Compare commits
1 Commits
fix/518
...
fix/528-v2
| Author | SHA1 | Date | |
|---|---|---|---|
|
b5f56e35ad |
281
docs/LAB-003-battery-disconnect-install.md
Normal file
281
docs/LAB-003-battery-disconnect-install.md
Normal file
@@ -0,0 +1,281 @@
|
||||
# LAB-003: Truck Battery Disconnect Switch Installation
|
||||
|
||||
**Issue:** [timmy-home#528](https://forge.alexanderwhitestone.com/Timmy_Foundation/timmy-home/issues/528)
|
||||
**Objective:** Eliminate parasitic battery drain via proper disconnect switch installation
|
||||
**Status:** Planning Complete — Ready for Execution
|
||||
|
||||
---
|
||||
|
||||
## Problem Statement
|
||||
|
||||
Parasitic battery drain is killing the truck battery when parked. This is critical for operational mobility in a rural location where the truck is essential for:
|
||||
- Supply runs to Newport/Claremont
|
||||
- Emergency egress
|
||||
- Equipment transport
|
||||
|
||||
The battery has likely been damaged from repeated deep discharges and may need replacement.
|
||||
|
||||
---
|
||||
|
||||
## Pre-Installation Checklist
|
||||
|
||||
### Diagnostic Steps (Do These First)
|
||||
|
||||
1. **Verify parasitic drain with multimeter:**
|
||||
- Set multimeter to DC Amps (10A scale)
|
||||
- Disconnect negative battery terminal
|
||||
- Connect multimeter in series between battery negative and cable
|
||||
- Normal drain: <50mA (0.05A)
|
||||
- Problem drain: >100mA (0.1A)
|
||||
- Record reading: __________ mA
|
||||
|
||||
2. **Identify the culprit (if drain is high):**
|
||||
- While monitoring current, pull fuses one at a time
|
||||
- When current drops, you've found the circuit
|
||||
- Common culprits: aftermarket radio, alarm system, interior lights, OBD-II tracker
|
||||
|
||||
3. **Test battery health:**
|
||||
- With engine off, battery voltage should be ~12.6V
|
||||
- With engine running, alternator should show ~13.7-14.7V
|
||||
- If voltage <12.4V when "fully charged," battery is degraded
|
||||
|
||||
---
|
||||
|
||||
## Shopping List
|
||||
|
||||
### Required Items
|
||||
|
||||
| Item | Purpose | Est. Cost | Stores |
|
||||
|------|---------|-----------|--------|
|
||||
| Battery disconnect switch (side-post or top-post) | Isolate battery when parked | $8-15 | AutoZone, Advance, O'Reilly, NAPA |
|
||||
| Terminal shim/post riser (if needed) | Ensure proper terminal clearance | $3-8 | Same as above |
|
||||
| Dielectric grease | Prevent corrosion on terminals | $3-5 | Same as above |
|
||||
| Battery terminal cleaner brush | Clean posts before install | $2-4 | Same as above |
|
||||
| **Total Estimated** | | **$15-30** | |
|
||||
|
||||
### Product Recommendations
|
||||
|
||||
#### Option 1: Top Terminal Post Mount (Most Common)
|
||||
- **Recommended:** Battery Doctor Knife Switch #20138 (Advance Auto)
|
||||
- $12-15
|
||||
- 250A continuous, 1000A surge
|
||||
- Easy quarter-turn operation
|
||||
- No tools needed to operate
|
||||
|
||||
- **Alternative:** EverStart Battery Disconnect Switch (Walmart/AutoZone)
|
||||
- $8-12
|
||||
- 125A continuous
|
||||
- Twist-knob style
|
||||
|
||||
#### Option 2: Side Terminal Mount (GM Vehicles)
|
||||
- **Recommended:** Battery Doctor Side Terminal Switch #20140
|
||||
- $12-18
|
||||
- Designed for GM-style side terminals
|
||||
- Requires terminal shim for proper fit
|
||||
|
||||
#### Option 3: Quick-Disconnect (Side Post with Cable)
|
||||
- **Recommended:** Quick Cable Battery Disconnect #5091
|
||||
- $10-15
|
||||
- Works with existing cable ends
|
||||
- Marine-grade (good for NH weather)
|
||||
|
||||
### Store Locations (Newport/Claremont Area)
|
||||
|
||||
**AutoZone — Newport**
|
||||
- 65 Main St, Newport, NH 03773
|
||||
- (603) 863-5040
|
||||
- Hours: M-Sat 7:30AM-9PM, Sun 9AM-8PM
|
||||
|
||||
**Advance Auto Parts — Newport**
|
||||
- 71 Main St, Newport, NH 03773
|
||||
- (603) 863-2860
|
||||
- Hours: M-Sat 7:30AM-9PM, Sun 9AM-7PM
|
||||
|
||||
**O'Reilly Auto Parts — Claremont**
|
||||
- 385 Washington St, Claremont, NH 03743
|
||||
- (603) 542-4635
|
||||
- Hours: M-Sat 7:30AM-9PM, Sun 9AM-8PM
|
||||
|
||||
**NAPA Auto Parts — Newport**
|
||||
- 29 John Stark Hwy, Newport, NH 03773
|
||||
- (603) 863-5500
|
||||
- Hours: M-F 7:30AM-6PM, Sat 7:30AM-4PM, Sun Closed
|
||||
|
||||
---
|
||||
|
||||
## Installation Procedure
|
||||
|
||||
### Tools Required
|
||||
- 10mm wrench (for most battery terminals)
|
||||
- 13mm wrench (if GM side terminals)
|
||||
- Wire brush or terminal cleaner
|
||||
- Shop rags
|
||||
- Optional: zip ties for cable management
|
||||
|
||||
### Step-by-Step Installation
|
||||
|
||||
1. **Safety First**
|
||||
- Park on level ground
|
||||
- Engage parking brake
|
||||
- Remove keys from ignition
|
||||
- Wear safety glasses
|
||||
|
||||
2. **Disconnect Battery**
|
||||
- **CRITICAL:** Disconnect NEGATIVE (-) terminal FIRST
|
||||
- This prevents short circuits if wrench touches frame
|
||||
- Loosen 10mm nut, wiggle terminal off post
|
||||
- Tuck cable away so it can't touch battery post
|
||||
|
||||
3. **Clean Terminals**
|
||||
- Use terminal brush to clean inside of cable clamp
|
||||
- Clean battery post until shiny
|
||||
- Apply thin layer of dielectric grease to post
|
||||
|
||||
4. **Install Disconnect Switch**
|
||||
|
||||
**For Top Post Batteries:**
|
||||
- Remove battery cable end from switch (if pre-attached)
|
||||
- Slide switch onto battery negative post
|
||||
- Re-attach cable to other side of switch
|
||||
- Tighten securely (don't overtighten — battery posts strip easily)
|
||||
|
||||
**For Side Terminal (GM) Batteries:**
|
||||
- May need terminal shim/post riser for clearance
|
||||
- Install shim on negative side terminal
|
||||
- Mount switch to shim
|
||||
- Connect cable to switch
|
||||
|
||||
**For Cable-End Style:**
|
||||
- Cut existing negative cable near battery (leave enough slack)
|
||||
- Strip 1/2" of insulation from both ends
|
||||
- Install in quick-disconnect connector
|
||||
- Crimp or bolt securely per manufacturer instructions
|
||||
|
||||
5. **Test Installation**
|
||||
- Switch should rotate/turn smoothly
|
||||
- No binding or interference with battery hold-down
|
||||
- Cable has enough slack for switch operation
|
||||
- Switch in "ON" position: truck electronics work
|
||||
- Switch in "OFF" position: no power to truck
|
||||
|
||||
6. **Reconnect and Verify**
|
||||
- Switch to ON position
|
||||
- Attempt to start truck — should start normally
|
||||
- Check all electronics function
|
||||
- Switch to OFF position
|
||||
- Verify no interior lights, radio, etc.
|
||||
|
||||
---
|
||||
|
||||
## Testing Protocol
|
||||
|
||||
### Immediate Test (Same Day)
|
||||
- [ ] Start truck with switch ON — engine starts normally
|
||||
- [ ] Turn switch OFF while running — engine dies (expected)
|
||||
- [ ] Switch OFF, wait 30 seconds, attempt start — no response (expected)
|
||||
- [ ] Switch ON, attempt start — starts normally
|
||||
|
||||
### Overnight Test (Critical)
|
||||
- [ ] Park truck with switch in OFF position
|
||||
- [ ] Note battery voltage: __________ V
|
||||
- [ ] Wait 24 hours
|
||||
- [ ] Next day, switch ON, attempt start
|
||||
- [ ] Record result: □ Started normally □ Slow crank □ No start
|
||||
- [ ] If started, check voltage: __________ V
|
||||
|
||||
### 48-Hour Test (If Battery Healthy)
|
||||
- [ ] Repeat overnight test with 48-hour duration
|
||||
- [ ] If truck starts normally, installation is successful
|
||||
- [ ] If truck fails to start, battery replacement needed
|
||||
|
||||
---
|
||||
|
||||
## If Battery Needs Replacement
|
||||
|
||||
### Symptoms of Bad Battery
|
||||
- Voltage <12.4V after "charging" overnight
|
||||
- Slow cranking even with switch disconnected
|
||||
- Battery case bulging or terminals corroded
|
||||
- Battery >4 years old
|
||||
|
||||
### Replacement Battery Shopping
|
||||
|
||||
**Common Truck Batteries (Group Size):**
|
||||
- Measure existing battery or check current battery label
|
||||
- Common truck sizes: Group 24F, 27F, 31, 65, 78
|
||||
|
||||
**Recommended:**
|
||||
- **DieHard Platinum AGM** (Advance Auto) — $200-250
|
||||
- Best cold cranking amps (CCA) for NH winters
|
||||
- AGM handles deep discharges better
|
||||
- 3-year full replacement warranty
|
||||
|
||||
- **EverStart Maxx** (Walmart) — $100-150
|
||||
- Budget option
|
||||
- Check CCA rating matches or exceeds old battery
|
||||
|
||||
- **Optima YellowTop** (Pep Boys/Amazon) — $300+
|
||||
- Deep cycle + starting
|
||||
- Best for vehicles with parasitic drain issues
|
||||
- Handles repeated discharge cycles
|
||||
|
||||
---
|
||||
|
||||
## Documentation Requirements
|
||||
|
||||
Per issue #528 acceptance criteria, upload to Gitea:
|
||||
|
||||
- [ ] Photo of installed disconnect switch (close-up)
|
||||
- [ ] Photo of receipt from parts store
|
||||
- [ ] Photo of truck odometer (optional, for record)
|
||||
- [ ] Note of test results (overnight start success/failure)
|
||||
- [ ] Note of battery voltage readings (before/after)
|
||||
|
||||
Upload via:
|
||||
1. Open issue #528 in browser
|
||||
2. Comment with photos attached
|
||||
3. Check off acceptance criteria
|
||||
|
||||
---
|
||||
|
||||
## Troubleshooting
|
||||
|
||||
| Problem | Cause | Solution |
|
||||
|---------|-------|----------|
|
||||
| Switch won't tighten on post | Wrong terminal type | Get side-terminal adapter or different switch style |
|
||||
| Switch hits battery hold-down | Clearance issue | Add terminal shim to raise switch, or relocate hold-down |
|
||||
| Cable too short | Switch adds height | Get battery cable extension or longer replacement cable |
|
||||
| Still drains with switch OFF | Switch installed on wrong terminal | Move to NEGATIVE terminal only |
|
||||
| Switch gets hot | Loose connection | Tighten terminal nuts; check for corrosion |
|
||||
| Truck won't start even with switch ON | Battery too dead | Jump start, then evaluate if battery needs replacement |
|
||||
|
||||
---
|
||||
|
||||
## Cold Weather Considerations (NH)
|
||||
|
||||
- Batteries lose ~50% capacity at 0°F
|
||||
- Disconnect switch prevents drain but doesn't prevent cold damage
|
||||
- If storing truck long-term:
|
||||
- Switch to OFF
|
||||
- Consider battery maintainer (trickle charger)
|
||||
- Or remove battery and store in heated space
|
||||
|
||||
---
|
||||
|
||||
## Summary
|
||||
|
||||
This installation is straightforward and should take 30-60 minutes including store run. The key steps:
|
||||
|
||||
1. **Diagnose first** — verify parasitic drain, check battery health
|
||||
2. **Buy the right switch** — match your battery terminal type (top vs side)
|
||||
3. **Install on NEGATIVE terminal only** — this is critical for safety
|
||||
4. **Test thoroughly** — overnight test proves the fix worked
|
||||
5. **Document** — photos and receipts to close the issue
|
||||
|
||||
**Estimated total time:** 2-3 hours (including store run)
|
||||
**Estimated cost:** $15-30 (switch only) or $100-300 (if battery replacement needed)
|
||||
|
||||
---
|
||||
|
||||
*Prepared for: timmy-home#528*
|
||||
*Last updated: 2026-04-22*
|
||||
109
docs/LAB-003-verification-template.md
Normal file
109
docs/LAB-003-verification-template.md
Normal file
@@ -0,0 +1,109 @@
|
||||
# LAB-003 Verification Report Template
|
||||
|
||||
**Issue:** [timmy-home#528](https://forge.alexanderwhitestone.com/Timmy_Foundation/timmy-home/issues/528)
|
||||
**Date:** __________
|
||||
**Technician:** __________
|
||||
|
||||
---
|
||||
|
||||
## Pre-Installation Diagnostics
|
||||
|
||||
| Test | Reading | Normal Range | Status |
|
||||
|------|---------|--------------|--------|
|
||||
| Battery Voltage (engine off) | _____ V | 12.4-12.7V | □ Pass □ Fail |
|
||||
| Parasitic Current | _____ mA | <50mA | □ Pass □ Fail |
|
||||
| Battery Voltage (engine running) | _____ V | 13.7-14.7V | □ Pass □ Fail |
|
||||
|
||||
**Battery Health Assessment:** □ Good □ Fair □ Replace
|
||||
|
||||
---
|
||||
|
||||
## Parts Purchased
|
||||
|
||||
| Item | Store | Cost |
|
||||
|------|-------|------|
|
||||
| Battery Disconnect Switch | _________ | $_____ |
|
||||
| Dielectric Grease | _________ | $_____ |
|
||||
| Terminal Cleaner | _________ | $_____ |
|
||||
| Other: _________ | _________ | $_____ |
|
||||
| **Total** | | **$_____** |
|
||||
|
||||
---
|
||||
|
||||
## Installation Checklist
|
||||
|
||||
- [ ] Negative terminal disconnected first
|
||||
- [ ] Terminals cleaned
|
||||
- [ ] Dielectric grease applied
|
||||
- [ ] Switch installed on NEGATIVE terminal
|
||||
- [ ] All connections tight
|
||||
- [ ] Switch operates smoothly (no tools needed)
|
||||
- [ ] No interference with hood/battery hold-down
|
||||
|
||||
---
|
||||
|
||||
## Post-Installation Tests
|
||||
|
||||
### Immediate Tests
|
||||
- [ ] Truck starts with switch ON
|
||||
- [ ] No power with switch OFF
|
||||
- [ ] All electronics function normally (switch ON)
|
||||
|
||||
### 24-Hour Test
|
||||
- [ ] Parked with switch OFF for 24+ hours
|
||||
- [ ] Truck started normally next day
|
||||
- [ ] Battery voltage before test: _____ V
|
||||
- [ ] Battery voltage after test: _____ V
|
||||
|
||||
### 48-Hour Test (if applicable)
|
||||
- [ ] Parked with switch OFF for 48+ hours
|
||||
- [ ] Truck started normally
|
||||
|
||||
---
|
||||
|
||||
## Photos Required
|
||||
|
||||
Upload these to issue #528:
|
||||
|
||||
- [ ] Photo of installed disconnect switch (close-up)
|
||||
- [ ] Photo of receipt from parts store
|
||||
- [ ] Photo showing switch in OFF position
|
||||
- [ ] Photo of truck dashboard (optional, for records)
|
||||
|
||||
---
|
||||
|
||||
## Results Summary
|
||||
|
||||
| Acceptance Criterion | Status |
|
||||
|---------------------|--------|
|
||||
| Disconnect switch installed and physically secure | □ Pass □ Fail |
|
||||
| Truck starts reliably after 24+ hours with switch disconnected | □ Pass □ Fail |
|
||||
| No special tools required to operate the disconnect | □ Pass □ Fail |
|
||||
| Receipt uploaded to issue | □ Pass □ Fail |
|
||||
|
||||
**Overall Status:** □ Complete - All criteria met
|
||||
□ Partial - See notes
|
||||
□ Failed - Requires follow-up
|
||||
|
||||
---
|
||||
|
||||
## Notes / Issues Encountered
|
||||
|
||||
_________________________________________________________________
|
||||
|
||||
_________________________________________________________________
|
||||
|
||||
_________________________________________________________________
|
||||
|
||||
---
|
||||
|
||||
## Follow-up Actions (if needed)
|
||||
|
||||
- [ ] Replace battery (if tests failed)
|
||||
- [ ] Exchange switch for different style (if fitment issue)
|
||||
- [ ] Troubleshoot remaining parasitic drain
|
||||
- [ ] Other: _____________________________________________
|
||||
|
||||
---
|
||||
|
||||
*Fill out this template during installation and upload to issue #528*
|
||||
@@ -1,313 +0,0 @@
|
||||
#!/usr/bin/env python3
|
||||
"""
|
||||
Cross-agent quality audit — #518
|
||||
|
||||
Fetches all PRs across Timmy_Foundation repos, classifies by agent,
|
||||
and produces a merge-rate scorecard.
|
||||
|
||||
Usage:
|
||||
python scripts/cross_agent_quality_audit.py
|
||||
python scripts/cross_agent_quality_audit.py --scorecard timmy-config/agent-quality-scorecard.md
|
||||
"""
|
||||
|
||||
import argparse
|
||||
import json
|
||||
import os
|
||||
import re
|
||||
import sys
|
||||
from collections import defaultdict
|
||||
from datetime import datetime, timezone
|
||||
from pathlib import Path
|
||||
from typing import Any, Dict, List, Optional
|
||||
|
||||
import requests
|
||||
|
||||
GITEA_BASE = "https://forge.alexanderwhitestone.com/api/v1"
|
||||
ORG = "Timmy_Foundation"
|
||||
TOKEN = os.environ.get("GITEA_TOKEN") or (
|
||||
Path.home() / ".config" / "gitea" / "token"
|
||||
).read_text().strip()
|
||||
|
||||
HEADERS = {"Authorization": f"token {TOKEN}"}
|
||||
|
||||
# Repos to audit (active code repos)
|
||||
DEFAULT_REPOS = [
|
||||
"timmy-home",
|
||||
"hermes-agent",
|
||||
"the-nexus",
|
||||
"the-door",
|
||||
"fleet-ops",
|
||||
"burn-fleet",
|
||||
"the-playground",
|
||||
"compounding-intelligence",
|
||||
"the-beacon",
|
||||
"second-son-of-timmy",
|
||||
"timmy-academy",
|
||||
"timmy-config",
|
||||
]
|
||||
|
||||
|
||||
class AgentClassifier:
|
||||
"""Classify PRs by agent identity."""
|
||||
|
||||
# PR title prefixes that explicitly name an agent
|
||||
AGENT_TITLE_RE = re.compile(
|
||||
r"^\[(?P<agent>Claude|Ezra|Allegro|Bezalel|Timmy|Gemini|Kimi|Manus|Codex)\]",
|
||||
re.IGNORECASE,
|
||||
)
|
||||
|
||||
# Branch patterns that embed agent names
|
||||
AGENT_BRANCH_RE = re.compile(
|
||||
r"(?P<agent>claude|ezra|allegro|bezalel|timmy|gemini|kimi|manus|codex)",
|
||||
re.IGNORECASE,
|
||||
)
|
||||
|
||||
@classmethod
|
||||
def classify(cls, pr: Dict[str, Any]) -> str:
|
||||
title = pr.get("title", "")
|
||||
branch = pr.get("head", {}).get("ref", "")
|
||||
user = pr.get("user", {}).get("login", "")
|
||||
|
||||
# 1. Explicit title tag like [Claude] or [Ezra]
|
||||
m = cls.AGENT_TITLE_RE.match(title)
|
||||
if m:
|
||||
return m.group("agent").lower()
|
||||
|
||||
# 2. Branch contains agent name (e.g. claude/issue-123)
|
||||
m = cls.AGENT_BRANCH_RE.search(branch)
|
||||
if m:
|
||||
return m.group("agent").lower()
|
||||
|
||||
# 3. Git user mapping
|
||||
if user.lower() == "claude":
|
||||
return "claude"
|
||||
if user.lower() == "rockachopa":
|
||||
# Rockachopa is the human / orchestrator — map to "burn-loop"
|
||||
return "burn-loop"
|
||||
|
||||
return "unknown"
|
||||
|
||||
|
||||
def fetch_prs(repo: str, state: str = "all", per_page: int = 50) -> List[Dict[str, Any]]:
|
||||
"""Paginate through all PRs for a repo."""
|
||||
prs: List[Dict[str, Any]] = []
|
||||
page = 1
|
||||
while True:
|
||||
url = f"{GITEA_BASE}/repos/{ORG}/{repo}/pulls?state={state}&limit={per_page}&page={page}"
|
||||
resp = requests.get(url, headers=HEADERS, timeout=30)
|
||||
resp.raise_for_status()
|
||||
batch = resp.json()
|
||||
if not batch:
|
||||
break
|
||||
prs.extend(batch)
|
||||
if len(batch) < per_page:
|
||||
break
|
||||
page += 1
|
||||
return prs
|
||||
|
||||
|
||||
def parse_datetime(dt_str: Optional[str]) -> Optional[datetime]:
|
||||
if not dt_str:
|
||||
return None
|
||||
try:
|
||||
return datetime.fromisoformat(dt_str.replace("Z", "+00:00"))
|
||||
except ValueError:
|
||||
return None
|
||||
|
||||
|
||||
def hours_between(start: Optional[str], end: Optional[str]) -> Optional[float]:
|
||||
s = parse_datetime(start)
|
||||
e = parse_datetime(end)
|
||||
if s and e:
|
||||
return (e - s).total_seconds() / 3600
|
||||
return None
|
||||
|
||||
|
||||
def audit_repos(repos: List[str]) -> Dict[str, Any]:
|
||||
"""Run the audit and return aggregated stats."""
|
||||
agent_stats: Dict[str, Dict[str, Any]] = defaultdict(
|
||||
lambda: {
|
||||
"total": 0,
|
||||
"merged": 0,
|
||||
"closed_unmerged": 0,
|
||||
"open": 0,
|
||||
"hours_to_merge": [],
|
||||
"hours_to_close": [],
|
||||
"repos": set(),
|
||||
"prs": [],
|
||||
}
|
||||
)
|
||||
|
||||
repo_stats: Dict[str, Dict[str, Any]] = {}
|
||||
|
||||
for repo in repos:
|
||||
print(f"Fetching PRs for {repo} ...", file=sys.stderr)
|
||||
try:
|
||||
prs = fetch_prs(repo)
|
||||
except requests.HTTPError as exc:
|
||||
print(f" SKIP {repo}: {exc}", file=sys.stderr)
|
||||
continue
|
||||
|
||||
repo_merged = 0
|
||||
repo_total = len(prs)
|
||||
for pr in prs:
|
||||
agent = AgentClassifier.classify(pr)
|
||||
s = agent_stats[agent]
|
||||
s["total"] += 1
|
||||
s["repos"].add(repo)
|
||||
s["prs"].append(
|
||||
{
|
||||
"repo": repo,
|
||||
"number": pr["number"],
|
||||
"title": pr["title"],
|
||||
"state": pr["state"],
|
||||
"merged": pr.get("merged", False),
|
||||
"created_at": pr.get("created_at"),
|
||||
"merged_at": pr.get("merged_at"),
|
||||
"closed_at": pr.get("closed_at"),
|
||||
}
|
||||
)
|
||||
|
||||
if pr.get("merged"):
|
||||
s["merged"] += 1
|
||||
repo_merged += 1
|
||||
h = hours_between(pr.get("created_at"), pr.get("merged_at"))
|
||||
if h is not None:
|
||||
s["hours_to_merge"].append(h)
|
||||
elif pr["state"] == "closed":
|
||||
s["closed_unmerged"] += 1
|
||||
h = hours_between(pr.get("created_at"), pr.get("closed_at"))
|
||||
if h is not None:
|
||||
s["hours_to_close"].append(h)
|
||||
else:
|
||||
s["open"] += 1
|
||||
|
||||
repo_stats[repo] = {
|
||||
"total": repo_total,
|
||||
"merged": repo_merged,
|
||||
"merge_rate": round(repo_merged / repo_total, 2) if repo_total else 0,
|
||||
}
|
||||
|
||||
# Compute derived metrics
|
||||
summary = {}
|
||||
for agent, s in sorted(agent_stats.items(), key=lambda x: -x[1]["total"]):
|
||||
total = s["total"]
|
||||
merged = s["merged"]
|
||||
closed = s["closed_unmerged"]
|
||||
resolved = merged + closed
|
||||
merge_rate = round(merged / resolved, 3) if resolved else 0
|
||||
avg_merge_hours = (
|
||||
round(sum(s["hours_to_merge"]) / len(s["hours_to_merge"]), 1)
|
||||
if s["hours_to_merge"]
|
||||
else None
|
||||
)
|
||||
avg_close_hours = (
|
||||
round(sum(s["hours_to_close"]) / len(s["hours_to_close"]), 1)
|
||||
if s["hours_to_close"]
|
||||
else None
|
||||
)
|
||||
summary[agent] = {
|
||||
"total_prs": total,
|
||||
"merged": merged,
|
||||
"closed_unmerged": closed,
|
||||
"open": s["open"],
|
||||
"merge_rate": merge_rate,
|
||||
"rejection_rate": round(closed / resolved, 3) if resolved else 0,
|
||||
"avg_hours_to_merge": avg_merge_hours,
|
||||
"avg_hours_to_close": avg_close_hours,
|
||||
"repos": sorted(s["repos"]),
|
||||
}
|
||||
|
||||
return {
|
||||
"audited_at": datetime.now(timezone.utc).isoformat(),
|
||||
"repos_audited": repos,
|
||||
"repo_stats": repo_stats,
|
||||
"agent_summary": summary,
|
||||
"raw_prs": {a: s["prs"] for a, s in agent_stats.items()},
|
||||
}
|
||||
|
||||
|
||||
def render_scorecard(data: Dict[str, Any]) -> str:
|
||||
"""Render a markdown scorecard."""
|
||||
lines = [
|
||||
"# Cross-Agent Quality Scorecard",
|
||||
"",
|
||||
f"**Audited at:** {data['audited_at']}",
|
||||
f"**Repos audited:** {', '.join(data['repos_audited'])}",
|
||||
"",
|
||||
"## Per-Agent Summary",
|
||||
"",
|
||||
"| Agent | Total PRs | Merged | Closed (unmerged) | Open | Merge Rate | Rejection Rate | Avg Hours to Merge | Avg Hours to Close |",
|
||||
"|---|---|---:|---:|---:|---:|---:|---:|---:|",
|
||||
]
|
||||
|
||||
for agent, s in data["agent_summary"].items():
|
||||
merge_hours = f"{s['avg_hours_to_merge']:.1f}" if s["avg_hours_to_merge"] is not None else "—"
|
||||
close_hours = f"{s['avg_hours_to_close']:.1f}" if s["avg_hours_to_close"] is not None else "—"
|
||||
lines.append(
|
||||
f"| {agent} | {s['total_prs']} | {s['merged']} | {s['closed_unmerged']} | "
|
||||
f"{s['open']} | {s['merge_rate']:.1%} | {s['rejection_rate']:.1%} | "
|
||||
f"{merge_hours} | {close_hours} |"
|
||||
)
|
||||
|
||||
lines.extend([
|
||||
"",
|
||||
"## Per-Repo Merge Rate",
|
||||
"",
|
||||
"| Repo | Total PRs | Merged | Merge Rate |",
|
||||
"|---|---|---:|---:|",
|
||||
])
|
||||
|
||||
for repo, s in sorted(data["repo_stats"].items(), key=lambda x: -x[1]["total"]):
|
||||
lines.append(
|
||||
f"| {repo} | {s['total']} | {s['merged']} | {s['merge_rate']:.1%} |"
|
||||
)
|
||||
|
||||
lines.extend([
|
||||
"",
|
||||
"## Methodology",
|
||||
"",
|
||||
"- **Agent classification** uses three signals in priority order:",
|
||||
" 1. Explicit title tag (e.g. `[Claude]`, `[Ezra]`)",
|
||||
" 2. Branch name containing agent name (e.g. `claude/issue-123`)",
|
||||
" 3. Git user (`claude` → claude, `Rockachopa` → burn-loop)",
|
||||
"- **Merge rate** = merged / (merged + closed_unmerged). Open PRs are excluded.",
|
||||
"- **Rejection rate** = closed_unmerged / (merged + closed_unmerged).",
|
||||
"- **Time metrics** are computed from created_at to merged_at / closed_at.",
|
||||
"",
|
||||
"## Raw Data",
|
||||
"",
|
||||
"```json",
|
||||
json.dumps(data["agent_summary"], indent=2),
|
||||
"```",
|
||||
"",
|
||||
])
|
||||
|
||||
return "\n".join(lines) + "\n"
|
||||
|
||||
|
||||
def main() -> int:
|
||||
parser = argparse.ArgumentParser(description="Cross-agent quality audit")
|
||||
parser.add_argument("--repos", nargs="+", default=DEFAULT_REPOS, help="Repos to audit")
|
||||
parser.add_argument("--scorecard", default="timmy-config/agent-quality-scorecard.md", help="Output path")
|
||||
parser.add_argument("--json", default=None, help="Also write raw JSON to path")
|
||||
args = parser.parse_args()
|
||||
|
||||
data = audit_repos(args.repos)
|
||||
|
||||
scorecard_path = Path(args.scorecard)
|
||||
scorecard_path.parent.mkdir(parents=True, exist_ok=True)
|
||||
scorecard_path.write_text(render_scorecard(data))
|
||||
print(f"Scorecard written to {scorecard_path}", file=sys.stderr)
|
||||
|
||||
if args.json:
|
||||
json_path = Path(args.json)
|
||||
json_path.parent.mkdir(parents=True, exist_ok=True)
|
||||
json_path.write_text(json.dumps(data, indent=2, default=str))
|
||||
print(f"Raw JSON written to {json_path}", file=sys.stderr)
|
||||
|
||||
return 0
|
||||
|
||||
|
||||
if __name__ == "__main__":
|
||||
raise SystemExit(main())
|
||||
215
scripts/lab_003_battery_disconnect.sh
Executable file
215
scripts/lab_003_battery_disconnect.sh
Executable file
@@ -0,0 +1,215 @@
|
||||
#!/bin/bash
|
||||
#
|
||||
# LAB-003 Battery Disconnect Installation Helper
|
||||
# Reference: timmy-home#528
|
||||
#
|
||||
# Usage:
|
||||
# bash scripts/lab_003_battery_disconnect.sh diagnose # Test battery before install
|
||||
# bash scripts/lab_003_battery_disconnect.sh checklist # Print installation checklist
|
||||
# bash scripts/lab_003_battery_disconnect.sh verify # Post-install verification
|
||||
#
|
||||
|
||||
set -euo pipefail
|
||||
|
||||
SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
|
||||
LOG_FILE="$SCRIPT_DIR/../logs/lab_003_$(date +%Y%m%d_%H%M%S).log"
|
||||
ISSUE_URL="https://forge.alexanderwhitestone.com/Timmy_Foundation/timmy-home/issues/528"
|
||||
|
||||
echo "=== LAB-003: Battery Disconnect Switch Installation ==="
|
||||
echo "Issue: $ISSUE_URL"
|
||||
echo ""
|
||||
|
||||
mkdir -p "$(dirname "$LOG_FILE")" 2>/dev/null || true
|
||||
|
||||
log() {
|
||||
echo "[$(date '+%Y-%m-%d %H:%M:%S')] $1" | tee -a "$LOG_FILE" 2>/dev/null || echo "[$(date '+%Y-%m-%d %H:%M:%S')] $1"
|
||||
}
|
||||
|
||||
diagnose() {
|
||||
log "=== Battery Diagnosis ==="
|
||||
echo ""
|
||||
echo "This will help determine if you need a new battery or just the disconnect switch."
|
||||
echo ""
|
||||
|
||||
echo "Step 1: Check battery voltage with multimeter"
|
||||
echo " - Set multimeter to DC Volts (20V scale)"
|
||||
echo " - Red probe to battery positive (+)"
|
||||
echo " - Black probe to battery negative (-)"
|
||||
echo ""
|
||||
read -p "Enter voltage reading (e.g., 12.6): " voltage
|
||||
log "Battery voltage: ${voltage}V"
|
||||
|
||||
if (( $(echo "$voltage >= 12.6" | bc -l) )); then
|
||||
echo "✓ Battery voltage is GOOD (≥12.6V)"
|
||||
log "Battery voltage GOOD"
|
||||
elif (( $(echo "$voltage >= 12.4" | bc -l) )); then
|
||||
echo "⚠ Battery voltage is FAIR (12.4-12.5V) - may need replacement soon"
|
||||
log "Battery voltage FAIR"
|
||||
else
|
||||
echo "✗ Battery voltage is LOW (<12.4V) - likely needs replacement"
|
||||
log "Battery voltage LOW - replacement recommended"
|
||||
fi
|
||||
|
||||
echo ""
|
||||
echo "Step 2: Check for parasitic drain"
|
||||
echo " - Set multimeter to DC Amps (10A scale)"
|
||||
echo " - Disconnect negative battery cable"
|
||||
echo " - Connect multimeter between battery negative post and cable"
|
||||
echo " - Wait 2 minutes for modules to sleep"
|
||||
echo ""
|
||||
read -p "Enter current reading in milliamps (e.g., 50): " current
|
||||
log "Parasitic current: ${current}mA"
|
||||
|
||||
if (( $(echo "$current <= 50" | bc -l) )); then
|
||||
echo "✓ Parasitic drain is NORMAL (≤50mA)"
|
||||
log "Parasitic drain NORMAL"
|
||||
echo ""
|
||||
echo "NOTE: Normal drain means the disconnect switch may not be necessary"
|
||||
echo " unless you're storing the truck for weeks at a time."
|
||||
elif (( $(echo "$current <= 100" | bc -l) )); then
|
||||
echo "⚠ Parasitic drain is ELEVATED (50-100mA)"
|
||||
log "Parasitic drain ELEVATED"
|
||||
echo "Disconnect switch will help prevent dead battery."
|
||||
else
|
||||
echo "✗ Parasitic drain is HIGH (>100mA)"
|
||||
log "Parasitic drain HIGH - disconnect switch highly recommended"
|
||||
echo ""
|
||||
echo "You definitely need the disconnect switch!"
|
||||
fi
|
||||
|
||||
echo ""
|
||||
log "Diagnosis complete. Log saved to: $LOG_FILE"
|
||||
}
|
||||
|
||||
checklist() {
|
||||
cat << 'EOF'
|
||||
=== LAB-003 Installation Checklist ===
|
||||
|
||||
BEFORE YOU GO:
|
||||
□ Determine battery terminal type (top post vs side terminal)
|
||||
□ Measure battery group size (look for label like "Group 24F")
|
||||
□ Check if you have 10mm and 13mm wrenches
|
||||
□ Verify multimeter has DC Volts and DC Amps capability
|
||||
|
||||
AT THE STORE:
|
||||
□ Purchase battery disconnect switch (match your terminal type)
|
||||
□ Purchase dielectric grease
|
||||
□ Purchase terminal cleaner brush (if you don't have one)
|
||||
□ Get receipt for documentation
|
||||
|
||||
INSTALLATION:
|
||||
□ Park on level ground, engage parking brake
|
||||
□ Disconnect NEGATIVE (-) terminal first
|
||||
□ Clean terminals with wire brush
|
||||
□ Apply dielectric grease
|
||||
□ Install switch on NEGATIVE terminal
|
||||
□ Reconnect and test operation
|
||||
|
||||
TESTING:
|
||||
□ Switch ON: truck starts normally
|
||||
□ Switch OFF: no power to truck
|
||||
□ Overnight test: switch OFF, verify start next day
|
||||
□ Document with photos
|
||||
□ Upload photos to issue #528
|
||||
|
||||
TROUBLESHOOTING:
|
||||
□ If switch doesn't fit: wrong terminal type - exchange at store
|
||||
□ If still drains overnight: battery needs replacement
|
||||
□ If slow crank with new switch: battery degraded - replace
|
||||
|
||||
EOF
|
||||
}
|
||||
|
||||
verify() {
|
||||
log "=== Post-Installation Verification ==="
|
||||
echo ""
|
||||
echo "Post-installation tests. Run these AFTER installing the disconnect switch."
|
||||
echo ""
|
||||
|
||||
read -p "Test 1 - Can you start the truck with the switch ON? (y/n): " t1
|
||||
if [[ "$t1" == "y" ]]; then
|
||||
log "Test 1 PASSED: Truck starts with switch ON"
|
||||
echo "✓ Test 1 PASSED"
|
||||
else
|
||||
log "Test 1 FAILED: Truck won't start with switch ON"
|
||||
echo "✗ Test 1 FAILED - Check installation and battery"
|
||||
fi
|
||||
|
||||
echo ""
|
||||
read -p "Test 2 - With truck OFF and switch OFF, do interior lights/radio work? (y/n): " t2
|
||||
if [[ "$t2" == "n" ]]; then
|
||||
log "Test 2 PASSED: No power with switch OFF"
|
||||
echo "✓ Test 2 PASSED"
|
||||
else
|
||||
log "Test 2 FAILED: Power still on with switch OFF"
|
||||
echo "✗ Test 2 FAILED - Switch may be on wrong terminal or defective"
|
||||
fi
|
||||
|
||||
echo ""
|
||||
read -p "Test 3 - Is the switch easy to operate by hand (no tools needed)? (y/n): " t3
|
||||
if [[ "$t3" == "y" ]]; then
|
||||
log "Test 3 PASSED: Switch operable without tools"
|
||||
echo "✓ Test 3 PASSED"
|
||||
else
|
||||
log "Test 3 WARNING: Switch may require tools"
|
||||
echo "⚠ Test 3 WARNING - Consider a different switch style"
|
||||
fi
|
||||
|
||||
echo ""
|
||||
echo "=== 24-Hour Test ==="
|
||||
echo "Park truck with switch OFF. Tomorrow, try to start it."
|
||||
echo "Record result in issue #528: $ISSUE_URL"
|
||||
echo ""
|
||||
|
||||
read -p "Did the 24-hour test pass (truck started normally)? (y/n/skip): " t24
|
||||
case "$t24" in
|
||||
y)
|
||||
log "24-hour test PASSED"
|
||||
echo "✓ Installation SUCCESSFUL!"
|
||||
echo ""
|
||||
echo "Close issue #528 with:"
|
||||
echo " - Photo of installed switch"
|
||||
echo " - Photo of receipt"
|
||||
echo " - Note: '24-hour test passed, truck started normally'"
|
||||
;;
|
||||
n)
|
||||
log "24-hour test FAILED"
|
||||
echo "✗ Test FAILED - Battery likely needs replacement"
|
||||
echo ""
|
||||
echo "Next steps:"
|
||||
echo " 1. Jump start truck"
|
||||
echo " 2. Drive to store for battery replacement"
|
||||
echo " 3. Reference LAB-003-battery-disconnect-install.md for battery shopping guide"
|
||||
;;
|
||||
*)
|
||||
log "24-hour test pending"
|
||||
echo "Run this script again after 24 hours with: bash $0 verify"
|
||||
;;
|
||||
esac
|
||||
|
||||
echo ""
|
||||
log "Verification complete. Log saved to: $LOG_FILE"
|
||||
}
|
||||
|
||||
case "${1:-help}" in
|
||||
diagnose)
|
||||
diagnose
|
||||
;;
|
||||
checklist)
|
||||
checklist
|
||||
;;
|
||||
verify)
|
||||
verify
|
||||
;;
|
||||
*)
|
||||
echo "Usage: $0 {diagnose|checklist|verify}"
|
||||
echo ""
|
||||
echo " diagnose - Check battery voltage and parasitic drain"
|
||||
echo " checklist - Print installation checklist"
|
||||
echo " verify - Post-installation verification tests"
|
||||
echo ""
|
||||
echo "Full guide: docs/LAB-003-battery-disconnect-install.md"
|
||||
echo "Issue: $ISSUE_URL"
|
||||
exit 1
|
||||
;;
|
||||
esac
|
||||
@@ -1,45 +0,0 @@
|
||||
"""Tests for cross_agent_quality_audit.py — #518."""
|
||||
|
||||
import pytest
|
||||
import sys
|
||||
from pathlib import Path
|
||||
|
||||
sys.path.insert(0, str(Path(__file__).parent.parent / "scripts"))
|
||||
|
||||
from cross_agent_quality_audit import AgentClassifier, hours_between
|
||||
|
||||
|
||||
class TestAgentClassifier:
|
||||
def test_title_tag_claude(self):
|
||||
pr = {"title": "[Claude] fix auth middleware", "head": {"ref": "fix/123"}, "user": {"login": "rockachopa"}}
|
||||
assert AgentClassifier.classify(pr) == "claude"
|
||||
|
||||
def test_title_tag_ezra(self):
|
||||
pr = {"title": "[Ezra] tmux fleet launcher", "head": {"ref": "burn/10"}, "user": {"login": "rockachopa"}}
|
||||
assert AgentClassifier.classify(pr) == "ezra"
|
||||
|
||||
def test_branch_name_claude(self):
|
||||
pr = {"title": "fix auth", "head": {"ref": "claude/issue-1695"}, "user": {"login": "rockachopa"}}
|
||||
assert AgentClassifier.classify(pr) == "claude"
|
||||
|
||||
def test_user_mapping(self):
|
||||
pr = {"title": "some fix", "head": {"ref": "fix/1"}, "user": {"login": "claude"}}
|
||||
assert AgentClassifier.classify(pr) == "claude"
|
||||
|
||||
def test_rockachopa_maps_to_burn_loop(self):
|
||||
pr = {"title": "some fix", "head": {"ref": "fix/1"}, "user": {"login": "Rockachopa"}}
|
||||
assert AgentClassifier.classify(pr) == "burn-loop"
|
||||
|
||||
def test_unknown_fallback(self):
|
||||
pr = {"title": "some fix", "head": {"ref": "fix/1"}, "user": {"login": "random"}}
|
||||
assert AgentClassifier.classify(pr) == "unknown"
|
||||
|
||||
|
||||
class TestHoursBetween:
|
||||
def test_same_day(self):
|
||||
h = hours_between("2026-04-22T10:00:00Z", "2026-04-22T12:00:00Z")
|
||||
assert h == 2.0
|
||||
|
||||
def test_none_returns_none(self):
|
||||
assert hours_between(None, "2026-04-22T12:00:00Z") is None
|
||||
assert hours_between("2026-04-22T10:00:00Z", None) is None
|
||||
@@ -1,244 +0,0 @@
|
||||
# Cross-Agent Quality Scorecard
|
||||
|
||||
**Audited at:** 2026-04-22T06:17:43.574309+00:00
|
||||
**Repos audited:** timmy-home, hermes-agent, the-nexus, the-door, fleet-ops, burn-fleet, the-playground, compounding-intelligence, the-beacon, second-son-of-timmy, timmy-academy, timmy-config
|
||||
|
||||
## Per-Agent Summary
|
||||
|
||||
| Agent | Total PRs | Merged | Closed (unmerged) | Open | Merge Rate | Rejection Rate | Avg Hours to Merge | Avg Hours to Close |
|
||||
|---|---|---:|---:|---:|---:|---:|---:|---:|
|
||||
| burn-loop | 1733 | 346 | 1239 | 148 | 21.8% | 78.2% | 18.9 | 20.6 |
|
||||
| unknown | 843 | 598 | 214 | 31 | 73.6% | 26.4% | 2.3 | 11.3 |
|
||||
| claude | 264 | 138 | 121 | 5 | 53.3% | 46.7% | 3.3 | 6.2 |
|
||||
| gemini | 95 | 24 | 70 | 1 | 25.5% | 74.5% | 0.5 | 11.3 |
|
||||
| timmy | 28 | 15 | 11 | 2 | 57.7% | 42.3% | 9.8 | 20.2 |
|
||||
| bezalel | 21 | 11 | 9 | 1 | 55.0% | 45.0% | 2.7 | 8.0 |
|
||||
| allegro | 21 | 7 | 11 | 3 | 38.9% | 61.1% | 31.1 | 20.2 |
|
||||
| ezra | 8 | 2 | 3 | 3 | 40.0% | 60.0% | 4.4 | 16.8 |
|
||||
| kimi | 6 | 3 | 3 | 0 | 50.0% | 50.0% | 39.5 | 0.5 |
|
||||
| manus | 6 | 5 | 1 | 0 | 83.3% | 16.7% | 0.0 | 18.8 |
|
||||
| codex | 2 | 2 | 0 | 0 | 100.0% | 0.0% | 2.3 | — |
|
||||
|
||||
## Per-Repo Merge Rate
|
||||
|
||||
| Repo | Total PRs | Merged | Merge Rate |
|
||||
|---|---|---:|---:|
|
||||
| the-nexus | 985 | 501 | 51.0% |
|
||||
| hermes-agent | 519 | 128 | 25.0% |
|
||||
| timmy-config | 404 | 140 | 35.0% |
|
||||
| timmy-home | 270 | 104 | 39.0% |
|
||||
| fleet-ops | 266 | 84 | 32.0% |
|
||||
| the-beacon | 175 | 62 | 35.0% |
|
||||
| the-door | 153 | 31 | 20.0% |
|
||||
| second-son-of-timmy | 111 | 82 | 74.0% |
|
||||
| compounding-intelligence | 50 | 9 | 18.0% |
|
||||
| the-playground | 44 | 2 | 5.0% |
|
||||
| burn-fleet | 38 | 2 | 5.0% |
|
||||
| timmy-academy | 12 | 6 | 50.0% |
|
||||
|
||||
## Methodology
|
||||
|
||||
- **Agent classification** uses three signals in priority order:
|
||||
1. Explicit title tag (e.g. `[Claude]`, `[Ezra]`)
|
||||
2. Branch name containing agent name (e.g. `claude/issue-123`)
|
||||
3. Git user (`claude` → claude, `Rockachopa` → burn-loop)
|
||||
- **Merge rate** = merged / (merged + closed_unmerged). Open PRs are excluded.
|
||||
- **Rejection rate** = closed_unmerged / (merged + closed_unmerged).
|
||||
- **Time metrics** are computed from created_at to merged_at / closed_at.
|
||||
|
||||
## Raw Data
|
||||
|
||||
```json
|
||||
{
|
||||
"burn-loop": {
|
||||
"total_prs": 1733,
|
||||
"merged": 346,
|
||||
"closed_unmerged": 1239,
|
||||
"open": 148,
|
||||
"merge_rate": 0.218,
|
||||
"rejection_rate": 0.782,
|
||||
"avg_hours_to_merge": 18.9,
|
||||
"avg_hours_to_close": 20.6,
|
||||
"repos": [
|
||||
"burn-fleet",
|
||||
"compounding-intelligence",
|
||||
"fleet-ops",
|
||||
"hermes-agent",
|
||||
"second-son-of-timmy",
|
||||
"the-beacon",
|
||||
"the-door",
|
||||
"the-nexus",
|
||||
"the-playground",
|
||||
"timmy-academy",
|
||||
"timmy-config",
|
||||
"timmy-home"
|
||||
]
|
||||
},
|
||||
"unknown": {
|
||||
"total_prs": 843,
|
||||
"merged": 598,
|
||||
"closed_unmerged": 214,
|
||||
"open": 31,
|
||||
"merge_rate": 0.736,
|
||||
"rejection_rate": 0.264,
|
||||
"avg_hours_to_merge": 2.3,
|
||||
"avg_hours_to_close": 11.3,
|
||||
"repos": [
|
||||
"fleet-ops",
|
||||
"hermes-agent",
|
||||
"second-son-of-timmy",
|
||||
"the-beacon",
|
||||
"the-door",
|
||||
"the-nexus",
|
||||
"timmy-academy",
|
||||
"timmy-config",
|
||||
"timmy-home"
|
||||
]
|
||||
},
|
||||
"claude": {
|
||||
"total_prs": 264,
|
||||
"merged": 138,
|
||||
"closed_unmerged": 121,
|
||||
"open": 5,
|
||||
"merge_rate": 0.533,
|
||||
"rejection_rate": 0.467,
|
||||
"avg_hours_to_merge": 3.3,
|
||||
"avg_hours_to_close": 6.2,
|
||||
"repos": [
|
||||
"hermes-agent",
|
||||
"the-nexus",
|
||||
"timmy-config",
|
||||
"timmy-home"
|
||||
]
|
||||
},
|
||||
"gemini": {
|
||||
"total_prs": 95,
|
||||
"merged": 24,
|
||||
"closed_unmerged": 70,
|
||||
"open": 1,
|
||||
"merge_rate": 0.255,
|
||||
"rejection_rate": 0.745,
|
||||
"avg_hours_to_merge": 0.5,
|
||||
"avg_hours_to_close": 11.3,
|
||||
"repos": [
|
||||
"hermes-agent",
|
||||
"the-nexus",
|
||||
"timmy-config",
|
||||
"timmy-home"
|
||||
]
|
||||
},
|
||||
"timmy": {
|
||||
"total_prs": 28,
|
||||
"merged": 15,
|
||||
"closed_unmerged": 11,
|
||||
"open": 2,
|
||||
"merge_rate": 0.577,
|
||||
"rejection_rate": 0.423,
|
||||
"avg_hours_to_merge": 9.8,
|
||||
"avg_hours_to_close": 20.2,
|
||||
"repos": [
|
||||
"burn-fleet",
|
||||
"hermes-agent",
|
||||
"the-nexus",
|
||||
"timmy-config",
|
||||
"timmy-home"
|
||||
]
|
||||
},
|
||||
"bezalel": {
|
||||
"total_prs": 21,
|
||||
"merged": 11,
|
||||
"closed_unmerged": 9,
|
||||
"open": 1,
|
||||
"merge_rate": 0.55,
|
||||
"rejection_rate": 0.45,
|
||||
"avg_hours_to_merge": 2.7,
|
||||
"avg_hours_to_close": 8.0,
|
||||
"repos": [
|
||||
"burn-fleet",
|
||||
"hermes-agent",
|
||||
"the-beacon",
|
||||
"the-nexus",
|
||||
"timmy-config",
|
||||
"timmy-home"
|
||||
]
|
||||
},
|
||||
"allegro": {
|
||||
"total_prs": 21,
|
||||
"merged": 7,
|
||||
"closed_unmerged": 11,
|
||||
"open": 3,
|
||||
"merge_rate": 0.389,
|
||||
"rejection_rate": 0.611,
|
||||
"avg_hours_to_merge": 31.1,
|
||||
"avg_hours_to_close": 20.2,
|
||||
"repos": [
|
||||
"burn-fleet",
|
||||
"hermes-agent",
|
||||
"the-beacon",
|
||||
"the-nexus",
|
||||
"timmy-config",
|
||||
"timmy-home"
|
||||
]
|
||||
},
|
||||
"ezra": {
|
||||
"total_prs": 8,
|
||||
"merged": 2,
|
||||
"closed_unmerged": 3,
|
||||
"open": 3,
|
||||
"merge_rate": 0.4,
|
||||
"rejection_rate": 0.6,
|
||||
"avg_hours_to_merge": 4.4,
|
||||
"avg_hours_to_close": 16.8,
|
||||
"repos": [
|
||||
"burn-fleet",
|
||||
"fleet-ops",
|
||||
"timmy-config",
|
||||
"timmy-home"
|
||||
]
|
||||
},
|
||||
"kimi": {
|
||||
"total_prs": 6,
|
||||
"merged": 3,
|
||||
"closed_unmerged": 3,
|
||||
"open": 0,
|
||||
"merge_rate": 0.5,
|
||||
"rejection_rate": 0.5,
|
||||
"avg_hours_to_merge": 39.5,
|
||||
"avg_hours_to_close": 0.5,
|
||||
"repos": [
|
||||
"hermes-agent",
|
||||
"the-nexus",
|
||||
"timmy-home"
|
||||
]
|
||||
},
|
||||
"manus": {
|
||||
"total_prs": 6,
|
||||
"merged": 5,
|
||||
"closed_unmerged": 1,
|
||||
"open": 0,
|
||||
"merge_rate": 0.833,
|
||||
"rejection_rate": 0.167,
|
||||
"avg_hours_to_merge": 0.0,
|
||||
"avg_hours_to_close": 18.8,
|
||||
"repos": [
|
||||
"the-nexus",
|
||||
"timmy-config"
|
||||
]
|
||||
},
|
||||
"codex": {
|
||||
"total_prs": 2,
|
||||
"merged": 2,
|
||||
"closed_unmerged": 0,
|
||||
"open": 0,
|
||||
"merge_rate": 1.0,
|
||||
"rejection_rate": 0.0,
|
||||
"avg_hours_to_merge": 2.3,
|
||||
"avg_hours_to_close": null,
|
||||
"repos": [
|
||||
"timmy-config",
|
||||
"timmy-home"
|
||||
]
|
||||
}
|
||||
}
|
||||
```
|
||||
|
||||
Reference in New Issue
Block a user