* fix: force-close TCP sockets on client cleanup, detect and recover dead connections
When a provider drops connections mid-stream (e.g. OpenRouter outage),
httpx's graceful close leaves sockets in CLOSE-WAIT indefinitely. These
zombie connections accumulate and can prevent recovery without restarting.
Changes:
- _force_close_tcp_sockets: walks the httpx connection pool and issues
socket.shutdown(SHUT_RDWR) + close() to force TCP RST on every socket
when a client is closed, preventing CLOSE-WAIT accumulation
- _cleanup_dead_connections: probes the primary client's pool for dead
sockets (recv MSG_PEEK), rebuilds the client if any are found
- Pre-turn health check at the start of each run_conversation call that
auto-recovers with a user-facing status message
- Primary client rebuild after stale stream detection to purge pool
- User-facing messages on streaming connection failures:
"Connection to provider dropped — Reconnecting (attempt 2/3)"
"Connection failed after 3 attempts — try again in a moment"
Made-with: Cursor
* fix: pool entry missing base_url for openrouter, clean error messages
- _resolve_runtime_from_pool_entry: add OPENROUTER_BASE_URL fallback
when pool entry has no runtime_base_url (pool entries from auth.json
credential_pool often omit base_url)
- Replace Rich console.print for auth errors with plain print() to
prevent ANSI escape code mangling through prompt_toolkit's stdout patch
- Force-close TCP sockets on client cleanup to prevent CLOSE-WAIT
accumulation after provider outages
- Pre-turn dead connection detection with auto-recovery and user message
- Primary client rebuild after stale stream detection
- User-facing status messages on streaming connection failures/retries
Made-with: Cursor
* fix(gateway): persist memory flush state to prevent redundant re-flushes on restart
The _session_expiry_watcher tracked flushed sessions in an in-memory set
(_pre_flushed_sessions) that was lost on gateway restart. Expired sessions
remained in sessions.json and were re-discovered every restart, causing
redundant AIAgent runs that burned API credits and blocked the event loop.
Fix: Add a memory_flushed boolean field to SessionEntry, persisted in
sessions.json. The watcher sets it after a successful flush. On restart,
the flag survives and the watcher skips already-flushed sessions.
- Add memory_flushed field to SessionEntry with to_dict/from_dict support
- Old sessions.json entries without the field default to False (backward compat)
- Remove the ephemeral _pre_flushed_sessions set from SessionStore
- Update tests: save/load roundtrip, legacy entry compat, auto-reset behavior
Reuse a single SessionDB across requests by caching on self._session_db
with lazy initialization. Avoids creating a new SQLite connection per
request when X-Hermes-Session-Id is used. Updated tests to set
adapter._session_db directly instead of patching the constructor.
Allow callers to pass X-Hermes-Session-Id in request headers to continue
an existing conversation. When provided, history is loaded from SessionDB
instead of the request body, and the session_id is echoed in the response
header. Without the header, existing behavior is preserved (new uuid per
request).
This enables web UI clients to maintain thread continuity without modifying
any session state themselves — the same mechanism the gateway uses for IM
platforms (Telegram, Discord, etc.).
- stderr handler now uses RedactingFormatter to match file handlers
- restart path uses verbose=0 (int) instead of verbose=False (bool)
- test mock updated with new run_gateway(verbose, quiet, replace) signature
By default 'hermes gateway run' now prints WARNING+ to stderr so
connection errors and startup failures are visible in the terminal
without having to tail ~/.hermes/logs/gateway.log.
- gateway/run.py: start_gateway() accepts verbosity: Optional[int]=0.
When not None, attaches a StreamHandler to stderr with level mapped
from the count (0=WARNING, 1=INFO, 2+=DEBUG). Root logger level is
also lowered when DEBUG is requested so records are not swallowed.
- hermes_cli/gateway.py: run_gateway() gains verbose: int and
quiet: bool params. -q translates to verbosity=None (no stderr
handler). Wired through gateway_command().
- hermes_cli/main.py: -v changed from store_true to action=count so
-v/-vv/-vvv each increment the level. -q/--quiet added as a new flag.
Behaviour summary:
hermes gateway run -> WARNING+ on stderr (default)
hermes gateway run -q -> silent
hermes gateway run -v -> INFO+
hermes gateway run -vv -> DEBUG
When a dangerous command was blocked and the user approved it via /approve,
the command was executed but the agent loop had already exited — the agent
never received the command output and the task died silently.
Now _handle_approve_command sends immediate feedback to the user, then
creates a synthetic continuation message with the command output and feeds
it through _handle_message so the agent picks up where it left off.
- Send command result to chat immediately via adapter.send()
- Create synthetic MessageEvent with command + output as context
- Spawn asyncio task to re-invoke agent via _handle_message
- Return None (feedback already sent directly)
- Add test for agent re-invocation after approval
- Update existing approval tests for new return behavior
Three bugs prevented credential pool rotation from working when multiple
Codex OAuth tokens were configured:
1. credential_pool was dropped during smart model turn routing.
resolve_turn_route() constructed runtime dicts without it, so the
AIAgent was created without pool access. Fixed in smart_model_routing.py
(no-route and fallback paths), cli.py, and gateway/run.py.
2. Eager fallback fired before pool rotation on 429. The rate-limit
handler at line ~7180 switched to a fallback provider immediately,
before _recover_with_credential_pool got a chance to rotate to the
next credential. Now deferred when the pool still has credentials.
3. (Non-issue) Retry budget was reported as too small, but successful
pool rotations already skip retry_count increment — no change needed.
Reported by community member Schinsly who identified all three root
causes and verified the fix locally with multiple Codex accounts.
Telegram API returns HTTP 400 when sent whitespace-only or empty
text. Add a guard at the top of send() to silently succeed on
blank content instead of crashing.
Equivalent to OpenClaw #56620.
The delivery target parser uses split(':', 1) which only splits on the
first colon. For the documented format platform:chat_id:thread_id
(e.g. 'telegram:-1001234567890:17585'), thread_id gets munged into
chat_id and is never extracted.
Fix: split(':', 2) to correctly extract all three parts. Also fix
to_string() to include thread_id for proper round-tripping.
The downstream plumbing in _deliver_to_platform() already handles
thread_id correctly (line 292-293) — it just never received a value.
* docs: clarify WhatsApp allowlist behavior and document WHATSAPP_ALLOW_ALL_USERS
- Add WHATSAPP_ALLOW_ALL_USERS and WHATSAPP_DEBUG to env vars reference
- Warn that * is not a wildcard and silently blocks all messages
- Show WHATSAPP_ALLOWED_USERS as optional, not required
- Update troubleshooting with the * trap and debug mode tip
- Fix Security section to mention the allow-all alternative
Prompted by a user report in Discord where WHATSAPP_ALLOWED_USERS=*
caused all incoming messages to be silently dropped at the bridge level.
* feat: support * wildcard in platform allowlists
Follow the precedent set by SIGNAL_GROUP_ALLOWED_USERS which already
supports * as an allow-all wildcard.
Bridge (allowlist.js): matchesAllowedUser() now checks for * in the
allowedUsers set before iterating sender aliases.
Gateway (run.py): _is_authorized() checks for * in allowed_ids after
parsing the allowlist. This is generic — works for all platforms, not
just WhatsApp.
Updated docs to document * as a supported value instead of warning
against it. Added WHATSAPP_ALLOW_ALL_USERS and WHATSAPP_DEBUG to
the env vars reference.
Tests: JS allowlist test + 2 Python gateway tests (WhatsApp + Telegram
to verify cross-platform behavior).
* feat(auth): add same-provider credential pools and rotation UX
Add same-provider credential pooling so Hermes can rotate across
multiple credentials for a single provider, recover from exhausted
credentials without jumping providers immediately, and configure
that behavior directly in hermes setup.
- agent/credential_pool.py: persisted per-provider credential pools
- hermes auth add/list/remove/reset CLI commands
- 429/402/401 recovery with pool rotation in run_agent.py
- Setup wizard integration for pool strategy configuration
- Auto-seeding from env vars and existing OAuth state
Co-authored-by: kshitijk4poor <82637225+kshitijk4poor@users.noreply.github.com>
Salvaged from PR #2647
* fix(tests): prevent pool auto-seeding from host env in credential pool tests
Tests for non-pool Anthropic paths and auth remove were failing when
host env vars (ANTHROPIC_API_KEY) or file-backed OAuth credentials
were present. The pool auto-seeding picked these up, causing unexpected
pool entries in tests.
- Mock _select_pool_entry in auxiliary_client OAuth flag tests
- Clear Anthropic env vars and mock _seed_from_singletons in auth remove test
* feat(auth): add thread safety, least_used strategy, and request counting
- Add threading.Lock to CredentialPool for gateway thread safety
(concurrent requests from multiple gateway sessions could race on
pool state mutations without this)
- Add 'least_used' rotation strategy that selects the credential
with the lowest request_count, distributing load more evenly
- Add request_count field to PooledCredential for usage tracking
- Add mark_used() method to increment per-credential request counts
- Wrap select(), mark_exhausted_and_rotate(), and try_refresh_current()
with lock acquisition
- Add tests: least_used selection, mark_used counting, concurrent
thread safety (4 threads × 20 selects with no corruption)
* feat(auth): add interactive mode for bare 'hermes auth' command
When 'hermes auth' is called without a subcommand, it now launches an
interactive wizard that:
1. Shows full credential pool status across all providers
2. Offers a menu: add, remove, reset cooldowns, set strategy
3. For OAuth-capable providers (anthropic, nous, openai-codex), the
add flow explicitly asks 'API key or OAuth login?' — making it
clear that both auth types are supported for the same provider
4. Strategy picker shows all 4 options (fill_first, round_robin,
least_used, random) with the current selection marked
5. Remove flow shows entries with indices for easy selection
The subcommand paths (hermes auth add/list/remove/reset) still work
exactly as before for scripted/non-interactive use.
* fix(tests): update runtime_provider tests for config.yaml source of truth (#4165)
Tests were using OPENAI_BASE_URL env var which is no longer consulted
after #4165. Updated to use model config (provider, base_url, api_key)
which is the new single source of truth for custom endpoint URLs.
* feat(auth): support custom endpoint credential pools keyed by provider name
Custom OpenAI-compatible endpoints all share provider='custom', making
the provider-keyed pool useless. Now pools for custom endpoints are
keyed by 'custom:<normalized_name>' where the name comes from the
custom_providers config list (auto-generated from URL hostname).
- Pool key format: 'custom:together.ai', 'custom:local-(localhost:8080)'
- load_pool('custom:name') seeds from custom_providers api_key AND
model.api_key when base_url matches
- hermes auth add/list now shows custom endpoints alongside registry
providers
- _resolve_openrouter_runtime and _resolve_named_custom_runtime check
pool before falling back to single config key
- 6 new tests covering custom pool keying, seeding, and listing
* docs: add Excalidraw diagram of full credential pool flow
Comprehensive architecture diagram showing:
- Credential sources (env vars, auth.json OAuth, config.yaml, CLI)
- Pool storage and auto-seeding
- Runtime resolution paths (registry, custom, OpenRouter)
- Error recovery (429 retry-then-rotate, 402 immediate, 401 refresh)
- CLI management commands and strategy configuration
Open at: https://excalidraw.com/#json=2Ycqhqpi6f12E_3ITyiwh,c7u9jSt5BwrmiVzHGbm87g
* fix(tests): update setup wizard pool tests for unified select_provider_and_model flow
The setup wizard now delegates to select_provider_and_model() instead
of using its own prompt_choice-based provider picker. Tests needed:
- Mock select_provider_and_model as no-op (provider pre-written to config)
- Call _stub_tts BEFORE custom prompt_choice mock (it overwrites it)
- Pre-write model.provider to config so the pool step is reached
* docs: add comprehensive credential pool documentation
- New page: website/docs/user-guide/features/credential-pools.md
Full guide covering quick start, CLI commands, rotation strategies,
error recovery, custom endpoint pools, auto-discovery, thread safety,
architecture, and storage format.
- Updated fallback-providers.md to reference credential pools as the
first layer of resilience (same-provider rotation before cross-provider)
- Added hermes auth to CLI commands reference with usage examples
- Added credential_pool_strategies to configuration guide
* chore: remove excalidraw diagram from repo (external link only)
* refactor: simplify credential pool code — extract helpers, collapse extras, dedup patterns
- _load_config_safe(): replace 4 identical try/except/import blocks
- _iter_custom_providers(): shared generator for custom provider iteration
- PooledCredential.extra dict: collapse 11 round-trip-only fields
(token_type, scope, client_id, portal_base_url, obtained_at,
expires_in, agent_key_id, agent_key_expires_in, agent_key_reused,
agent_key_obtained_at, tls) into a single extra dict with
__getattr__ for backward-compatible access
- _available_entries(): shared exhaustion-check between select and peek
- Dedup anthropic OAuth seeding (hermes_pkce + claude_code identical)
- SimpleNamespace replaces class _Args boilerplate in auth_commands
- _try_resolve_from_custom_pool(): shared pool-check in runtime_provider
Net -17 lines. All 383 targeted tests pass.
---------
Co-authored-by: kshitijk4poor <82637225+kshitijk4poor@users.noreply.github.com>
Adds a 'reactions' key under the discord config section (default: true).
When set to false, the bot no longer adds 👀/✅/❌ reactions to messages
during processing. The config maps to DISCORD_REACTIONS env var following
the same pattern as require_mention and auto_thread.
Files changed:
- hermes_cli/config.py: Add reactions default to DEFAULT_CONFIG
- gateway/config.py: Map discord.reactions to DISCORD_REACTIONS env var
- gateway/platforms/discord.py: Gate on_processing_start/complete hooks
- tests/gateway/test_discord_reactions.py: 3 new tests for config gate
OPENAI_BASE_URL was written to .env AND config.yaml, creating a dual-source
confusion. Users (especially Docker) would see the URL in .env and assume
that's where all config lives, then wonder why LLM_MODEL in .env didn't work.
Changes:
- Remove all 27 save_env_value("OPENAI_BASE_URL", ...) calls across main.py,
setup.py, and tools_config.py
- Remove OPENAI_BASE_URL env var reading from runtime_provider.py, cli.py,
models.py, and gateway/run.py
- Remove LLM_MODEL/HERMES_MODEL env var reading from gateway/run.py and
auxiliary_client.py — config.yaml model.default is authoritative
- Vision base URL now saved to config.yaml auxiliary.vision.base_url
(both setup wizard and tools_config paths)
- Tests updated to set config values instead of env vars
Convention enforced: .env is for SECRETS only (API keys). All other
configuration (model names, base URLs, provider selection) lives
exclusively in config.yaml.
Adds /btw <question> — ask a quick follow-up using the current
session context without interrupting the main conversation.
- Snapshots conversation history, answers with a no-tools agent
- Response is not persisted to session history or DB
- Runs in a background thread (CLI) / async task (gateway)
- Per-session guard prevents concurrent /btw in gateway
Implementation:
- model_tools.py: enabled_toolsets=[] now correctly means "no tools"
(was falsy, fell through to default "all tools")
- run_agent.py: persist_session=False gates _persist_session()
- cli.py: _handle_btw_command (background thread, Rich panel output)
- gateway/run.py: _handle_btw_command + _run_btw_task (async task)
- hermes_cli/commands.py: CommandDef for "btw"
Inspired by PR #3504 by areu01or00, reimplemented cleanly on current
main with the enabled_toolsets=[] fix and without the __btw_no_tools__
hack.
Salvaged from PR #4024 by @Sertug17. Fixes#4017.
- Replace systemd-run --user --scope with setsid for portable session detach
- Add system-level service detection to cmd_update gateway restart
- Falls back to start_new_session=True on systems without setsid (macOS, minimal containers)
Auto-compression still runs silently in the background with server-side
logging, but no longer sends messages to the user's chat about it.
Removed:
- 'Session is large... Auto-compressing' pre-compression notification
- 'Compressed: N → M messages' post-compression notification
- 'Session is still very large after compression' warning
- 'Auto-compression failed' warning
- Rate-limit tracking (only existed for these warnings)
Wire the existing tool_progress_callback through the API server's
streaming handler so Open WebUI users see what tool is running.
Uses the existing 3-arg callback signature (name, preview, args)
that fires at tool start — no changes to run_agent.py needed.
Progress appears as inline markdown in the SSE content stream.
Inspired by PR #4032 by sroecker, reimplemented to avoid breaking
the callback signature used by CLI and gateway consumers.
When context compression fires during run_conversation() in the gateway,
the compressed messages were silently lost on the next turn. Two bugs:
1. Agent-side: _flush_messages_to_session_db() calculated
flush_from = max(len(conversation_history), _last_flushed_db_idx).
After compression, _last_flushed_db_idx was correctly reset to 0,
but conversation_history still had its original pre-compression
length (e.g. 200). Since compressed messages are shorter (~30),
messages[200:] was empty — nothing written to the new session's
SQLite.
Fix: Set conversation_history = None after each _compress_context()
call so start_idx = 0 and all compressed messages are flushed.
2. Gateway-side: history_offset was always len(agent_history) — the
original pre-compression length. After compression shortened the
message list, agent_messages[200:] was empty, causing the gateway
to fall back to writing only a user/assistant pair, losing the
compressed summary and tail context.
Fix: Detect session splits (agent.session_id != original) and set
history_offset = 0 so all compressed messages are written to JSONL.
When the Matrix adapter receives encrypted events it can't decrypt
(MegolmEvent), it now:
1. Requests the missing room key from other devices via
client.request_room_key(event) instead of silently dropping the message
2. Buffers undecrypted events (bounded to 100, 5 min TTL) and retries
decryption after each E2EE maintenance cycle when new keys arrive
3. Auto-trusts/verifies all devices after key queries so other clients
share session keys with the bot proactively
4. Exports Megolm keys on disconnect and imports them on connect, so
session keys survive gateway restarts
This addresses the 'could not decrypt event' warnings that caused the
bot to miss messages in encrypted rooms.
Gateway hygiene pre-compression only checked model.context_length from
the top-level config, missing per-model context_length defined in
custom_providers entries. This caused premature compression for custom
provider users (e.g. 128K default instead of 200K configured).
The AIAgent's own compressor already reads custom_providers correctly
(run_agent.py lines 1171-1189). This adds the same fallback to the
gateway hygiene path, running after runtime provider resolution so
the base_url is available for matching.
* fix: rate-limit pairing rejection messages to prevent spam
When generate_code() returns None (rate limited or max pending), the
"Too many pairing requests" message was sent on every subsequent DM
with no cooldown. A user sending 30 messages would get 30 rejection
replies — reported as potential hack on WhatsApp.
Now check _is_rate_limited() before any pairing response, and record
rate limit after sending a rejection. Subsequent messages from the
same user are silently ignored until the rate limit window expires.
* test: add coverage for pairing response rate limiting
Follow-up to cherry-picked PR #4042 — adds tests verifying:
- Rate-limited users get silently ignored (no response sent)
- Rejection messages record rate limit for subsequent suppression
---------
Co-authored-by: 0xbyt4 <35742124+0xbyt4@users.noreply.github.com>
Adds /profile to COMMAND_REGISTRY (Info category) with handlers in
both CLI and gateway. Shows the active profile name and home directory.
Works on all platforms — CLI, Telegram, Discord, Slack, etc.
Detects profile by checking if HERMES_HOME is under ~/.hermes/profiles/.
Shows 'default' when running without a profile.
* feat: add /yolo slash command to toggle dangerous command approvals
Adds a /yolo command that toggles HERMES_YOLO_MODE at runtime, skipping
all dangerous command approval prompts for the current session. Works in
both CLI and gateway (Telegram, Discord, etc.).
- /yolo -> ON: all commands auto-approved, no confirmation prompts
- /yolo -> OFF: normal approval flow restored
The --yolo CLI flag already existed for launch-time opt-in. This adds
the ability to toggle mid-session without restarting.
Session-scoped — resets when the process ends. Uses the existing
HERMES_YOLO_MODE env var that check_all_command_guards() already
respects.
* fix: prevent context pressure warning spam (agent loop + gateway rate-limit)
Two complementary fixes for repeated context pressure warnings spamming
gateway users (Telegram, Discord, etc.):
1. Agent-level loop fix (run_agent.py):
After compression, only reset _context_pressure_warned if the
post-compression estimate is actually below the 85% warning level.
Previously the flag was unconditionally reset, causing the warning
to re-fire every loop iteration when compression couldn't reduce
below 85% of the threshold (e.g. very low threshold like 15%,
or system prompt alone exceeds the warning level).
2. Gateway-level rate-limit (gateway/run.py, salvaged from PR #3786):
Per-chat_id cooldown of 1 hour on compression warning messages.
Both warning paths ('still large after compression' and 'compression
failed') are gated. Defense-in-depth — even if the agent-level fix
has edge cases, users won't see more than one warning per hour.
Co-authored-by: dlkakbs <dlkakbs@users.noreply.github.com>
---------
Co-authored-by: dlkakbs <dlkakbs@users.noreply.github.com>
* fix: truncate skill descriptions to 100 chars in Telegram menu
* fix: 40-char desc cap + 100 command limit for Telegram menu
setMyCommands has an undocumented total payload size limit.
50 commands with 256-char descriptions failed, 50 with 100-char
worked, and 100 with 40-char descriptions also works (~5300 total
chars). Truncate skill descriptions to 40 chars in the menu picker
and set cap back to 100. Full descriptions available via /commands.
Adds a /yolo command that toggles HERMES_YOLO_MODE at runtime, skipping
all dangerous command approval prompts for the current session. Works in
both CLI and gateway (Telegram, Discord, etc.).
- /yolo -> ON: all commands auto-approved, no confirmation prompts
- /yolo -> OFF: normal approval flow restored
The --yolo CLI flag already existed for launch-time opt-in. This adds
the ability to toggle mid-session without restarting.
Session-scoped — resets when the process ends. Uses the existing
HERMES_YOLO_MODE env var that check_all_command_guards() already
respects.
* fix: use SKILLS_DIR not repo path for Telegram menu skill filter
Skills are synced to ~/.hermes/skills/ (SKILLS_DIR), not the repo's
skills/ directory. The previous filter compared against the repo path
so no skills matched. Now checks SKILLS_DIR and excludes .hub/
subdirectory (user-installed hub skills).
* fix: cap Telegram menu at 50 commands — API rejects above ~60
Telegram's setMyCommands returns BOT_COMMANDS_TOO_MUCH when
registering close to 100 commands despite docs claiming 100 is the
limit. Metadata overhead causes rejection above ~60. Cap at 50 for
reliability — remaining commands accessible via /commands.
* feat(gateway): skill-aware slash commands, paginated /commands, Telegram 100-cap
Map active skills to Telegram's slash command menu so users can
discover and invoke skills directly. Three changes:
1. Telegram menu now includes active skill commands alongside built-in
commands, capped at 100 entries (Telegram Bot API limit). Overflow
commands remain callable but hidden from the picker. Logged at
startup when cap is hit.
2. New /commands [page] gateway command for paginated browsing of all
commands + skills. /help now shows first 10 skill commands and
points to /commands for the full list.
3. When a user types a slash command that matches a disabled or
uninstalled skill, they get actionable guidance:
- Disabled: 'Enable it with: hermes skills config'
- Optional (not installed): 'Install with: hermes skills install official/<path>'
Built on ideas from PR #3921 by @kshitijk4poor.
* chore: move 21 niche skills to optional-skills
Move specialized/niche skills from built-in (skills/) to optional
(optional-skills/) to reduce the default skill count. Users can
install them with: hermes skills install official/<category>/<name>
Moved skills (21):
- mlops: accelerate, chroma, faiss, flash-attention,
hermes-atropos-environments, huggingface-tokenizers, instructor,
lambda-labs, llava, nemo-curator, pinecone, pytorch-lightning,
qdrant, saelens, simpo, slime, tensorrt-llm, torchtitan
- research: domain-intel, duckduckgo-search
- devops: inference-sh cli
Built-in skills: 96 → 75
Optional skills: 22 → 43
* fix: only include repo built-in skills in Telegram menu, not user-installed
User-installed skills (from hub or manually added) stay accessible via
/skills and by typing the command directly, but don't get registered
in the Telegram slash command picker. Only skills whose SKILL.md is
under the repo's skills/ directory are included in the menu.
This keeps the Telegram menu focused on the curated built-in set while
user-installed skills remain discoverable through /skills and /commands.
1. matrix voice: _on_room_message_media unconditionally overwrote
media_urls with the image cache path (always None for non-images),
wiping the locally-cached voice path. Now only overrides when
cached_path is truthy.
2. cli_tools_command: /tools disable no longer prompts for confirmation
(input() removed in earlier commit to fix TUI hang), but tests still
expected the old Y/N prompt flow. Updated tests to match current
behavior (direct apply + session reset).
3. slack app_mention: connect() was refactored for multi-workspace
(creates AsyncWebClient per token), but test only mocked the old
self._app.client path. Added AsyncWebClient and acquire_scoped_lock
mocks.
4. website_policy: module-level _cached_policy from earlier tests caused
fast-path return of None. Added invalidate_cache() before assertion.
5. codex 401 refresh: already passing on current main (fixed by
intervening commit).
* feat(telegram): add webhook mode as alternative to polling
When TELEGRAM_WEBHOOK_URL is set, the adapter starts an HTTP webhook
server (via python-telegram-bot's start_webhook()) instead of long
polling. This enables cloud platforms like Fly.io and Railway to
auto-wake suspended machines on inbound HTTP traffic.
Polling remains the default — no behavior change unless the env var
is set.
Env vars:
TELEGRAM_WEBHOOK_URL Public HTTPS URL for Telegram to push to
TELEGRAM_WEBHOOK_PORT Local listen port (default 8443)
TELEGRAM_WEBHOOK_SECRET Secret token for update verification
Cherry-picked and adapted from PR #2022 by SHL0MS. Preserved all
current main enhancements (network error recovery, polling conflict
detection, DM topics setup).
Co-authored-by: SHL0MS <SHL0MS@users.noreply.github.com>
* fix: send_document call in background task delivery + vision download timeout
Two fixes salvaged from PR #2269 by amethystani:
1. gateway/run.py: adapter.send_file() → adapter.send_document()
send_file() doesn't exist on BasePlatformAdapter. Background task
media files were silently never delivered (AttributeError swallowed
by except Exception: pass).
2. tools/vision_tools.py: configurable image download timeout via
HERMES_VISION_DOWNLOAD_TIMEOUT env var (default 30s), plus guard
against raise None when max_retries=0.
The third fix in #2269 (opencode-go auth config) was already resolved
on main.
Co-authored-by: amethystani <amethystani@users.noreply.github.com>
---------
Co-authored-by: SHL0MS <SHL0MS@users.noreply.github.com>
Co-authored-by: amethystani <amethystani@users.noreply.github.com>
Salvaged from PR #2033 by yoannes. Adds multi-workspace Slack support
so a single Hermes instance can serve multiple Slack workspaces after
OAuth installs.
Changes:
- Support comma-separated bot tokens in SLACK_BOT_TOKEN env var
- Load additional OAuth-persisted tokens from HERMES_HOME/slack_tokens.json
- Route all Slack API calls through workspace-aware _get_client(chat_id)
instead of always using the primary app client
- Track channel → workspace mapping from incoming events
- Per-workspace bot_user_id for correct mention detection
- Workspace-aware file downloads (correct auth token per workspace)
Backward compatible: single-token setups work identically.
Token file format (slack_tokens.json):
{"T12345": {"token": "xoxb-...", "team_name": "My Workspace"}}
Fixed from original PR:
- Uses get_hermes_home() instead of hardcoded ~/.hermes/ path
Co-authored-by: yoannes <yoannes@users.noreply.github.com>
* feat(matrix): support native voice messages
* fix: skip matrix voice tests when matrix-nio not installed
---------
Co-authored-by: Carlos Alberto Pereira Gomes <carlosapgomes@users.noreply.github.com>
When TELEGRAM_WEBHOOK_URL is set, the adapter starts an HTTP webhook
server (via python-telegram-bot's start_webhook()) instead of long
polling. This enables cloud platforms like Fly.io and Railway to
auto-wake suspended machines on inbound HTTP traffic.
Polling remains the default — no behavior change unless the env var
is set.
Env vars:
TELEGRAM_WEBHOOK_URL Public HTTPS URL for Telegram to push to
TELEGRAM_WEBHOOK_PORT Local listen port (default 8443)
TELEGRAM_WEBHOOK_SECRET Secret token for update verification
Cherry-picked and adapted from PR #2022 by SHL0MS. Preserved all
current main enhancements (network error recovery, polling conflict
detection, DM topics setup).
Co-authored-by: SHL0MS <SHL0MS@users.noreply.github.com>
Adds lifecycle hooks to the base platform adapter so Discord (and future
platforms) can react to message processing events:
👀 when processing starts
✅ on successful completion (delivery confirmed)
❌ on failure, error, or cancellation
Implementation:
- base.py: on_processing_start/on_processing_complete hooks with
_run_processing_hook error isolation wrapper; delivery tracking
via _record_delivery closure for accurate success detection
- discord.py: _add_reaction/_remove_reaction helpers + hook overrides
- Tests for base hook lifecycle and Discord-specific reactions
Co-authored-by: alanwilhelm <alanwilhelm@users.noreply.github.com>
Adds Discord-style mention gating for Telegram groups:
- telegram.require_mention: gate group messages (default: false)
- telegram.mention_patterns: regex wake-word triggers
- telegram.free_response_chats: bypass gating for specific chats
When require_mention is enabled, group messages are accepted only for:
- slash commands
- replies to the bot
- @botusername mentions
- regex wake-word pattern matches
DMs remain unrestricted. @mention text is stripped before passing to
the agent. Invalid regex patterns are ignored with a warning.
Config bridges follow the existing Discord pattern (yaml → env vars).
Cherry-picked and adapted from PR #1977 by mcleay. Fixed ChatType
comparison to work without python-telegram-bot installed (uses string
matching instead of enum, consistent with other entity_type checks).
Co-authored-by: mcleay <mcleay@users.noreply.github.com>
Adds WeCom as a gateway platform adapter using the AI Bot WebSocket
gateway for real-time bidirectional communication. No public endpoint
or new pip dependencies needed (uses existing aiohttp + httpx).
Features:
- WebSocket persistent connection with auto-reconnect (exponential backoff)
- DM and group messaging with configurable access policies
- Media upload/download with AES decryption for encrypted attachments
- Markdown rendering, quote context preservation
- Proactive + passive reply message modes
- Chunked media upload pipeline (512KB chunks)
Cherry-picked from PR #1898 by EvilRan with:
- Moved to current main (PR was 300 commits behind)
- Skipped base.py regressions (reply_to additions are good but belong
in a separate PR since they affect all platforms)
- Fixed test assertions to match current base class send() signature
(reply_to=None kwarg now explicit)
- All 16 integration points added surgically to current main
- No new pip dependencies (aiohttp + httpx already installed)
Fixes#1898
Co-authored-by: EvilRan <EvilRan@users.noreply.github.com>
Previously, when no API keys or provider credentials were found, Hermes
silently defaulted to OpenRouter + Claude Opus. This caused confusion
when users configured local servers (LM Studio, Ollama, etc.) with a
typo or unrecognized provider name — the system would silently route to
OpenRouter instead of telling them something was wrong.
Changes:
- resolve_provider() now raises AuthError when no credentials are found
instead of returning 'openrouter' as a silent fallback
- Added local server aliases: lmstudio, ollama, vllm, llamacpp → custom
- Removed hardcoded 'anthropic/claude-opus-4.6' fallback from gateway
and cron scheduler (they read from config.yaml instead)
- Updated cli-config.yaml.example with complete provider documentation
including all supported providers, aliases, and local server setup
* fix: add gpt-5.4-mini to Codex fallback catalog
* fix(telegram): gracefully handle deleted reply targets
When a user deletes their message while Hermes is processing, Telegram
returns BadRequest 'Message to be replied not found'. Previously this
was an unhandled permanent error causing silent delivery failure.
Now clears reply_to_id and retries so the response is still delivered,
matching the existing 'thread not found' recovery pattern.
Inspired by PR #3231 by @heathley. Fixes#3229.
---------
Co-authored-by: Clippy <clippy@grads.flow>
Co-authored-by: Nigel Gibbs <heathley@users.noreply.github.com>
WhatsApp DMs can arrive with LID sender IDs even when
WHATSAPP_ALLOWED_USERS is configured with phone numbers. The allowlist
check now reads bridge session mapping files (lid-mapping-*.json) to
resolve phone↔LID aliases, matching users regardless of which
identifier format the message uses.
Both the Python gateway (_is_user_authorized) and the Node bridge
(allowlist.js) now share the same mapping-file-based resolution logic.
Co-authored-by: Frederico Ribeiro <fr@tecompanytea.com>
Adds Feishu (ByteDance's enterprise messaging platform) as a gateway
platform adapter with full feature parity: WebSocket + webhook transports,
message batching, dedup, rate limiting, rich post/card content parsing,
media handling (images/audio/files/video), group @mention gating,
reaction routing, and interactive card button support.
Cherry-picked from PR #1793 by penwyp with:
- Moved to current main (PR was 458 commits behind)
- Fixed _send_with_retry shadowing BasePlatformAdapter method (renamed to
_feishu_send_with_retry to avoid signature mismatch crash)
- Fixed import structure: aiohttp/websockets imported independently of
lark_oapi so they remain available when SDK is missing
- Fixed get_hermes_home import (hermes_constants, not hermes_cli.config)
- Added skip decorators for tests requiring lark_oapi SDK
- All 16 integration points added surgically to current main
New dependency: lark-oapi>=1.5.3,<2 (optional, pip install hermes-agent[feishu])
Fixes#1788
Co-authored-by: penwyp <penwyp@users.noreply.github.com>
Tool call previews (paths, commands, queries) were hardcoded to truncate
at 35-40 chars across CLI spinners, completion lines, and gateway progress
messages. Users could not see full file paths in tool output.
New config option: display.tool_preview_length (default 0 = no limit).
Set a positive number to truncate at that length.
Changes:
- display.py: module-level _tool_preview_max_len with getter/setter;
build_tool_preview() and get_cute_tool_message() _trunc/_path respect it
- cli.py: reads config at startup, spinner widget respects config
- gateway/run.py: reads config per-message, progress callback respects config
- run_agent.py: removed redundant 30-char quiet-mode spinner truncation
- config.py: added display.tool_preview_length to DEFAULT_CONFIG
Reported by kriskaminski
Replace per-request aiohttp.ClientSession() in every WhatsApp adapter
method with a single persistent self._http_session, matching the pattern
used by Mattermost, HomeAssistant, and SMS adapters.
Changes:
- Create self._http_session in connect(), close in disconnect()
- All bridge HTTP calls (send, edit, send-media, typing, get_chat_info,
poll_messages) now use the shared session
- Explicitly cancel _poll_task on disconnect() instead of relying
solely on self._running = False
- Health-check sessions in connect() remain ephemeral (persistent
session not yet created at that point)
- Remove per-method ImportError guards for aiohttp (always available
when gateway runs via [messaging] extras)
Salvaged from PR #1851 by Himess. The _poll_task storage was already
on main from PR #3267; this adds the disconnect cancellation and the
persistent session.
Tests: 4 new tests for session close, already-closed skip, poll task
cancellation, and done-task skip.
Extends the single fallback_model mechanism into an ordered chain.
When the primary model fails, Hermes tries each fallback provider in
sequence until one succeeds or the chain is exhausted.
Config format (new):
fallback_providers:
- provider: openrouter
model: anthropic/claude-sonnet-4
- provider: openai
model: gpt-4o
Legacy single-dict fallback_model format still works unchanged.
Key fix vs original PR: the call sites in the retry loop now use
_fallback_index < len(_fallback_chain) instead of the old one-shot
_fallback_activated guard, so the chain actually advances through
all configured providers.
Changes:
- run_agent.py: _fallback_chain list + _fallback_index replaces
one-shot _fallback_model; _try_activate_fallback() advances
through chain; failed provider resolution skips to next entry;
call sites updated to allow chain advancement
- cli.py: reads fallback_providers with legacy fallback_model compat
- gateway/run.py: same
- hermes_cli/config.py: fallback_providers: [] in DEFAULT_CONFIG
- tests: 12 new chain tests + 6 existing test fixtures updated
Co-authored-by: uzaylisak <uzaylisak@users.noreply.github.com>
Home channel env vars (SLACK_HOME_CHANNEL, SIGNAL_HOME_CHANNEL, etc.)
for Slack, Signal, Mattermost, Matrix, Email, and SMS were nested
inside the credential-env blocks, so they were ignored when the
platform was already configured via config.yaml.
Moved the home channel handling outside the credential blocks with a
Platform.X in config.platforms guard, matching the existing pattern
for Telegram and Discord.
Co-authored-by: cutepawss <cutepawss@users.noreply.github.com>
SMTP connections in _send_email() and _send_email_with_attachment() leak
when login() or send_message() raises before quit() is reached. Both now
wrapped in try/finally with a close() fallback if quit() also fails.
IMAP connection in _fetch_new_messages() leaks when UID processing raises,
since logout() sits after the loop. Restructured with try/finally so
logout() runs unconditionally.
Co-authored-by: Himess <Himess@users.noreply.github.com>
Replace all 5 plain open(config_path, 'w') calls in gateway command
handlers with atomic_yaml_write() from utils.py. This uses the
established tempfile + fsync + os.replace pattern to ensure config.yaml
is never left half-written if the process is killed mid-write.
Affected handlers: /personality (clear + set), /sethome, /reasoning
(_save_config_key helper), /verbose (tool_progress cycling).
Also fixes missing encoding='utf-8' on the /personality clear write.
Salvaged from PR #1211 by albatrosjj.
Community review (devoruncommented) correctly identified that the Slack
adapter re-read SLACK_APP_TOKEN from os.getenv() during disconnect,
which could differ from the value used during connect if the environment
changed. Discord had the same pattern with self.config.token (less risky
but still not bulletproof).
Both now follow the Telegram pattern: store the token identity on self
at acquire time, use the stored value for release, clear after release.
Also fixes docs: alias naming was hermes-<name> in docs but actual
implementation creates <name> directly (e.g. ~/.local/bin/coder not
~/.local/bin/hermes-coder).
