequent messages from the
same user are silently ignored until the rate limit window expires.
* test: add coverage for pairing response rate limiting
Follow-up to cherry-picked PR #4042 — adds tests verifying:
- Rate-limited users get silently ignored (no response sent)
- Rejection messages record rate limit for subsequent suppression
---------
Co-authored-by: 0xbyt4 <35742124+0xbyt4@users.noreply.github.com>
Adds /profile to COMMAND_REGISTRY (Info category) with handlers in
both CLI and gateway. Shows the active profile name and home directory.
Works on all platforms — CLI, Telegram, Discord, Slack, etc.
Detects profile by checking if HERMES_HOME is under ~/.hermes/profiles/.
Shows 'default' when running without a profile.
* feat: add /yolo slash command to toggle dangerous command approvals
Adds a /yolo command that toggles HERMES_YOLO_MODE at runtime, skipping
all dangerous command approval prompts for the current session. Works in
both CLI and gateway (Telegram, Discord, etc.).
- /yolo -> ON: all commands auto-approved, no confirmation prompts
- /yolo -> OFF: normal approval flow restored
The --yolo CLI flag already existed for launch-time opt-in. This adds
the ability to toggle mid-session without restarting.
Session-scoped — resets when the process ends. Uses the existing
HERMES_YOLO_MODE env var that check_all_command_guards() already
respects.
* fix: prevent context pressure warning spam (agent loop + gateway rate-limit)
Two complementary fixes for repeated context pressure warnings spamming
gateway users (Telegram, Discord, etc.):
1. Agent-level loop fix (run_agent.py):
After compression, only reset _context_pressure_warned if the
post-compression estimate is actually below the 85% warning level.
Previously the flag was unconditionally reset, causing the warning
to re-fire every loop iteration when compression couldn't reduce
below 85% of the threshold (e.g. very low threshold like 15%,
or system prompt alone exceeds the warning level).
2. Gateway-level rate-limit (gateway/run.py, salvaged from PR #3786):
Per-chat_id cooldown of 1 hour on compression warning messages.
Both warning paths ('still large after compression' and 'compression
failed') are gated. Defense-in-depth — even if the agent-level fix
has edge cases, users won't see more than one warning per hour.
Co-authored-by: dlkakbs <dlkakbs@users.noreply.github.com>
---------
Co-authored-by: dlkakbs <dlkakbs@users.noreply.github.com>
Adds a /yolo command that toggles HERMES_YOLO_MODE at runtime, skipping
all dangerous command approval prompts for the current session. Works in
both CLI and gateway (Telegram, Discord, etc.).
- /yolo -> ON: all commands auto-approved, no confirmation prompts
- /yolo -> OFF: normal approval flow restored
The --yolo CLI flag already existed for launch-time opt-in. This adds
the ability to toggle mid-session without restarting.
Session-scoped — resets when the process ends. Uses the existing
HERMES_YOLO_MODE env var that check_all_command_guards() already
respects.
* feat(gateway): skill-aware slash commands, paginated /commands, Telegram 100-cap
Map active skills to Telegram's slash command menu so users can
discover and invoke skills directly. Three changes:
1. Telegram menu now includes active skill commands alongside built-in
commands, capped at 100 entries (Telegram Bot API limit). Overflow
commands remain callable but hidden from the picker. Logged at
startup when cap is hit.
2. New /commands [page] gateway command for paginated browsing of all
commands + skills. /help now shows first 10 skill commands and
points to /commands for the full list.
3. When a user types a slash command that matches a disabled or
uninstalled skill, they get actionable guidance:
- Disabled: 'Enable it with: hermes skills config'
- Optional (not installed): 'Install with: hermes skills install official/<path>'
Built on ideas from PR #3921 by @kshitijk4poor.
* chore: move 21 niche skills to optional-skills
Move specialized/niche skills from built-in (skills/) to optional
(optional-skills/) to reduce the default skill count. Users can
install them with: hermes skills install official/<category>/<name>
Moved skills (21):
- mlops: accelerate, chroma, faiss, flash-attention,
hermes-atropos-environments, huggingface-tokenizers, instructor,
lambda-labs, llava, nemo-curator, pinecone, pytorch-lightning,
qdrant, saelens, simpo, slime, tensorrt-llm, torchtitan
- research: domain-intel, duckduckgo-search
- devops: inference-sh cli
Built-in skills: 96 → 75
Optional skills: 22 → 43
* fix: only include repo built-in skills in Telegram menu, not user-installed
User-installed skills (from hub or manually added) stay accessible via
/skills and by typing the command directly, but don't get registered
in the Telegram slash command picker. Only skills whose SKILL.md is
under the repo's skills/ directory are included in the menu.
This keeps the Telegram menu focused on the curated built-in set while
user-installed skills remain discoverable through /skills and /commands.
* feat(telegram): add webhook mode as alternative to polling
When TELEGRAM_WEBHOOK_URL is set, the adapter starts an HTTP webhook
server (via python-telegram-bot's start_webhook()) instead of long
polling. This enables cloud platforms like Fly.io and Railway to
auto-wake suspended machines on inbound HTTP traffic.
Polling remains the default — no behavior change unless the env var
is set.
Env vars:
TELEGRAM_WEBHOOK_URL Public HTTPS URL for Telegram to push to
TELEGRAM_WEBHOOK_PORT Local listen port (default 8443)
TELEGRAM_WEBHOOK_SECRET Secret token for update verification
Cherry-picked and adapted from PR #2022 by SHL0MS. Preserved all
current main enhancements (network error recovery, polling conflict
detection, DM topics setup).
Co-authored-by: SHL0MS <SHL0MS@users.noreply.github.com>
* fix: send_document call in background task delivery + vision download timeout
Two fixes salvaged from PR #2269 by amethystani:
1. gateway/run.py: adapter.send_file() → adapter.send_document()
send_file() doesn't exist on BasePlatformAdapter. Background task
media files were silently never delivered (AttributeError swallowed
by except Exception: pass).
2. tools/vision_tools.py: configurable image download timeout via
HERMES_VISION_DOWNLOAD_TIMEOUT env var (default 30s), plus guard
against raise None when max_retries=0.
The third fix in #2269 (opencode-go auth config) was already resolved
on main.
Co-authored-by: amethystani <amethystani@users.noreply.github.com>
---------
Co-authored-by: SHL0MS <SHL0MS@users.noreply.github.com>
Co-authored-by: amethystani <amethystani@users.noreply.github.com>
Adds WeCom as a gateway platform adapter using the AI Bot WebSocket
gateway for real-time bidirectional communication. No public endpoint
or new pip dependencies needed (uses existing aiohttp + httpx).
Features:
- WebSocket persistent connection with auto-reconnect (exponential backoff)
- DM and group messaging with configurable access policies
- Media upload/download with AES decryption for encrypted attachments
- Markdown rendering, quote context preservation
- Proactive + passive reply message modes
- Chunked media upload pipeline (512KB chunks)
Cherry-picked from PR #1898 by EvilRan with:
- Moved to current main (PR was 300 commits behind)
- Skipped base.py regressions (reply_to additions are good but belong
in a separate PR since they affect all platforms)
- Fixed test assertions to match current base class send() signature
(reply_to=None kwarg now explicit)
- All 16 integration points added surgically to current main
- No new pip dependencies (aiohttp + httpx already installed)
Fixes#1898
Co-authored-by: EvilRan <EvilRan@users.noreply.github.com>
Previously, when no API keys or provider credentials were found, Hermes
silently defaulted to OpenRouter + Claude Opus. This caused confusion
when users configured local servers (LM Studio, Ollama, etc.) with a
typo or unrecognized provider name — the system would silently route to
OpenRouter instead of telling them something was wrong.
Changes:
- resolve_provider() now raises AuthError when no credentials are found
instead of returning 'openrouter' as a silent fallback
- Added local server aliases: lmstudio, ollama, vllm, llamacpp → custom
- Removed hardcoded 'anthropic/claude-opus-4.6' fallback from gateway
and cron scheduler (they read from config.yaml instead)
- Updated cli-config.yaml.example with complete provider documentation
including all supported providers, aliases, and local server setup
WhatsApp DMs can arrive with LID sender IDs even when
WHATSAPP_ALLOWED_USERS is configured with phone numbers. The allowlist
check now reads bridge session mapping files (lid-mapping-*.json) to
resolve phone↔LID aliases, matching users regardless of which
identifier format the message uses.
Both the Python gateway (_is_user_authorized) and the Node bridge
(allowlist.js) now share the same mapping-file-based resolution logic.
Co-authored-by: Frederico Ribeiro <fr@tecompanytea.com>
Adds Feishu (ByteDance's enterprise messaging platform) as a gateway
platform adapter with full feature parity: WebSocket + webhook transports,
message batching, dedup, rate limiting, rich post/card content parsing,
media handling (images/audio/files/video), group @mention gating,
reaction routing, and interactive card button support.
Cherry-picked from PR #1793 by penwyp with:
- Moved to current main (PR was 458 commits behind)
- Fixed _send_with_retry shadowing BasePlatformAdapter method (renamed to
_feishu_send_with_retry to avoid signature mismatch crash)
- Fixed import structure: aiohttp/websockets imported independently of
lark_oapi so they remain available when SDK is missing
- Fixed get_hermes_home import (hermes_constants, not hermes_cli.config)
- Added skip decorators for tests requiring lark_oapi SDK
- All 16 integration points added surgically to current main
New dependency: lark-oapi>=1.5.3,<2 (optional, pip install hermes-agent[feishu])
Fixes#1788
Co-authored-by: penwyp <penwyp@users.noreply.github.com>
Tool call previews (paths, commands, queries) were hardcoded to truncate
at 35-40 chars across CLI spinners, completion lines, and gateway progress
messages. Users could not see full file paths in tool output.
New config option: display.tool_preview_length (default 0 = no limit).
Set a positive number to truncate at that length.
Changes:
- display.py: module-level _tool_preview_max_len with getter/setter;
build_tool_preview() and get_cute_tool_message() _trunc/_path respect it
- cli.py: reads config at startup, spinner widget respects config
- gateway/run.py: reads config per-message, progress callback respects config
- run_agent.py: removed redundant 30-char quiet-mode spinner truncation
- config.py: added display.tool_preview_length to DEFAULT_CONFIG
Reported by kriskaminski
Extends the single fallback_model mechanism into an ordered chain.
When the primary model fails, Hermes tries each fallback provider in
sequence until one succeeds or the chain is exhausted.
Config format (new):
fallback_providers:
- provider: openrouter
model: anthropic/claude-sonnet-4
- provider: openai
model: gpt-4o
Legacy single-dict fallback_model format still works unchanged.
Key fix vs original PR: the call sites in the retry loop now use
_fallback_index < len(_fallback_chain) instead of the old one-shot
_fallback_activated guard, so the chain actually advances through
all configured providers.
Changes:
- run_agent.py: _fallback_chain list + _fallback_index replaces
one-shot _fallback_model; _try_activate_fallback() advances
through chain; failed provider resolution skips to next entry;
call sites updated to allow chain advancement
- cli.py: reads fallback_providers with legacy fallback_model compat
- gateway/run.py: same
- hermes_cli/config.py: fallback_providers: [] in DEFAULT_CONFIG
- tests: 12 new chain tests + 6 existing test fixtures updated
Co-authored-by: uzaylisak <uzaylisak@users.noreply.github.com>
Replace all 5 plain open(config_path, 'w') calls in gateway command
handlers with atomic_yaml_write() from utils.py. This uses the
established tempfile + fsync + os.replace pattern to ensure config.yaml
is never left half-written if the process is killed mid-write.
Affected handlers: /personality (clear + set), /sethome, /reasoning
(_save_config_key helper), /verbose (tool_progress cycling).
Also fixes missing encoding='utf-8' on the /personality clear write.
Salvaged from PR #1211 by albatrosjj.
Self-hosted Honcho on localhost doesn't require authentication, but
both the activation gates and the SDK client required an API key.
Combined fix from three contributor PRs:
- Relax all 8 activation gates to accept (api_key OR base_url) as
valid credentials (#3482 by @cameronbergh)
- Use 'local' placeholder for the SDK client when base_url points to
localhost/127.0.0.1/::1 (#3570 by @ygd58)
Files changed: run_agent.py (2 gates), cli.py (1 gate),
gateway/run.py (1 gate), honcho_integration/cli.py (2 gates),
hermes_cli/doctor.py (2 gates), honcho_integration/client.py (SDK).
Co-authored-by: cameronbergh <cameronbergh@users.noreply.github.com>
Co-authored-by: ygd58 <ygd58@users.noreply.github.com>
Co-authored-by: devorun <devorun@users.noreply.github.com>
Users intuitively write model: { model: my-model } instead of
model: { default: my-model } and it silently falls back to the
hardcoded default. Now both spellings work across all three config
consumers: runtime_provider, CLI, and gateway.
Co-authored-by: ygd58 <ygd58@users.noreply.github.com>
Salvage of PR #3533 (binhnt92). Follow-up to #3480 — applies min(100, ...) to 5 remaining unclamped percentage display sites in context_compressor, cli /stats, gateway /stats, and memory tool. Defensive clamps now that the root cause (estimation heuristic) was already removed in #3480.
Co-Authored-By: binhnt92 <binhnt92@users.noreply.github.com>
When all messaging platforms exhaust retries and get queued for background
reconnection, exit with code 1 so systemd Restart=on-failure can restart
the process. Previously the gateway stayed alive as a zombie with no
connected platforms and exit code 0.
Salvaged from PR #3567 by kelsia14. Test updates added.
Co-authored-by: kelsia14 <kelsia14@users.noreply.github.com>
* fix(gateway): preserve full transcript on /compress instead of overwriting
The /compress command calls _compress_context() which correctly ends the
old session (preserving its full transcript in SQLite) and creates a new
session_id for the continuation. However, it then immediately called
rewrite_transcript() on the OLD session_id, overwriting the preserved
transcript with the compressed version — destroying searchable history.
Auto-compression (triggered by context pressure) does not have this bug
because the gateway already handles the session_id swap via the
agent.session_id != session_id check after _run_agent_sync.
Fix: after _compress_context creates the new session, write the compressed
messages into the NEW session_id and update the session store pointer.
The old session's full transcript stays intact and searchable via
session_search.
Before: /compress destroys original messages, session_search can't find
details from compressed portions.
After: /compress behaves like /new for history — full transcript preserved,
compressed context for the live session.
* fix(gateway): preserve transcript on /compress and hygiene compression
Apply session_id swap after _compress_context in both /compress handler
and hygiene pre-compression. _compress_context creates a new session
(ending the old one), but both paths were calling rewrite_transcript on
the OLD session_id — overwriting the preserved transcript and destroying
searchable history.
Now follows the same pattern as the auto-compression handler (lines
5415-5423): detect the new session_id, update the session store entry,
and write compressed messages to the new session.
Also fix FakeCompressAgent test mock to include session_id attribute
and simulate the session_id change that real _compress_context performs.
Co-authored-by: MacroAnarchy <MacroAnarchy@users.noreply.github.com>
---------
Co-authored-by: MacroAnarchy <MacroAnarchy@users.noreply.github.com>
When a new session starts in the gateway (via /new, /reset, or
auto-reset), send the user a summary of the detected configuration:
✨ Session reset! Starting fresh.
◆ Model: qwen3.5:27b-q4_K_M
◆ Provider: custom
◆ Context: 8K tokens (config)
◆ Endpoint: http://localhost:11434/v1
This makes misconfigured context length immediately visible — a user
running a local 8K model that falls to the 128K default will see:
◆ Context: 128K tokens (default — set model.context_length in config to override)
Instead of silently getting no compression and degrading responses.
- _format_session_info() resolves model, provider, context length,
and endpoint from config + runtime, matching the hygiene code's
resolution chain
- Local/custom endpoints shown; cloud endpoints hidden (not useful)
- Context source annotated: config, detected, or default with hint
- Appended to /new and /reset responses, and auto-reset notifications
- 9 tests covering all formatting paths and failure resilience
Addresses the user-facing side of #2708 — instead of trying to fix
every edge case in context detection, surface the values so users
can immediately see when something is wrong.
The startup warning 'No user allowlists configured' only checked
GATEWAY_ALLOW_ALL_USERS and per-platform _ALLOWED_USERS vars. It
missed SIGNAL_GROUP_ALLOWED_USERS and per-platform _ALLOW_ALL_USERS
vars (e.g. TELEGRAM_ALLOW_ALL_USERS), causing a false warning even
when users had these configured. The actual auth check in
_is_user_authorized already recognized these vars.
Cherry-picked from PR #3202 by binhnt92.
Co-authored-by: binhnt92 <binhnt.ht.92@gmail.com>
YAML 1.1 parses bare `off` as boolean False, which is falsy in
Python's `or` chain and silently falls through to the 'all' default.
Users setting `display.tool_progress: off` in config.yaml saw no
effect — tool progress stayed on.
Normalise False → 'off' before the or chain in both affected paths:
- gateway/run.py _run_agent() tool progress reader
- cli.py HermesCLI.__init__() tool_progress_mode
Reported by @gibbsoft in #2859. Closes#2859.
* fix(gateway): silence flush agent terminal output
quiet_mode=True only suppresses AIAgent init messages.
Tool call output still leaks to the terminal through
_safe_print → _print_fn during session reset/expiry.
Since #2670 injected live memory state into the flush prompt,
the flush agent now reliably calls memory tools — making the
output leak noticeable for the first time.
Set _print_fn to a no-op so the background flush is fully silent.
* test(gateway): add test for flush agent terminal silence + fix dotenv mock
- Add TestFlushAgentSilenced: verifies _print_fn is set to a no-op on
the flush agent so tool output never leaks to the terminal
- Fix pre-existing test failures: replace patch('run_agent.AIAgent')
with sys.modules mock to avoid importing run_agent (requires openai)
- Add autouse _mock_dotenv fixture so all tests in this file run
without the dotenv package installed
* fix(display): route KawaiiSpinner output through print_fn to fully silence flush agent
The previous fix set tmp_agent._print_fn = no-op on the flush agent but
spinner output and quiet-mode cute messages bypassed _print_fn entirely:
- KawaiiSpinner captured sys.stdout at __init__ and wrote directly to it
- quiet-mode tool results used builtin print() instead of _safe_print()
Add optional print_fn parameter to KawaiiSpinner.__init__; _write routes
through it when set. Pass self._print_fn to all spinner construction sites
in run_agent.py and change the quiet-mode cute message print to _safe_print.
The existing gateway fix (tmp_agent._print_fn = lambda) now propagates
correctly through both paths.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix(gateway): silence hygiene and compression background agents
Two more background AIAgent instances in the gateway were created with
quiet_mode=True but without _print_fn = no-op, causing tool output to
leak to the terminal:
- _hyg_agent (in-turn hygiene memory agent)
- tmp_agent (_compress_context path)
Apply the same _print_fn no-op pattern used for the flush agent.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* chore(display): remove unused _last_flush_time from KawaiiSpinner
Attribute was set but never read; upstream already removed it.
Leftover from conflict resolution during rebase onto upstream/main.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Dilee <uzmpsk.dilekakbas@gmail.com>
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
The background memory/skill review (_spawn_background_review) runs
after the agent response when turn/iteration counters exceed their
thresholds. It saves memories and skills, then prints a summary like
'💾 Memory updated · User profile updated'. In CLI mode this goes to
the terminal via _safe_print. In gateway mode, _safe_print routes to
print() which goes to stdout — invisible to the user.
Add a background_review_callback attribute to AIAgent. When set, the
background review thread calls it with the summary string after saves
complete. The gateway wires this to adapter.send() via the same
run_coroutine_threadsafe bridge used by status_callback, delivering
the notification to the user's chat.
* feat: config-gated /verbose command for messaging gateway
Add gateway_config_gate field to CommandDef, allowing cli_only commands
to be conditionally available in the gateway based on a config value.
- CommandDef gains gateway_config_gate: str | None — a config dotpath
that, when truthy, overrides cli_only for gateway surfaces
- /verbose uses gateway_config_gate='display.tool_progress_command'
- Default is off (cli_only behavior preserved)
- When enabled, /verbose cycles tool_progress mode (off/new/all/verbose)
in the gateway, saving to config.yaml — same cycle as the CLI
- Gateway helpers (help, telegram menus, slack mapping) dynamically
check config to include/exclude config-gated commands
- GATEWAY_KNOWN_COMMANDS always includes config-gated commands so
the gateway recognizes them and can respond appropriately
- Handles YAML 1.1 bool coercion (bare 'off' parses as False)
- 8 new tests for the config gate mechanism + gateway handler
* docs: document gateway_config_gate and /verbose messaging support
- AGENTS.md: add gateway_config_gate to CommandDef fields
- slash-commands.md: note /verbose can be enabled for messaging, update Notes
- configuration.md: add tool_progress_command to display section + usage note
- cli.md: cross-link to config docs for messaging enablement
- messaging/index.md: show tool_progress_command in config snippet
- plugins.md: add gateway_config_gate to register_command parameter table
Asyncio tasks created with create_task() but never stored can be
garbage collected mid-execution. Add self._background_tasks set to
hold references, with add_done_callback cleanup. Tracks:
- /background command task
- session-reset memory flush task
- session-resume memory flush task
Cancel all pending tasks in stop().
Update test fixtures that construct GatewayRunner via object.__new__()
to include the new _background_tasks attribute.
Cherry-picked from PR #3167 by memosr. The original PR also deleted
the DM topic auto-skill loading code — that deletion was excluded
from this salvage as it removes a shipped feature (#2598).
Co-authored-by: memosr.eth <96793918+memosr@users.noreply.github.com>
Gateway sessions had their own inline toolset resolution that only read
platform_toolsets from config, which never includes MCP server names.
MCP tools were discovered and registered but invisible to the model.
- Replace duplicated gateway toolset resolution in _run_agent() and
_run_background_task() with calls to the shared _get_platform_tools()
- Extend _get_platform_tools() to include globally enabled MCP servers
at runtime (include_default_mcp_servers=True), while config-editing
flows use include_default_mcp_servers=False to avoid persisting
implicit MCP defaults into platform_toolsets
- Add homeassistant to PLATFORMS dict (was missing, caused KeyError)
- Fix CLI entry point to use _get_platform_tools() as well, so MCP
tools are visible in CLI mode too
- Remove redundant platform_key reassignment in _run_background_task
Co-authored-by: kshitijk4poor <kshitijk4poor@users.noreply.github.com>
Previously _agent_config_signature() used only the first 8 characters of
the API key, which causes false cache hits for JWT/OAuth tokens that share
a common prefix (e.g. 'eyJhbGci'). This led to cross-account cache
collisions when switching OAuth accounts in multi-user gateway deployments.
Replace the 8-char prefix with a SHA-256 hash of the full key so the
signature is unique per credential while keeping secrets out of the
cache key.
Salvaged from PR #3117 by EmpireOperating.
Co-authored-by: EmpireOperating <EmpireOperating@users.noreply.github.com>
Salvages PR #3005 by web3blind. Cherry-picked onto current main with functional skill binding and docs added.
- DM topic creation via createForumTopic (Bot API 9.4, Feb 2026)
- Config-driven topics with thread_id persistence across restarts
- Session isolation via existing build_session_key thread_id support
- auto_skill field on MessageEvent for topic-skill bindings
- Gateway auto-loads bound skill on new sessions (same as /skill commands)
- Docs: full Private Chat Topics section in Telegram messaging guide
- 20 tests (17 original + 3 for auto_skill)
Closes#2598
Co-authored-by: web3blind <web3blind@users.noreply.github.com>
Three categories of cleanup, all zero-behavioral-change:
1. F-strings without placeholders (154 fixes across 29 files)
- Converted f'...' to '...' where no {expression} was present
- Heaviest files: run_agent.py (24), cli.py (20), honcho_integration/cli.py (34)
2. Simplify defensive patterns in run_agent.py
- Added explicit self._is_anthropic_oauth = False in __init__ (before
the api_mode branch that conditionally sets it)
- Replaced 7x getattr(self, '_is_anthropic_oauth', False) with direct
self._is_anthropic_oauth (attribute always initialized now)
- Added _is_openrouter_url() and _is_anthropic_url() helper methods
- Replaced 3 inline 'openrouter' in self._base_url_lower checks
3. Remove dead code in small files
- hermes_cli/claw.py: removed unused 'total' computation
- tools/fuzzy_match.py: removed unused strip_indent() function and
pattern_stripped variable
Full test suite: 6184 passed, 0 failures
E2E PTY: banner clean, tool calls work, zero garbled ANSI
When an agent thread hangs (truly blocked, never checks _interrupt_requested),
/stop now force-cleans _running_agents to unlock the session immediately.
Two changes:
- Early /stop intercept in the running-agent guard: bypasses normal command
dispatch to force-interrupt and unlock the session. Follows the same pattern
as the existing /new intercept.
- Sentinel /stop: force-cleans the sentinel instead of returning 'nothing to
stop yet', so /stop during slow startup actually unlocks the session.
Follow-up improvements over original PR:
- Consolidated duplicate resolve_command imports into single early resolution
- Updated _handle_stop_command to also force-clean for consistency
- Removed 10-minute hard timeout on the executor (would kill legitimate
long-running agent tasks; the /stop force-clean handles recovery)
Cherry-picked from Mibayy's PR #2498.
Co-authored-by: Mibayy <Mibayy@users.noreply.github.com>
The /model command is removed from both the interactive CLI and
messenger gateway (Telegram/Discord/Slack/WhatsApp). Users can
still change models via 'hermes model' CLI subcommand or by
editing config.yaml directly.
Removed:
- CommandDef entry from COMMAND_REGISTRY
- CLI process_command() handler and model autocomplete logic
- Gateway _handle_model_command() and dispatch
- SlashCommandCompleter model_completer_provider parameter
- Two-stage Tab completion and ghost text for /model
- All /model-specific tests
Unaffected:
- /provider command (read-only, shows current model + providers)
- ACP adapter _cmd_model (separate system for VS Code/Zed/JetBrains)
- model_switch.py module (used by ACP)
- 'hermes model' CLI subcommand
Author: Teknium
Centralizes two widely-duplicated patterns into hermes_constants.py:
1. get_hermes_home() — Path resolution for ~/.hermes (HERMES_HOME env var)
- Was copy-pasted inline across 30+ files as:
Path(os.getenv("HERMES_HOME", Path.home() / ".hermes"))
- Now defined once in hermes_constants.py (zero-dependency module)
- hermes_cli/config.py re-exports it for backward compatibility
- Removed local wrapper functions in honcho_integration/client.py,
tools/website_policy.py, tools/tirith_security.py, hermes_cli/uninstall.py
2. parse_reasoning_effort() — Reasoning effort string validation
- Was copy-pasted in cli.py, gateway/run.py, cron/scheduler.py
- Same validation logic: check against (xhigh, high, medium, low, minimal, none)
- Now defined once in hermes_constants.py, called from all 3 locations
- Warning log for unknown values kept at call sites (context-specific)
31 files changed, net +31 lines (125 insertions, 94 deletions)
Full test suite: 6179 passed, 0 failed
feat: persist reasoning across gateway session turns (schema v6)
Tested against OpenAI Codex (direct), Anthropic (direct + OAI-compat), and OpenRouter → 6 backends. All reasoning field types (reasoning, reasoning_details, codex_reasoning_items) round-trip through the DB correctly.
Phase 4 of the /model command overhaul.
Both the CLI (cli.py) and gateway (gateway/run.py) /model handlers
had ~50 lines of duplicated core logic: parsing, provider detection,
credential resolution, and model validation. This extracts that
pipeline into hermes_cli/model_switch.py.
New module exports:
- ModelSwitchResult: dataclass with all fields both handlers need
- CustomAutoResult: dataclass for bare '/model custom' results
- switch_model(): core pipeline — parse → detect → resolve → validate
- switch_to_custom_provider(): resolve endpoint + auto-detect model
The shared functions are pure (no I/O side effects). Each caller
handles its own platform-specific concerns:
- CLI: sets self.model/provider/etc, calls save_config_value(), prints
- Gateway: writes config.yaml directly, sets env vars, returns markdown
Net result: -244 lines from handlers, +234 lines in shared module.
The handlers are now ~80 lines each (down from ~150+) and can't drift
apart on core logic.
* feat(model): persist base_url on /model switch, auto-detect for bare /model custom
Phase 2+3 of the /model command overhaul:
Phase 2 — Persist base_url on model switch:
- CLI: save model.base_url when switching to a non-OpenRouter endpoint;
clear it when switching away from custom to prevent stale URLs
leaking into the new provider's resolution
- Gateway: same logic using direct YAML write
Phase 3 — Better feedback and edge cases:
- Bare '/model custom' now auto-detects the model from the endpoint
using _auto_detect_local_model() and saves all three config values
(model, provider, base_url) atomically
- Shows endpoint URL in success messages when switching to/from
custom providers (both CLI and gateway)
- Clear error messages when no custom endpoint is configured
- Updated test assertions for the additional save_config_value call
Fixes#2562 (Phase 2+3)
* feat(model): support custom:name:model triple syntax for named custom providers
Phase 5 of the /model command overhaul.
Extends parse_model_input() to handle the triple syntax:
/model custom:local-server:qwen → provider='custom:local-server', model='qwen'
/model custom:my-model → provider='custom', model='my-model' (unchanged)
The 'custom:local-server' provider string is already supported by
_get_named_custom_provider() in runtime_provider.py, which matches
it against the custom_providers list in config.yaml. This just wires
the parsing so users can do it from the /model slash command.
Added 4 tests covering single, triple, whitespace, and empty model cases.
The gateway memory flush agent reviews old conversation history on session
reset/expiry and writes to memory. It had no awareness of memory changes
made after that conversation ended (by the live agent, cron jobs, or other
sessions), causing silent overwrites of newer entries.
Two fixes:
1. Skip memory flush entirely for cron sessions (session IDs starting with
'cron_'). Cron sessions are headless with no meaningful user conversation
to extract memories from.
2. Inject the current live memory state (MEMORY.md + USER.md) directly into
the flush prompt. The flush agent can now see what's already saved and
make informed decisions — only adding genuinely new information rather
than blindly overwriting entries that may have been updated since the
conversation ended.
Addresses the root cause identified in #2670: the flush agent was making
memory decisions blind to the current state of memory, causing stale
context to overwrite newer entries on gateway restarts and session resets.
Co-authored-by: devorun <devorun@users.noreply.github.com>
Co-authored-by: dlkakbs <dlkakbs@users.noreply.github.com>
* feat(config): support ${ENV_VAR} substitution in config.yaml
* fix: extend env var expansion to CLI and gateway config loaders
The original PR (#2680) only wired _expand_env_vars into load_config(),
which is used by 'hermes tools' and 'hermes setup'. The two primary
config paths were missed:
- load_cli_config() in cli.py (interactive CLI)
- Module-level _cfg in gateway/run.py (gateway — bridges api_keys to env vars)
Also:
- Remove redundant 'import re' (already imported at module level)
- Add missing blank lines between top-level functions (PEP 8)
- Add tests for load_cli_config() expansion
---------
Co-authored-by: teyrebaz33 <hakanerten02@hotmail.com>
