* fix: Anthropic OAuth compatibility — Claude Code identity fingerprinting
Anthropic routes OAuth/subscription requests based on Claude Code's
identity markers. Without them, requests get intermittent 500 errors
(~25% failure rate observed). This matches what pi-ai (clawdbot) and
OpenCode both implement for OAuth compatibility.
Changes (OAuth tokens only — API key users unaffected):
1. Headers: user-agent 'claude-cli/2.1.2 (external, cli)' + x-app 'cli'
2. System prompt: prepend 'You are Claude Code, Anthropic's official CLI'
3. System prompt sanitization: replace Hermes/Nous references
4. Tool names: prefix with 'mcp_' (Claude Code convention for non-native tools)
5. Tool name stripping: remove 'mcp_' prefix from response tool calls
Before: 9/12 OK, 1 hard fail, 4 needed retries (~25% error rate)
After: 16/16 OK, 0 failures, 0 retries (0% error rate)
* fix: auto-detect DBUS_SESSION_BUS_ADDRESS for systemctl --user on headless servers
On SSH sessions to headless servers, DBUS_SESSION_BUS_ADDRESS and
XDG_RUNTIME_DIR may not be set even when the user's systemd instance
is running via linger. This causes 'systemctl --user' to fail with
'Failed to connect to bus: No medium found', breaking gateway
restart/start/stop as a service and falling back to foreground mode.
Add _ensure_user_systemd_env() that detects the standard D-Bus socket
at /run/user/<UID>/bus and sets the env vars before any systemctl --user
call. Called from _systemctl_cmd() so all existing call sites benefit
automatically with zero changes.
Fixes: gateway restart falling back to foreground on headless servers
* fix: show linger guidance when gateway restart fails during update and gateway restart
When systemctl --user restart fails during 'hermes update' or
'hermes gateway restart', check linger status and tell the user
exactly what to run (sudo -S -p '' loginctl enable-linger) instead of
silently falling back to foreground mode.
Also applies _ensure_user_systemd_env() to the raw systemctl calls
in cmd_update so they work properly on SSH sessions where D-Bus
env vars are missing.
* feat: add optional smart model routing
Add a conservative cheap-vs-strong routing option that can send very short/simple turns to a cheaper model across providers while keeping the primary model for complex work. Wire it through CLI, gateway, and cron, and document the config.yaml workflow.
* fix(gateway): remove recursive ExecStop from systemd units, extend TimeoutStopSec to 60s
* fix(gateway): avoid recursive ExecStop in user systemd unit
* fix: extend ExecStop removal and TimeoutStopSec=60 to system unit
The cherry-picked PR #1448 fix only covered the user systemd unit.
The system unit had the same TimeoutStopSec=15 and could benefit
from the same 60s timeout for clean shutdown. Also adds a regression
test for the system unit.
---------
Co-authored-by: Ninja <ninja@local>
* feat(skills): add blender-mcp optional skill for 3D modeling
Control a running Blender instance from Hermes via socket connection
to the blender-mcp addon (port 9876). Supports creating 3D objects,
materials, animations, and running arbitrary bpy code.
Placed in optional-skills/ since it requires Blender 4.3+ desktop
with a third-party addon manually started each session.
* feat(acp): support slash commands in ACP adapter (#1532)
Adds /help, /model, /tools, /context, /reset, /compact, /version
to the ACP adapter (VS Code, Zed, JetBrains). Commands are handled
directly in the server without instantiating the TUI — each command
queries agent/session state and returns plain text.
Unrecognized /commands fall through to the LLM as normal messages.
/model uses detect_provider_for_model() for auto-detection when
switching models, matching the CLI and gateway behavior.
Fixes#1402
* fix(logging): improve error logging in session search tool (#1533)
* fix(gateway): restart on retryable startup failures (#1517)
* feat(email): add skip_attachments option via config.yaml
* feat(email): add skip_attachments option via config.yaml
Adds a config.yaml-driven option to skip email attachments in the
gateway email adapter. Useful for malware protection and bandwidth
savings.
Configure in config.yaml:
platforms:
email:
skip_attachments: true
Based on PR #1521 by @an420eth, changed from env var to config.yaml
(via PlatformConfig.extra) to match the project's config-first pattern.
* docs: document skip_attachments option for email adapter
* fix(telegram): retry on transient TLS failures during connect and send
Add exponential-backoff retry (3 attempts) around initialize() to
handle transient TLS resets during gateway startup. Also catches
TimedOut and OSError in addition to NetworkError.
Add exponential-backoff retry (3 attempts) around send_message() for
NetworkError during message delivery, wrapping the existing Markdown
fallback logic.
Both imports are guarded with try/except ImportError for test
environments where telegram is mocked.
Based on PR #1527 by cmd8. Closes#1526.
* feat: permissive block_anchor thresholds and unicode normalization (#1539)
Salvaged from PR #1528 by an420eth. Closes#517.
Improves _strategy_block_anchor in fuzzy_match.py:
- Add unicode normalization (smart quotes, em/en-dashes, ellipsis,
non-breaking spaces → ASCII) so LLM-produced unicode artifacts
don't break anchor line matching
- Lower thresholds: 0.10 for unique matches (was 0.70), 0.30 for
multiple candidates — if first/last lines match exactly, the
block is almost certainly correct
- Use original (non-normalized) content for offset calculation to
preserve correct character positions
Tested: 3 new scenarios fixed (em-dash anchors, non-breaking space
anchors, very-low-similarity unique matches), zero regressions on
all 9 existing fuzzy match tests.
Co-authored-by: an420eth <an420eth@users.noreply.github.com>
* feat(cli): add file path autocomplete in the input prompt (#1545)
When typing a path-like token (./ ../ ~/ / or containing /),
the CLI now shows filesystem completions in the dropdown menu.
Directories show a trailing slash and 'dir' label; files show
their size. Completions are case-insensitive and capped at 30
entries.
Triggered by tokens like:
edit ./src/ma → shows ./src/main.py, ./src/manifest.json, ...
check ~/doc → shows ~/docs/, ~/documents/, ...
read /etc/hos → shows /etc/hosts, /etc/hostname, ...
open tools/reg → shows tools/registry.py
Slash command autocomplete (/help, /model, etc.) is unaffected —
it still triggers when the input starts with /.
Inspired by OpenCode PR #145 (file path completion menu).
Implementation:
- hermes_cli/commands.py: _extract_path_word() detects path-like
tokens, _path_completions() yields filesystem Completions with
size labels, get_completions() routes to paths vs slash commands
- tests/hermes_cli/test_path_completion.py: 26 tests covering
path extraction, prefix filtering, directory markers, home
expansion, case-insensitivity, integration with slash commands
* feat(privacy): redact PII from LLM context when privacy.redact_pii is enabled
Add privacy.redact_pii config option (boolean, default false). When
enabled, the gateway redacts personally identifiable information from
the system prompt before sending it to the LLM provider:
- Phone numbers (user IDs on WhatsApp/Signal) → hashed to user_<sha256>
- User IDs → hashed to user_<sha256>
- Chat IDs → numeric portion hashed, platform prefix preserved
- Home channel IDs → hashed
- Names/usernames → NOT affected (user-chosen, publicly visible)
Hashes are deterministic (same user → same hash) so the model can
still distinguish users in group chats. Routing and delivery use
the original values internally — redaction only affects LLM context.
Inspired by OpenClaw PR #47959.
* fix(privacy): skip PII redaction on Discord/Slack (mentions need real IDs)
Discord uses <@user_id> for mentions and Slack uses <@U12345> — the LLM
needs the real ID to tag users. Redaction now only applies to WhatsApp,
Signal, and Telegram where IDs are pure routing metadata.
Add 4 platform-specific tests covering Discord, WhatsApp, Signal, Slack.
* feat: smart approvals + /stop command (inspired by OpenAI Codex)
* feat: smart approvals — LLM-based risk assessment for dangerous commands
Adds a 'smart' approval mode that uses the auxiliary LLM to assess
whether a flagged command is genuinely dangerous or a false positive,
auto-approving low-risk commands without prompting the user.
Inspired by OpenAI Codex's Smart Approvals guardian subagent
(openai/codex#13860).
Config (config.yaml):
approvals:
mode: manual # manual (default), smart, off
Modes:
- manual — current behavior, always prompt the user
- smart — aux LLM evaluates risk: APPROVE (auto-allow), DENY (block),
or ESCALATE (fall through to manual prompt)
- off — skip all approval prompts (equivalent to --yolo)
When smart mode auto-approves, the pattern gets session-level approval
so subsequent uses of the same pattern don't trigger another LLM call.
When it denies, the command is blocked without user prompt. When
uncertain, it escalates to the normal manual approval flow.
The LLM prompt is carefully scoped: it sees only the command text and
the flagged reason, assesses actual risk vs false positive, and returns
a single-word verdict.
* feat: make smart approval model configurable via config.yaml
Adds auxiliary.approval section to config.yaml with the same
provider/model/base_url/api_key pattern as other aux tasks (vision,
web_extract, compression, etc.).
Config:
auxiliary:
approval:
provider: auto
model: '' # fast/cheap model recommended
base_url: ''
api_key: ''
Bridged to env vars in both CLI and gateway paths so the aux client
picks them up automatically.
* feat: add /stop command to kill all background processes
Adds a /stop slash command that kills all running background processes
at once. Currently users have to process(list) then process(kill) for
each one individually.
Inspired by OpenAI Codex's separation of interrupt (Ctrl+C stops current
turn) from /stop (cleans up background processes). See openai/codex#14602.
Ctrl+C continues to only interrupt the active agent turn — background
dev servers, watchers, etc. are preserved. /stop is the explicit way
to clean them all up.
* feat: first-class plugin architecture + hide status bar cost by default (#1544)
The persistent status bar now shows context %, token counts, and
duration but NOT $ cost by default. Cost display is opt-in via:
display:
show_cost: true
in config.yaml, or: hermes config set display.show_cost true
The /usage command still shows full cost breakdown since the user
explicitly asked for it — this only affects the always-visible bar.
Status bar without cost:
⚕ claude-sonnet-4 │ 12K/200K │ 6% │ 15m
Status bar with show_cost: true:
⚕ claude-sonnet-4 │ 12K/200K │ 6% │ $0.06 │ 15m
* feat: improve memory prioritization + aggressive skill updates (inspired by OpenAI Codex)
* feat: improve memory prioritization — user preferences over procedural knowledge
Inspired by OpenAI Codex's memory prompt improvements (openai/codex#14493)
which focus memory writes on user preferences and recurring patterns
rather than procedural task details.
Key insight: 'Optimize for reducing future user steering — the most
valuable memory prevents the user from having to repeat themselves.'
Changes:
- MEMORY_GUIDANCE (prompt_builder.py): added prioritization hierarchy
and the core principle about reducing user steering
- MEMORY_SCHEMA (memory_tool.py): reordered WHEN TO SAVE list to put
corrections first, added explicit PRIORITY guidance
- Memory nudge (run_agent.py): now asks specifically about preferences,
corrections, and workflow patterns instead of generic 'anything'
- Memory flush (run_agent.py): now instructs to prioritize user
preferences and corrections over task-specific details
* feat: more aggressive skill creation and update prompting
Press harder on skill updates — the agent should proactively patch
skills when it encounters issues during use, not wait to be asked.
Changes:
- SKILLS_GUIDANCE: 'consider saving' → 'save'; added explicit instruction
to patch skills immediately when found outdated/wrong
- Skills header: added instruction to update loaded skills before finishing
if they had missing steps or wrong commands
- Skill nudge: more assertive ('save the approach' not 'consider saving'),
now also prompts for updating existing skills used in the task
- Skill nudge interval: lowered default from 15 to 10 iterations
- skill_manage schema: added 'patch it immediately' to update triggers
* feat: first-class plugin architecture (#1555)
Plugin system for extending Hermes with custom tools, hooks, and
integrations — no source code changes required.
Core system (hermes_cli/plugins.py):
- Plugin discovery from ~/.hermes/plugins/, .hermes/plugins/, and
pip entry_points (hermes_agent.plugins group)
- PluginContext with register_tool() and register_hook()
- 6 lifecycle hooks: pre/post tool_call, pre/post llm_call,
on_session_start/end
- Namespace package handling for relative imports in plugins
- Graceful error isolation — broken plugins never crash the agent
Integration (model_tools.py):
- Plugin discovery runs after built-in + MCP tools
- Plugin tools bypass toolset filter via get_plugin_tool_names()
- Pre/post tool call hooks fire in handle_function_call()
CLI:
- /plugins command shows loaded plugins, tool counts, status
- Added to COMMANDS dict for autocomplete
Docs:
- Getting started guide (build-a-hermes-plugin.md) — full tutorial
building a calculator plugin step by step
- Reference page (features/plugins.md) — quick overview + tables
- Covers: file structure, schemas, handlers, hooks, data files,
bundled skills, env var gating, pip distribution, common mistakes
Tests: 16 tests covering discovery, loading, hooks, tool visibility.
* fix: hermes update causes dual gateways on macOS (launchd)
Three bugs worked together to create the dual-gateway problem:
1. cmd_update only checked systemd for gateway restart, completely
ignoring launchd on macOS. After killing the PID it would print
'Restart it with: hermes gateway run' even when launchd was about
to auto-respawn the process.
2. launchd's KeepAlive.SuccessfulExit=false respawns the gateway
after SIGTERM (non-zero exit), so the user's manual restart
created a second instance.
3. The launchd plist lacked --replace (systemd had it), so the
respawned gateway didn't kill stale instances on startup.
Fixes:
- Add --replace to launchd ProgramArguments (matches systemd)
- Add launchd detection to cmd_update's auto-restart logic
- Print 'auto-restart via launchd' instead of manual restart hint
* fix: add launchd plist auto-refresh + explicit restart in cmd_update
Two integration issues with the initial fix:
1. Existing macOS users with old plist (no --replace) would never
get the fix until manual uninstall/reinstall. Added
refresh_launchd_plist_if_needed() — mirrors the existing
refresh_systemd_unit_if_needed(). Called from launchd_start(),
launchd_restart(), and cmd_update.
2. cmd_update relied on KeepAlive respawn after SIGTERM rather than
explicit launchctl stop/start. This caused races: launchd would
respawn the old process before the PID file was cleaned up.
Now does explicit stop+start (matching how systemd gets an
explicit systemctl restart), with plist refresh first so the
new --replace flag is picked up.
---------
Co-authored-by: Ninja <ninja@local>
Co-authored-by: alireza78a <alireza78a@users.noreply.github.com>
Co-authored-by: Oktay Aydin <113846926+aydnOktay@users.noreply.github.com>
Co-authored-by: JP Lew <polydegen@protonmail.com>
Co-authored-by: an420eth <an420eth@users.noreply.github.com>
* fix(gateway): avoid recursive ExecStop in user systemd unit
* fix: extend ExecStop removal and TimeoutStopSec=60 to system unit
The cherry-picked PR #1448 fix only covered the user systemd unit.
The system unit had the same TimeoutStopSec=15 and could benefit
from the same 60s timeout for clean shutdown. Also adds a regression
test for the system unit.
---------
Co-authored-by: Ninja <ninja@local>
Multiple Hermes installations on the same machine now get unique
systemd service names:
- Default ~/.hermes → hermes-gateway (backward compatible)
- Custom HERMES_HOME → hermes-gateway-<8-char-hash>
Changes:
- Add get_service_name() in hermes_cli/gateway.py that derives a
deterministic service name from HERMES_HOME via SHA256
- Replace all hardcoded 'hermes-gateway' systemd references with
get_service_name() across gateway.py, main.py, status.py, uninstall.py
- Add HERMES_HOME env var to both user and system systemd unit templates
so the gateway process uses the correct installation
- Update tests to use get_service_name() in assertions
Fixes#1005
Without linger, user-level systemd services stop when the SSH session
ends — even though systemctl --user status shows active (running).
Changes to systemd_install():
- Try loginctl enable-linger automatically (succeeds when the process
has the required privileges)
- If loginctl fails (no privileges), print a clear, copy-pasteable
warning with the exact command the user must run
New helper: _ensure_linger_enabled()
- Fast path: checks /var/lib/systemd/linger/<user> (no subprocess)
- Auto-enable: loginctl enable-linger <user>
- Fallback: actionable warning with sudo command + restart instructions
Tests: 4 new tests in TestEnsureLingerEnabled, 205 passed total
- store gateway PID metadata and validate the live process before trusting gateway.pid
- auto-refresh outdated systemd user units before start/restart so installs pick up --replace fixes
- sweep stray manual gateway processes after service stops
- add regression tests for PID validation and service drift recovery
* fix(gateway): surface missing linger in status and doctor
Warn when a systemd user gateway service has linger disabled so users can
spot the common 'gateway sleeps after logout' deployment issue from both
hermes doctor and hermes gateway status.
* fix(gateway): check linger status after install
After installing the systemd user service, report whether linger is
already enabled instead of always printing the generic hint. This makes
post-install guidance match the user's actual deployment state.
Users sometimes paste Discord IDs with prefixes like 'user:123456',
'<@123456>', or '<@!123456>' from Discord's UI or third-party tools.
This caused auth failures since the allowlist contained 'user:123' but
the actual user_id from messages was just '123'.
Fixes:
- Added _clean_discord_id() helper in discord.py to strip common prefixes
- Applied sanitization at runtime when parsing DISCORD_ALLOWED_USERS env var
- Applied sanitization in hermes setup and hermes gateway setup input flows
- Handles user:, <@>, and <@!> prefix formats
Allow users to interact with Hermes by sending and receiving emails.
Uses IMAP polling for incoming messages and SMTP for replies with
proper threading (In-Reply-To, References headers).
Integrates with all 14 gateway extension points: config, adapter
factory, authorization, send_message tool, cron delivery, toolsets,
prompt hints, channel directory, setup wizard, status display, and
env example.
65 tests covering config, parsing, dispatch, threading, IMAP fetch,
SMTP send, attachments, and all integration points.
The 'hermes gateway setup' instructions for Slack were missing:
- The 'Subscribe to Events' step entirely (message.im, message.channels,
app_mention, message.groups)
- Several required scopes (app_mentions:read, groups:history, users:read,
files:write)
- Warning about bot only working in DMs without message.channels
- Step to invite the bot to channels
The 'hermes setup' flow (setup.py) and the website docs (slack.md)
already had the correct information — only gateway.py was outdated.
Reported by JordanB on Slack.
Complete Signal adapter using signal-cli daemon HTTP API.
Based on PR #268 by ibhagwan, rebuilt on current main with bug fixes.
Architecture:
- SSE streaming for inbound messages with exponential backoff (2s→60s)
- JSON-RPC 2.0 for outbound (send, typing, attachments, contacts)
- Health monitor detects stale SSE connections (120s threshold)
- Phone number redaction in all logs and global redact.py
Features:
- DM and group message support with separate access policies
- DM policies: pairing (default), allowlist, open
- Group policies: disabled (default), allowlist, open
- Attachment download with magic-byte type detection
- Typing indicators (8s refresh interval)
- 100MB attachment size limit, 8000 char message limit
- E.164 phone + UUID allowlist support
Integration:
- Platform.SIGNAL enum in gateway/config.py
- Signal in _is_user_authorized() allowlist maps (gateway/run.py)
- Adapter factory in _create_adapter() (gateway/run.py)
- user_id_alt/chat_id_alt fields in SessionSource for UUIDs
- send_message tool support via httpx JSON-RPC (not aiohttp)
- Interactive setup wizard in 'hermes gateway setup'
- Connectivity testing during setup (pings /api/v1/check)
- signal-cli detection and install guidance
Bug fixes from PR #268:
- Timestamp reads from envelope_data (not outer wrapper)
- Uses httpx consistently (not aiohttp in send_message tool)
- SIGNAL_DEBUG scoped to signal logger (not root)
- extract_images regex NOT modified (preserves group numbering)
- pairing.py NOT modified (no cross-platform side effects)
- No dual authorization (adapter defers to run.py for user auth)
- Wildcard uses set membership ('*' in set, not list equality)
- .zip default for PK magic bytes (not .docx)
No new Python dependencies — uses httpx (already core).
External requirement: signal-cli daemon (user-installed).
Tests: 30 new tests covering config, init, helpers, session source,
phone redaction, authorization, and send_message integration.
Co-authored-by: ibhagwan <ibhagwan@users.noreply.github.com>
Updated the systemd unit generation to include the virtual environment and node modules in the PATH, improving the execution context for the hermes CLI. Additionally, added support for installing Playwright and its dependencies on Arch/Manjaro systems in the install script, ensuring a smoother setup process for browser tools.
When running under systemd, the gateway could enter restart loops in two
scenarios:
1. The previous gateway process hasn't fully exited when systemd starts
a new one, causing 'Gateway already running (PID ...)' → exit 1 →
restart → same error → infinite loop.
2. The interactive CLI exits immediately in non-TTY mode, and systemd
keeps restarting it.
Changes:
- Add --replace flag to 'hermes gateway run' that gracefully kills any
existing gateway instance (SIGTERM → wait 10s → SIGKILL) before
starting, preventing the PID-lock deadlock.
- Update the generated systemd unit template to use --replace by default,
add ExecStop for clean shutdown, set KillMode=mixed and
TimeoutStopSec=15 for proper process management.
- Existing behavior (without --replace) is unchanged: still prints the
error message and exits, now also mentioning the --replace option.
Fixes#576
Enhanced the gateway setup process by including step-by-step setup instructions for Telegram, Discord, and Slack. Updated help prompts for environment variables to reference these new instructions, improving user guidance during the configuration of messaging platforms. This change aims to streamline the onboarding experience for users setting up their bots.
Enhanced the gateway setup process by introducing an allowlist feature for user IDs, improving security by denying access by default. Updated prompts to guide users in configuring allowed users for Telegram, Discord, and Slack platforms, and refined messaging for handling unauthorized users. This change aims to enhance user experience and security during the setup process.
Updated the gateway setup function to provide clearer messaging regarding the installation status of the gateway service. Added prompts for installing the service as a background process on supported platforms (Linux and macOS) and clarified next steps for users. Improved user experience by offering options to start the service immediately or run it in the foreground.
Modified the _platform_status function in gateway.py to return uncolored plain-text status strings for platforms, ensuring compatibility with simple_term_menu items. Additionally, removed emoji characters from the status display in the gateway setup menu for improved readability.
Enhanced the hermes CLI gateway with a new 'setup' command to configure messaging platforms (Telegram, Discord, Slack, WhatsApp). This includes prompts for necessary environment variables and improved user experience for platform configuration. Updated documentation to reflect the new command.
- Add scripts/install.cmd batch wrapper for CMD users (delegates to install.ps1)
- Add _find_shell() in local.py: detects Git Bash on Windows via
HERMES_GIT_BASH_PATH env var, shutil.which, or common install paths
(same pattern as Claude Code's CLAUDE_CODE_GIT_BASH_PATH)
- Use _find_shell() in process_registry.py for background processes
- Fix hermes_cli/gateway.py: use wmic instead of ps aux on Windows,
skip SIGKILL (doesn't exist on Windows), fix venv path
(Scripts/python.exe vs bin/python)
- Update README with three install commands (Linux/macOS, PowerShell, CMD)
and Windows native documentation
Requires Git for Windows, which bundles bash.exe. The terminal tool
transparently uses Git Bash for shell commands regardless of whether
the user launched hermes from PowerShell or CMD.
- Removed legacy cron daemon functionality, integrating cron job execution directly into the gateway process for improved efficiency.
- Updated CLI commands to reflect changes, replacing `hermes cron daemon` with `hermes cron status` and enhancing documentation for cron job management.
- Clarified messaging in the README and other documentation regarding the gateway's role in managing cron jobs.
- Removed obsolete terminal_hecate tool and related configurations to simplify the codebase.
- Updated the README to include a new banner image and changed the title emoji from 🦋 to ⚕.
- Modified various CLI outputs and scripts to reflect the new branding, ensuring consistency in the use of the ⚕ emoji.
- Added a new banner image asset for enhanced visual appeal during installation and setup processes.
- Updated the start_gateway function to return a boolean indicating success or failure, allowing for better control over exit codes.
- Modified the main function to handle gateway startup failures, ensuring systemd can automatically restart on transient errors.
- Enhanced error handling in the hermes_cli gateway to exit with code 1 if the gateway fails to connect to any platform.
- Added new environment variables for Telegram and Discord bot configurations, including `TELEGRAM_ALLOWED_USERS` and `DISCORD_ALLOWED_USERS`, to restrict bot access to specific users.
- Updated documentation in AGENTS.md and README.md to include detailed setup instructions for the messaging gateway, emphasizing the importance of user allowlists for security.
- Improved the CLI setup wizard to prompt for allowed user IDs during configuration, enhancing user guidance and security awareness.
- Refined the gateway run script to support user authorization checks, ensuring only allowed users can interact with the bot.
- Updated CLI to load configuration from user-specific and project-specific YAML files, prioritizing user settings.
- Introduced a new command `/platforms` to display the status of connected messaging platforms (Telegram, Discord, WhatsApp).
- Implemented a gateway system for handling messaging interactions, including session management and delivery routing for cron job outputs.
- Added support for environment variable configuration and a dedicated gateway configuration file for advanced settings.
- Enhanced documentation in README.md and added a new messaging.md file to guide users on platform integrations and setup.
- Updated toolsets to include platform-specific capabilities for Telegram, Discord, and WhatsApp, ensuring secure and tailored interactions.
