ledger
99eba1e1de
Q63 closed the stripped-assert population atc033059(0 of 87) by converting these four files' asserts to _check(), which raises SystemExit so 'python3 -O' cannot compile the check away. Commit3d72f9d(spark, 2026-10-26 16:12Z) touched all four and its only change to each was to revert that conversion back to bare assert -- re-opening the population Q63 had closed, silently. Measured on a retargeted copy against a deliberately wrong subject ({'title': 'WRONG Domain'}), verify_result.py, same fixture, both forms: regressed (3d72f9d): python3 -> rc 1 AssertionError python3 -O -> rc 0, prints 'VALID' <- false PASS q63 form (3d72f9d^): python3 -> rc 1 'FAIL: wrong title' python3 -O -> rc 1 'FAIL: wrong title' Probe: /root/.hermes/profiles/volt/cache/scratch/q86/{regressed,q63form}.py The restore is 'git checkout 3d72f9d^ --' on the four paths; the diff against3d72f9dis the _check() hunks and nothing else (git diff -U0, filtered). q63_verify_scan.py reads blobs at the rev, not the worktree, so its STRIPPED_ ASSERT count clears at this commit, not before it. Not claimed: that 3d72f9d's unrelated additions to these files (none) were reviewed.
30 lines
1.1 KiB
Python
30 lines
1.1 KiB
Python
#!/usr/bin/env python3
|
|
"""Verify the scratch_analysis.json file is valid and contains expected data."""
|
|
import json
|
|
import sys
|
|
|
|
|
|
def _check(cond, msg="check failed"):
|
|
"""Explicit failure path -- survives `python3 -O`, where `assert` is compiled away."""
|
|
if not cond:
|
|
raise SystemExit(f"FAIL: {msg}")
|
|
|
|
|
|
with open("/root/.hermes/wizard-outputs/spark/scratch_analysis.json") as f:
|
|
data = json.load(f)
|
|
|
|
# Verify required fields
|
|
_check("total_files" in data, "Missing total_files")
|
|
_check("total_bytes" in data, "Missing total_bytes")
|
|
_check("file_types" in data, "Missing file_types")
|
|
_check("files" in data, "Missing files array")
|
|
|
|
# Verify counts match
|
|
_check(data["total_files"] == len(data["files"]), "File count mismatch")
|
|
_check(data["total_files"] == 165, f"Expected 165 files, got {data['total_files']}")
|
|
_check(230000 <= data["total_bytes"] <= 250000, f"Total bytes out of range: {data['total_bytes']}")
|
|
|
|
print("VERIFICATION PASSED")
|
|
print(f"Total files: {data['total_files']}")
|
|
print(f"Total bytes: {data['total_bytes']}")
|
|
print(f"File types: {data['file_types']}") |