The gateway created a fresh AIAgent per message, rebuilding the system
prompt (including memory, skills, context files) every turn. This broke
prompt prefix caching — providers like Anthropic charge ~10x more for
uncached prefixes.
Now caches AIAgent instances per session_key with a config signature.
The cached agent is reused across messages in the same session,
preserving the frozen system prompt and tool schemas. Cache is
invalidated when:
- Config changes (model, provider, toolsets, reasoning, ephemeral
prompt) — detected via signature mismatch
- /new, /reset, /clear — explicit session reset
- /model — global model change clears all cached agents
- /reasoning — global reasoning change clears all cached agents
Per-message state (callbacks, stream consumers, progress queues) is
set on the agent instance before each run_conversation() call.
This matches CLI behavior where a single AIAgent lives across all turns
in a session, with _cached_system_prompt built once and reused.
Fixes#1803. send_image_file, send_document, and send_video were missing
message_thread_id forwarding, causing them to fail in Telegram forum/supergroups
where thread_id is required. send_voice already handled this correctly. Adds
metadata parameter + message_thread_id to all three methods, and adds tests
covering the thread_id forwarding path.
Bare strings like "image", "audio", "document" were appended to
media_types, but downstream run.py checks mtype.startswith("image/")
and mtype.startswith("audio/"), which never matched. This caused all
Mattermost file attachments to be silently dropped from vision/STT
processing. Use the actual MIME type from file_info instead.
When streaming is enabled, the base adapter receives None from
_handle_message (already_sent=True) and cannot run auto-TTS for
voice input. The runner was unconditionally skipping voice input
TTS assuming the base adapter would handle it.
Now the runner takes over TTS responsibility when streaming has
already delivered the text response, so voice channel playback
works with both streaming on and off.
Streaming off behavior is unchanged (default already_sent=False
preserves the original code path exactly).
Co-authored-by: 0xbyt4 <35742124+0xbyt4@users.noreply.github.com>
A single Telegram 409 Conflict from getUpdates permanently killed
Telegram polling with no recovery possible (retryable=False on
first occurrence). This is too aggressive for production use with
process supervisors.
Transient 409s are expected during:
- --replace handoffs where the old long-poll session lingers on
Telegram servers for a few seconds after SIGTERM
- systemd Restart=on-failure respawns that overlap with the dying
instance cleanup
Now _handle_polling_conflict() retries up to 3 times with a
10-second delay between attempts. The 30-second total retry window
lets stale server-side sessions expire. If all retries fail, the
error is still marked as permanently fatal — preserving the original
protection against genuine dual-instance conflicts.
Tests updated: split the single conflict test into two — one verifying
retry on transient conflict, one verifying fatal after exhausted
retries.
Closes#2296
- Convert ~~text~~ to ~text~ (MarkdownV2 strikethrough)
- Protect ||text|| from pipe escaping (MarkdownV2 spoiler)
- Preserve > at line start as blockquote instead of escaping it
- Update _strip_mdv2() to strip ~strikethrough~ and ||spoiler|| markers
- Add tests covering new formatting paths and edge cases
Place a sentinel in _running_agents immediately after the "already
running" guard check passes — before any await. Without this, the
numerous await points between the guard (line 1324) and agent
registration (track_agent at line 4790) create a window where a
second message for the same session can bypass the guard and start
a duplicate agent, corrupting the transcript.
The await gap includes: hook emissions, vision enrichment (external
API call), audio transcription (external API call), session hygiene
compression, and the run_in_executor call itself. For messages with
media attachments the window can be several seconds wide.
The sentinel is wrapped in try/finally so it is always cleaned up —
even if the handler raises or takes an early-return path. When the
real AIAgent is created, track_agent() overwrites the sentinel with
the actual instance (preserving interrupt support).
Also handles the edge case where a message arrives while the sentinel
is set but no real agent exists yet: the message is queued via the
adapter's pending-message mechanism instead of attempting to call
interrupt() on the sentinel object.
The gateway approval system previously intercepted bare 'yes'/'no' text
from the user's next message to approve/deny dangerous commands. This was
fragile and dangerous — if the agent asked a clarify question and the user
said 'yes' to answer it, the gateway would execute the pending dangerous
command instead. (Fixes#1888)
Changes:
- Remove bare text matching ('yes', 'y', 'approve', 'ok', etc.) from
_handle_message approval check
- Add /approve and /deny as gateway-only slash commands in the command
registry
- /approve supports scoping: /approve (one-time), /approve session,
/approve always (permanent)
- Add 5-minute timeout for stale approvals
- Gateway appends structured instructions to the agent response when a
dangerous command is pending, telling the user exactly how to respond
- 9 tests covering approve, deny, timeout, scoping, and verification
that bare 'yes' no longer triggers execution
Credit to @solo386 and @FlyByNight69420 for identifying and reporting
this security issue in PR #1971 and issue #1888.
Co-authored-by: Test <test@test.com>
Add unauthorized_dm_behavior config (pair|ignore) with global default
and per-platform override. WhatsApp can silently drop unknown DMs
instead of sending pairing codes.
Adapted config bridging to work with gw_data dict (pre-construction)
rather than config object. Dropped implementation plan document.
Co-authored-by: Frederico Ribeiro <fr@tecompanytea.com>
Recognize hermes_cli/main.py gateway command lines in gateway
process detection and PID validation so --replace reliably finds
existing gateway instances.
Adds a regression test covering script-style cmdline detection.
Closes#1830
* feat: OpenAI-compatible API server platform adapter
Salvaged from PR #956, updated for current main.
Adds an HTTP API server as a gateway platform adapter that exposes
hermes-agent via the OpenAI Chat Completions and Responses APIs.
Any OpenAI-compatible frontend (Open WebUI, LobeChat, LibreChat,
AnythingLLM, NextChat, ChatBox, etc.) can connect by pointing at
http://localhost:8642/v1.
Endpoints:
- POST /v1/chat/completions — stateless Chat Completions API
- POST /v1/responses — stateful Responses API with chaining
- GET /v1/responses/{id} — retrieve stored response
- DELETE /v1/responses/{id} — delete stored response
- GET /v1/models — list hermes-agent as available model
- GET /health — health check
Features:
- Real SSE streaming via stream_delta_callback (uses main's streaming)
- In-memory LRU response store for Responses API conversation chaining
- Named conversations via 'conversation' parameter
- Bearer token auth (optional, via API_SERVER_KEY)
- CORS support for browser-based frontends
- System prompt layering (frontend system messages on top of core)
- Real token usage tracking in responses
Integration points:
- Platform.API_SERVER in gateway/config.py
- _create_adapter() branch in gateway/run.py
- API_SERVER_* env vars in hermes_cli/config.py
- Env var overrides in gateway/config.py _apply_env_overrides()
Changes vs original PR #956:
- Removed streaming infrastructure (already on main via stream_consumer.py)
- Removed Telegram reply_to_mode (separate feature, not included)
- Updated _resolve_model() -> _resolve_gateway_model()
- Updated stream_callback -> stream_delta_callback
- Updated connect()/disconnect() to use _mark_connected()/_mark_disconnected()
- Adapted to current Platform enum (includes MATTERMOST, MATRIX, DINGTALK)
Tests: 72 new tests, all passing
Docs: API server guide, Open WebUI integration guide, env var reference
* feat(whatsapp): make reply prefix configurable via config.yaml
Reworked from PR #1764 (ifrederico) to use config.yaml instead of .env.
The WhatsApp bridge prepends a header to every outgoing message.
This was hardcoded to '⚕ *Hermes Agent*'. Users can now customize
or disable it via config.yaml:
whatsapp:
reply_prefix: '' # disable header
reply_prefix: '🤖 *My Bot*\n───\n' # custom prefix
How it works:
- load_gateway_config() reads whatsapp.reply_prefix from config.yaml
and stores it in PlatformConfig.extra['reply_prefix']
- WhatsAppAdapter reads it from config.extra at init
- When spawning bridge.js, the adapter passes it as
WHATSAPP_REPLY_PREFIX in the subprocess environment
- bridge.js handles undefined (default), empty (no header),
or custom values with \\n escape support
- Self-chat echo suppression uses the configured prefix
Also fixes _config_version: was 9 but ENV_VARS_BY_VERSION had a
key 10 (TAVILY_API_KEY), so existing users at v9 would never be
prompted for Tavily. Bumped to 10 to close the gap. Added a
regression test to prevent this from happening again.
Credit: ifrederico (PR #1764) for the bridge.js implementation
and the config version gap discovery.
---------
Co-authored-by: Test <test@test.com>
Wrap json.loads() in load_transcript() with try/except JSONDecodeError
so that partial JSONL lines (from mid-write crashes like OOM/SIGKILL)
are skipped with a warning instead of crashing the entire transcript
load. The rest of the history loads fine.
Adds a logger.warning with the session ID and truncated corrupt line
content for debugging visibility.
Salvaged from PR #1193 by alireza78a.
Closes#1193
Salvaged from PR #1573 by @eren-karakus0. Cherry-picked with authorship preserved.
Fixes#1143 — background process notifications resume after gateway restart.
Co-authored-by: Muhammet Eren Karakuş <erenkar950@gmail.com>
Add DingTalk as a messaging platform using the dingtalk-stream SDK
for real-time message reception via Stream Mode (no webhook needed).
Replies are sent via session webhook using markdown format.
Features:
- Stream Mode connection (long-lived WebSocket, no public URL needed)
- Text and rich text message support
- DM and group chat support
- Message deduplication with 5-minute window
- Auto-reconnection with exponential backoff
- Session webhook caching for reply routing
Configuration:
export DINGTALK_CLIENT_ID=your-app-key
export DINGTALK_CLIENT_SECRET=your-app-secret
# or in config.yaml:
platforms:
dingtalk:
enabled: true
extra:
client_id: your-app-key
client_secret: your-app-secret
Files:
- gateway/platforms/dingtalk.py (340 lines) — adapter implementation
- gateway/config.py — add DINGTALK to Platform enum
- gateway/run.py — add DingTalk to _create_adapter
- hermes_cli/config.py — add env vars to _EXTRA_ENV_KEYS
- hermes_cli/tools_config.py — add dingtalk to PLATFORMS
- tests/gateway/test_dingtalk.py — 21 tests
When a user sends a long message, Telegram clients split it into
multiple updates that arrive within milliseconds of each other.
Previously each chunk was dispatched independently — the first would
start the agent, and subsequent chunks would interrupt or queue as
separate turns, causing the agent to only see part of the message.
Add text message batching to TelegramAdapter following the same pattern
as the existing photo burst batching:
- _enqueue_text_event() buffers text by session key, concatenating
chunks that arrive in rapid succession
- _flush_text_batch() dispatches the combined message after a 0.6s
quiet period (configurable via HERMES_TELEGRAM_TEXT_BATCH_DELAY_SECONDS)
- Timer resets on each new chunk, so all parts of a split arrive
before the batch is dispatched
Reported by NulledVector on Discord.
_bot_participated_threads was an in-memory set — lost on every restart.
After restart, the bot forgot which threads it was active in, requiring
fresh @mentions and potentially creating duplicate threads instead of
continuing existing conversations.
Changes:
- Persist thread IDs to ~/.hermes/discord_threads.json
- Load on adapter init, save on every new thread participation
- _track_thread() replaces direct .add() calls for atomic persist
- Cap at 500 tracked threads to prevent unbounded growth
- /thread slash command also tracks participation
- 7 new tests covering persistence, restart survival, corruption
recovery, cap enforcement
Small models (7B-14B) can't reliably use MEDIA: or IMAGE: syntax. This
adds extract_local_files() to BasePlatformAdapter that regex-detects
bare local file paths ending in image/video extensions, validates them
with os.path.isfile(), and delivers them as native platform attachments.
Hardened over the original PR:
- Code-block exclusion: paths inside fenced blocks and inline code are
skipped so code samples are never mutilated
- URL rejection: negative lookbehind prevents matching path segments
inside HTTP URLs
- Relative path rejection: ./foo.png no longer matches
- Tilde path cleanup: raw ~/... form is removed from response text
- Deduplication by expanded path
- Added .webm to _VIDEO_EXTS
- Fallback to send_document for unrecognized media extensions
Based on PR #1636 by sudoingX.
Co-authored-by: sudoingX <sudoingX@users.noreply.github.com>
Verifies that write_runtime_status() overwrites pid and start_time
from a previous process rather than preserving them via setdefault().
Covers the fix from PR #1632.
* refactor: centralize slash command registry
Replace 7+ scattered command definition sites with a single
CommandDef registry in hermes_cli/commands.py. All downstream
consumers now derive from this registry:
- CLI process_command() resolves aliases via resolve_command()
- Gateway _known_commands uses GATEWAY_KNOWN_COMMANDS frozenset
- Gateway help text generated by gateway_help_lines()
- Telegram BotCommands generated by telegram_bot_commands()
- Slack subcommand map generated by slack_subcommand_map()
Adding a command or alias is now a one-line change to
COMMAND_REGISTRY instead of touching 6+ files.
Bugfixes included:
- Telegram now registers /rollback, /background (were missing)
- Slack now has /voice, /update, /reload-mcp (were missing)
- Gateway duplicate 'reasoning' dispatch (dead code) removed
- Gateway help text can no longer drift from CLI help
Backwards-compatible: COMMANDS and COMMANDS_BY_CATEGORY dicts are
rebuilt from the registry, so existing imports work unchanged.
* docs: update developer docs for centralized command registry
Update AGENTS.md with full 'Slash Command Registry' and 'Adding a
Slash Command' sections covering CommandDef fields, registry helpers,
and the one-line alias workflow.
Also update:
- CONTRIBUTING.md: commands.py description
- website/docs/reference/slash-commands.md: reference central registry
- docs/plans/centralize-command-registry.md: mark COMPLETED
- plans/checkpoint-rollback.md: reference new pattern
- hermes-agent-dev skill: architecture table
* chore: remove stale plan docs
* feat: add optional smart model routing
Add a conservative cheap-vs-strong routing option that can send very short/simple turns to a cheaper model across providers while keeping the primary model for complex work. Wire it through CLI, gateway, and cron, and document the config.yaml workflow.
* fix(gateway): remove recursive ExecStop from systemd units, extend TimeoutStopSec to 60s
* fix(gateway): avoid recursive ExecStop in user systemd unit
* fix: extend ExecStop removal and TimeoutStopSec=60 to system unit
The cherry-picked PR #1448 fix only covered the user systemd unit.
The system unit had the same TimeoutStopSec=15 and could benefit
from the same 60s timeout for clean shutdown. Also adds a regression
test for the system unit.
---------
Co-authored-by: Ninja <ninja@local>
* feat(skills): add blender-mcp optional skill for 3D modeling
Control a running Blender instance from Hermes via socket connection
to the blender-mcp addon (port 9876). Supports creating 3D objects,
materials, animations, and running arbitrary bpy code.
Placed in optional-skills/ since it requires Blender 4.3+ desktop
with a third-party addon manually started each session.
* feat(acp): support slash commands in ACP adapter (#1532)
Adds /help, /model, /tools, /context, /reset, /compact, /version
to the ACP adapter (VS Code, Zed, JetBrains). Commands are handled
directly in the server without instantiating the TUI — each command
queries agent/session state and returns plain text.
Unrecognized /commands fall through to the LLM as normal messages.
/model uses detect_provider_for_model() for auto-detection when
switching models, matching the CLI and gateway behavior.
Fixes#1402
* fix(logging): improve error logging in session search tool (#1533)
* fix(gateway): restart on retryable startup failures (#1517)
* feat(email): add skip_attachments option via config.yaml
* feat(email): add skip_attachments option via config.yaml
Adds a config.yaml-driven option to skip email attachments in the
gateway email adapter. Useful for malware protection and bandwidth
savings.
Configure in config.yaml:
platforms:
email:
skip_attachments: true
Based on PR #1521 by @an420eth, changed from env var to config.yaml
(via PlatformConfig.extra) to match the project's config-first pattern.
* docs: document skip_attachments option for email adapter
* fix(telegram): retry on transient TLS failures during connect and send
Add exponential-backoff retry (3 attempts) around initialize() to
handle transient TLS resets during gateway startup. Also catches
TimedOut and OSError in addition to NetworkError.
Add exponential-backoff retry (3 attempts) around send_message() for
NetworkError during message delivery, wrapping the existing Markdown
fallback logic.
Both imports are guarded with try/except ImportError for test
environments where telegram is mocked.
Based on PR #1527 by cmd8. Closes#1526.
* feat: permissive block_anchor thresholds and unicode normalization (#1539)
Salvaged from PR #1528 by an420eth. Closes#517.
Improves _strategy_block_anchor in fuzzy_match.py:
- Add unicode normalization (smart quotes, em/en-dashes, ellipsis,
non-breaking spaces → ASCII) so LLM-produced unicode artifacts
don't break anchor line matching
- Lower thresholds: 0.10 for unique matches (was 0.70), 0.30 for
multiple candidates — if first/last lines match exactly, the
block is almost certainly correct
- Use original (non-normalized) content for offset calculation to
preserve correct character positions
Tested: 3 new scenarios fixed (em-dash anchors, non-breaking space
anchors, very-low-similarity unique matches), zero regressions on
all 9 existing fuzzy match tests.
Co-authored-by: an420eth <an420eth@users.noreply.github.com>
* feat(cli): add file path autocomplete in the input prompt (#1545)
When typing a path-like token (./ ../ ~/ / or containing /),
the CLI now shows filesystem completions in the dropdown menu.
Directories show a trailing slash and 'dir' label; files show
their size. Completions are case-insensitive and capped at 30
entries.
Triggered by tokens like:
edit ./src/ma → shows ./src/main.py, ./src/manifest.json, ...
check ~/doc → shows ~/docs/, ~/documents/, ...
read /etc/hos → shows /etc/hosts, /etc/hostname, ...
open tools/reg → shows tools/registry.py
Slash command autocomplete (/help, /model, etc.) is unaffected —
it still triggers when the input starts with /.
Inspired by OpenCode PR #145 (file path completion menu).
Implementation:
- hermes_cli/commands.py: _extract_path_word() detects path-like
tokens, _path_completions() yields filesystem Completions with
size labels, get_completions() routes to paths vs slash commands
- tests/hermes_cli/test_path_completion.py: 26 tests covering
path extraction, prefix filtering, directory markers, home
expansion, case-insensitivity, integration with slash commands
* feat(privacy): redact PII from LLM context when privacy.redact_pii is enabled
Add privacy.redact_pii config option (boolean, default false). When
enabled, the gateway redacts personally identifiable information from
the system prompt before sending it to the LLM provider:
- Phone numbers (user IDs on WhatsApp/Signal) → hashed to user_<sha256>
- User IDs → hashed to user_<sha256>
- Chat IDs → numeric portion hashed, platform prefix preserved
- Home channel IDs → hashed
- Names/usernames → NOT affected (user-chosen, publicly visible)
Hashes are deterministic (same user → same hash) so the model can
still distinguish users in group chats. Routing and delivery use
the original values internally — redaction only affects LLM context.
Inspired by OpenClaw PR #47959.
* fix(privacy): skip PII redaction on Discord/Slack (mentions need real IDs)
Discord uses <@user_id> for mentions and Slack uses <@U12345> — the LLM
needs the real ID to tag users. Redaction now only applies to WhatsApp,
Signal, and Telegram where IDs are pure routing metadata.
Add 4 platform-specific tests covering Discord, WhatsApp, Signal, Slack.
* feat: smart approvals + /stop command (inspired by OpenAI Codex)
* feat: smart approvals — LLM-based risk assessment for dangerous commands
Adds a 'smart' approval mode that uses the auxiliary LLM to assess
whether a flagged command is genuinely dangerous or a false positive,
auto-approving low-risk commands without prompting the user.
Inspired by OpenAI Codex's Smart Approvals guardian subagent
(openai/codex#13860).
Config (config.yaml):
approvals:
mode: manual # manual (default), smart, off
Modes:
- manual — current behavior, always prompt the user
- smart — aux LLM evaluates risk: APPROVE (auto-allow), DENY (block),
or ESCALATE (fall through to manual prompt)
- off — skip all approval prompts (equivalent to --yolo)
When smart mode auto-approves, the pattern gets session-level approval
so subsequent uses of the same pattern don't trigger another LLM call.
When it denies, the command is blocked without user prompt. When
uncertain, it escalates to the normal manual approval flow.
The LLM prompt is carefully scoped: it sees only the command text and
the flagged reason, assesses actual risk vs false positive, and returns
a single-word verdict.
* feat: make smart approval model configurable via config.yaml
Adds auxiliary.approval section to config.yaml with the same
provider/model/base_url/api_key pattern as other aux tasks (vision,
web_extract, compression, etc.).
Config:
auxiliary:
approval:
provider: auto
model: '' # fast/cheap model recommended
base_url: ''
api_key: ''
Bridged to env vars in both CLI and gateway paths so the aux client
picks them up automatically.
* feat: add /stop command to kill all background processes
Adds a /stop slash command that kills all running background processes
at once. Currently users have to process(list) then process(kill) for
each one individually.
Inspired by OpenAI Codex's separation of interrupt (Ctrl+C stops current
turn) from /stop (cleans up background processes). See openai/codex#14602.
Ctrl+C continues to only interrupt the active agent turn — background
dev servers, watchers, etc. are preserved. /stop is the explicit way
to clean them all up.
* feat: first-class plugin architecture + hide status bar cost by default (#1544)
The persistent status bar now shows context %, token counts, and
duration but NOT $ cost by default. Cost display is opt-in via:
display:
show_cost: true
in config.yaml, or: hermes config set display.show_cost true
The /usage command still shows full cost breakdown since the user
explicitly asked for it — this only affects the always-visible bar.
Status bar without cost:
⚕ claude-sonnet-4 │ 12K/200K │ 6% │ 15m
Status bar with show_cost: true:
⚕ claude-sonnet-4 │ 12K/200K │ 6% │ $0.06 │ 15m
* feat: improve memory prioritization + aggressive skill updates (inspired by OpenAI Codex)
* feat: improve memory prioritization — user preferences over procedural knowledge
Inspired by OpenAI Codex's memory prompt improvements (openai/codex#14493)
which focus memory writes on user preferences and recurring patterns
rather than procedural task details.
Key insight: 'Optimize for reducing future user steering — the most
valuable memory prevents the user from having to repeat themselves.'
Changes:
- MEMORY_GUIDANCE (prompt_builder.py): added prioritization hierarchy
and the core principle about reducing user steering
- MEMORY_SCHEMA (memory_tool.py): reordered WHEN TO SAVE list to put
corrections first, added explicit PRIORITY guidance
- Memory nudge (run_agent.py): now asks specifically about preferences,
corrections, and workflow patterns instead of generic 'anything'
- Memory flush (run_agent.py): now instructs to prioritize user
preferences and corrections over task-specific details
* feat: more aggressive skill creation and update prompting
Press harder on skill updates — the agent should proactively patch
skills when it encounters issues during use, not wait to be asked.
Changes:
- SKILLS_GUIDANCE: 'consider saving' → 'save'; added explicit instruction
to patch skills immediately when found outdated/wrong
- Skills header: added instruction to update loaded skills before finishing
if they had missing steps or wrong commands
- Skill nudge: more assertive ('save the approach' not 'consider saving'),
now also prompts for updating existing skills used in the task
- Skill nudge interval: lowered default from 15 to 10 iterations
- skill_manage schema: added 'patch it immediately' to update triggers
* feat: first-class plugin architecture (#1555)
Plugin system for extending Hermes with custom tools, hooks, and
integrations — no source code changes required.
Core system (hermes_cli/plugins.py):
- Plugin discovery from ~/.hermes/plugins/, .hermes/plugins/, and
pip entry_points (hermes_agent.plugins group)
- PluginContext with register_tool() and register_hook()
- 6 lifecycle hooks: pre/post tool_call, pre/post llm_call,
on_session_start/end
- Namespace package handling for relative imports in plugins
- Graceful error isolation — broken plugins never crash the agent
Integration (model_tools.py):
- Plugin discovery runs after built-in + MCP tools
- Plugin tools bypass toolset filter via get_plugin_tool_names()
- Pre/post tool call hooks fire in handle_function_call()
CLI:
- /plugins command shows loaded plugins, tool counts, status
- Added to COMMANDS dict for autocomplete
Docs:
- Getting started guide (build-a-hermes-plugin.md) — full tutorial
building a calculator plugin step by step
- Reference page (features/plugins.md) — quick overview + tables
- Covers: file structure, schemas, handlers, hooks, data files,
bundled skills, env var gating, pip distribution, common mistakes
Tests: 16 tests covering discovery, loading, hooks, tool visibility.
* feat: add /bg as alias for /background slash command
Adds /bg alias across CLI, gateway, and Slack platform adapter.
Updates help text, autocomplete, known_commands set, and dispatch
logic. Includes tests for the new alias.
* docs: add plan for centralized slash command registry
Scopes a refactor to replace 7+ scattered command definition sites
with a single CommandDef registry in hermes_cli/commands.py. Includes
derived helper functions for gateway help text, Telegram BotCommands,
Slack subcommand maps, and alias resolution.
Documents current drift (Telegram missing /rollback + /background,
Slack missing /voice + /update, gateway dead code) that the refactor
fixes for free.
---------
Co-authored-by: Ninja <ninja@local>
Co-authored-by: alireza78a <alireza78a@users.noreply.github.com>
Co-authored-by: Oktay Aydin <113846926+aydnOktay@users.noreply.github.com>
Co-authored-by: JP Lew <polydegen@protonmail.com>
Co-authored-by: an420eth <an420eth@users.noreply.github.com>
Discord uses <@user_id> for mentions and Slack uses <@U12345> — the LLM
needs the real ID to tag users. Redaction now only applies to WhatsApp,
Signal, and Telegram where IDs are pure routing metadata.
Add 4 platform-specific tests covering Discord, WhatsApp, Signal, Slack.
Add privacy.redact_pii config option (boolean, default false). When
enabled, the gateway redacts personally identifiable information from
the system prompt before sending it to the LLM provider:
- Phone numbers (user IDs on WhatsApp/Signal) → hashed to user_<sha256>
- User IDs → hashed to user_<sha256>
- Chat IDs → numeric portion hashed, platform prefix preserved
- Home channel IDs → hashed
- Names/usernames → NOT affected (user-chosen, publicly visible)
Hashes are deterministic (same user → same hash) so the model can
still distinguish users in group chats. Routing and delivery use
the original values internally — redaction only affects LLM context.
Inspired by OpenClaw PR #47959.
Salvaged from PR #1470 by adavyas.
Core fix: Honcho tool calls in a multi-session gateway could route to
the wrong session because honcho_tools.py relied on process-global
state. Now threads session context through the call chain:
AIAgent._invoke_tool() → handle_function_call() → registry.dispatch()
→ handler **kw → _resolve_session_context()
Changes:
- Add _resolve_session_context() to prefer per-call context over globals
- Plumb honcho_manager + honcho_session_key through handle_function_call
- Add sync_honcho=False to run_conversation() for synthetic flush turns
- Pass honcho_session_key through gateway memory flush lifecycle
- Harden gateway PID detection when /proc cmdline is unreadable
- Make interrupt test scripts import-safe for pytest-xdist
- Wrap BibTeX examples in Jekyll raw blocks for docs build
- Fix thread-order-dependent assertion in client lifecycle test
- Expand Honcho docs: session isolation, lifecycle, routing internals
Dropped from original PR:
- Indentation change in _create_request_openai_client that would move
client creation inside the lock (causes unnecessary contention)
Co-authored-by: adavyas <adavyas@users.noreply.github.com>
default group and channel sessions to per-user isolation, allow opting back into shared room sessions via config.yaml, and document Discord gateway routing and session behavior.
Include participant identifiers in non-DM session keys when available so group and channel conversations no longer share one transcript across every active user in the chat.
Add _ensure_ssl_certs() that discovers CA certificate bundles before any
HTTP library is imported. Resolution order:
1. Python's ssl.get_default_verify_paths()
2. certifi (if installed)
3. Common distro/macOS paths
Only sets SSL_CERT_FILE if not already present in the environment.
Wrapped in a function (called immediately) to avoid polluting module
namespace.
Based on PR #1151 by sylvesterroos.
Restore local STT command fallback for voice transcription, detect whisper and ffmpeg in common local install paths, and avoid bogus no-provider messaging when only a backend-specific key is missing.
Complete the YAML null handling for all three SessionResetPolicy fields.
at_hour and idle_minutes already had null coalescing; mode was still
using data.get('mode', 'both') which returns None when the key exists
with an explicit null value.
Add regression test covering all-null input.
Based on PR #1120 by stablegenius49.
Two changes to align Discord behavior with Slack:
1. Auto-thread on @mention (default: true)
- When someone @mentions the bot in a server channel, a thread is
automatically created from their message and the response goes there.
- Each thread gets its own isolated session (like Slack).
- Configurable via discord.auto_thread in config.yaml (default: true)
or DISCORD_AUTO_THREAD env var (env takes precedence).
- DMs and existing threads are unaffected.
2. Skip @mention in bot-participated threads
- Once the bot has responded in a thread (auto-created or manually
entered), subsequent messages in that thread no longer require
@mention. Users can just type normally.
- Tracked via in-memory set (_bot_participated_threads). After a
gateway restart, users need to @mention once to re-establish.
- Threads the bot hasn't participated in still require @mention.
Config change:
discord:
auto_thread: true # new, added to DEFAULT_CONFIG
Tests: 7 new tests covering auto-thread default, disable, bot thread
participation tracking, and mention skip logic. All 903 gateway tests pass.
When a cronjob is created from within a Telegram or Slack thread,
deliver=origin was posting to the parent channel instead of the thread.
Root cause: the gateway never set HERMES_SESSION_THREAD_ID in the
session environment, so cronjob_tools.py could not capture thread_id
into the job's origin metadata — even though the scheduler already
reads origin.get('thread_id').
Fix:
- gateway/run.py: set HERMES_SESSION_THREAD_ID when thread_id is
present on the session context, and clear it in _clear_session_env
- tools/cronjob_tools.py: read HERMES_SESSION_THREAD_ID into origin
Closes#1219
Add an explicit messaging-extra install hint to the missing PyNaCl/davey error path, cover it with a voice-channel join regression test, and skip the low-level NaCl packet tests when PyNaCl is not installed locally.
Tests cover the actual code paths changed in voice fixes:
_on_packet DAVE passthrough (8 tests):
- Known SSRC + DAVE decrypt success → buffered
- Unknown SSRC + DAVE → skip DAVE, passthrough to Opus
- DAVE "Unencrypted" error → passthrough, not dropped
- DAVE other error → packet dropped
- No DAVE session → direct decode
- Bot's own SSRC → ignored (echo prevention)
- Multiple SSRCs → separate buffers
SSRC auto-mapping (6 tests):
- Single allowed user → auto-mapped
- Multiple allowed users → no auto-map
- No allowlist → sole non-bot member inferred
- Unallowed user → rejected
- Only bot in channel → no map
- Auto-map persists across checks
Buffer lifecycle (4 tests):
- Known SSRC completed utterance
- Short buffer ignored
- Recent audio waits
- Stale unknown buffer discarded
TTS playback (10 tests):
- play_tts calls play_in_voice_channel in VC
- play_tts falls through when not in VC
- play_tts wrong channel no match
- Voice input dedup (runner skips)
- Text + voice_mode combinations
- Error/empty response skipped
- Agent TTS tool dedup
UDP keepalive (2 tests):
- Interval within bounds
- Silence frame actually sent via send_packet
play_tts was returning success without playing anything when bot was
in a voice channel. Now it calls play_in_voice_channel directly.
Simplified skip_double dedup: base adapter handles voice input TTS
via play_tts (which now works for VC), runner skips to avoid double.
Track adapter background message-processing tasks, cancel them during gateway shutdown, and interrupt running agents before disconnecting adapters. This prevents old gateway instances from continuing in-flight work after stop/replace, which was contributing to the restart-time task continuation/flicker behavior reported in #1414. Adds regression coverage for adapter task cancellation and shutdown interrupts.
